Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 26 Nov 2006 15:04:44 +1100
From:      "Mark Jose" <mwjose@optusnet.com.au>
To:        <freebsd-questions@freebsd.org>
Subject:   RE: dmesg; modem?
Message-ID:  <001d01c71110$02408440$0400a8c0@maf>
In-Reply-To: <20061125191430.7yq9n3rlcs8g8c0w@webmails.hosting-advantage.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Does kppp keep a log somewhere? You have sio0 and sio1 so you should also
have a /dev/ttyd0 & ttyd1 for those.
Check your /etc/ttys to see if the ttyd0 is being used by something else.
I guess we need more information - have you checked the /var/log/messages?
Anything in there?


-----Original Message-----
From: owner-freebsd-questions@freebsd.org
[mailto:owner-freebsd-questions@freebsd.org] On Behalf Of
Ranger@oldpathsbaptistchurch.org
Sent: Sunday, 26 November 2006 2:15 PM
To: freebsd-questions@freebsd.org
Subject: dmesg; modem?


  Greetings to all again,

I'm including my dmesg output, and asking for help figuring out my problem
finding the modem.

---------------------begin dmesg------------------
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Sun May  7 04:42:56 UTC 2006
    root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (497.84-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
 
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR,SSE>
real memory  = 167759872 (159 MB)
avail memory = 154464256 (147 MB)
kbd1 at kbdmux0
acpi0: <IBM CDTPWSNV> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfd08-0xfd0b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xec000000-0xefffffff
at
device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376 at device 2.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xff00-0xff1f irq 11
at
device 2.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 2.3 (no driver attached)
fxp0: <Intel 82558 Pro/100 Ethernet> port 0x7c60-0x7c7f mem
0xf3eff000-0xf3efffff,0xf3f00000-0xf3ffffff irq 11 at device 3.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:06:29:45:3f:1c
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3
on
acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sio0: <16550A-compatible COM port> port 0x3e8-0x3ef irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 3 on acpi0
sio1: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 497838327 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 6149MB <Maxtor 90651U2 FA520860> at ata0-master UDMA33
acd0: CDROM <CRD-8400B/1.10> at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s1a
----------------------end dmesg---------------

Kppp finds the modem, sometimes; then tries to initialize it.  That's as far
as
it gets.  It never dials.
I am stumped.

Please assist, and thank you.

Z. Wade Hampton
Twin Bridges, Montana
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001d01c71110$02408440$0400a8c0>