Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 24 Nov 1997 12:07:21 -0800 (PST)
From:      Doug White <dwhite@gdi.uoregon.edu>
To:        Kenny Hanson <khanson@pdspc.com>
Cc:        "Freebsd-Questions (E-mail)" <freebsd-questions@FreeBSD.ORG>
Subject:   Re: 440LX Chipset
Message-ID:  <Pine.BSF.3.96.971124120611.12844H-100000@gdi.uoregon.edu>
In-Reply-To: <91DD7FDA88E4D011BED00000C0DD87E714DFBF@pds-gateway.pdspc.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 21 Nov 1997, Kenny Hanson wrote:

> Is there support for the 440LX chipset in FreeBSD yet?
> I have an Intel Atlanta 440LX with a PII 300 that I would
> love to see crank some FreeBSD, but two subsequent 
> installs have failed miserably.  I'm only guessing it's the 
> chipset, though I always thought these things were "backwards
> compatible".  For grins, here's what I have in the system:

What were the problems you were seeing?

I have an older email that indicates there are some BIOS bugs in the 440LX
that prevent the system from booting properly. 

> Now I've tried to turn off the Ultra DMA in the bios and even tried
> a non-ATA33 drive with the same results.  Any thoughts/comments?

The Ultra33 drives are OK, they'll run fine in standard mode.  If you
really want to tap them you have to run -current.

Doug White                              | University of Oregon  
Internet:  dwhite@resnet.uoregon.edu    | Residence Networking Assistant
http://gladstone.uoregon.edu/~dwhite    | Computer Science Major





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.971124120611.12844H-100000>