Date: Thu, 7 Nov 2002 09:41:29 +0800 From: EZShell <ezshell@eastern.com.ph> To: RJ45 <rj45@slacknet.com>, freebsd-stable@freebsd.org Subject: Re: problem with ppp from 4.7-STABLE Message-ID: <200211070941.29808.ezshell@eastern.com.ph> In-Reply-To: <Pine.LNX.4.21.0211061443530.1118-100000@slacknet.slacknet.com> References: <Pine.LNX.4.21.0211061443530.1118-100000@slacknet.slacknet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello RJ45, What modem are you using? Also, did your isp give you a u/n:p/w=20 combo or did they give you ip info? I'm also on fixed ip DSL. No u/n:p/w was given and therefore, no=20 ppp required to connect. Just configured using the ip info given=20 by the isp. Using Alcatel Speed Touch Pro. David On Thursday 07 November 2002 05:51, RJ45 wrote: > Hello, > I have a problem with ppp, at least 2 other person reported > this same problem in freebsd-questions. > > ppp hangs after a few days of running. > I use it to establish a PPPoE connection for my ADSL line. > After 3 or 4 days ppp get freezed. > ppp continue running and ifconfig reports: > tun0: flags=3D8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492 > inet 80.116.24.247 --> 192.168.100.1 netmask 0xffffffff > Opened by PID 69 > > but if I ping 192.168.100.1 it does not respond. > I must kill and restart ppp with papchap authentication and > then it comes back working again. MY ISP says his hardware is > functioning well and there are no problems on the ADSL line. > THis problem is really annoying because from time to time I > found myself disconnected without being able to track the > problem. > THere is only this strange line in ppp.log > > Nov 6 15:45:37 durlindana ppp[24369]: Phase: deflink: Enter > pause (3) for redialing. > > I can't really understand what's happening. > anyone has some hints? > thanks > > Rick > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200211070941.29808.ezshell>