Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 23 Aug 1999 16:57:12 +0200 (CEST)
From:      Christoph Kukulies <kuku@gilberto.physik.RWTH-Aachen.DE>
To:        freebsd-isdn@freebsd.org
Subject:   isic0 not found at 0x340
Message-ID:  <199908231457.QAA41775@gil.physik.rwth-aachen.de>

next in thread | raw e-mail | index | archive | help

OK, I downloaded i4b 0.83 beta and overinstalled it over a 3.2
system. Still I'm getting isic 0 not found with my AVM A1 (!Fritzcard).
But this kernel config file used to work under 2.2.8 with i4b 0.63 100798 .

Help!

-- 
Chris Christoph P. U. Kukulies kuku@gil.physik.rwth-aachen.de
#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# For more information read the handbook part System Administration -> 
# Configuring the FreeBSD Kernel -> The Configuration File. 
# The handbook is available in /usr/share/doc/handbook or online as
# latest version from the FreeBSD World Wide Web server 
# <URL:http://www.FreeBSD.ORG/>;
#
# An exhaustive list of options and more detailed explanations of the 
# device lines is present in the ./LINT configuration file. If you are 
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
#	$Id: GENERIC,v 1.77.2.22 1998/03/24 01:20:14 jkh Exp $

machine		"i386"
cpu		"I486_CPU"
ident		MONKAVMIFB
maxusers	64

options		MATH_EMULATE		#Support for x87 emulation
options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
options		NFS			#Network Filesystem
options		MSDOSFS			#MSDOS Filesystem
##options		"CD9660"		#ISO 9660 Filesystem
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
options		SCSI_DELAY=15000		#Be pessimistic about Joe SCSI device
options		UCONSOLE		#Allow users to grab the console
options		FAILSAFE		#Be conservative
options		USERCONFIG		#boot -c editor
options		VISUAL_USERCONFIG	#visual boot -c editor
options         SYSVSHM
options		SHMMAXPGS=4096
options         "SHMMAX=(SHMMAXPGS*PAGE_SIZE+1)"

options IPDIVERT
options IPFIREWALL
options IPFIREWALL_VERBOSE

config		kernel	root on wd0

controller	isa0
controller	pci0

controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk		fd0	at fdc0 drive 0

controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
disk		wd0	at wdc0 drive 0

options		ATAPI		#Enable ATAPI support for IDE bus
options		ATAPI_STATIC	#Don't do it as an LKM
options		ATAPI		#Enable ATAPI support for IDE bus
options		ATAPI_STATIC	#Don't do it as an LKM
device		acd0		#IDE CD-ROM

# A single entry for any of these controllers (ncr, ahb, ahc, amd) is
# sufficient for any number of installed devices.
#
# Note: The dpt driver is present in this release but was left disabled
# due to its relatively late entry (it's almost certainly benign to enable
# it but we didn't want to risk any chance of destabilizing 2.2.6).  To
# enable DPT support, uncomment the dpt0 controller entry and the two
# options DPTOPT and DPT_MEASURE_PERFORMANCE entries below.

controller	ncr0
controller	scbus0

device		da0

device		sa0

device		pass0

device		cd0	#Only need one of these, the code dynamically grows


# atkbdc0 controlls both the keyboard and the PS/2 mouse
controller	atkbdc0	at isa? port IO_KBD tty
device		atkbd0	at isa? tty irq 1
device		psm0	at isa? tty irq 12

device		vga0	at isa? port ? conflicts

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? tty
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa? port "IO_KBD" tty irq 1 vector pcrint
#options		XSERVER			# support for X server
#options		FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options		PCVT_SCANSET=2		# IBM keyboards are non-std

# Mandatory, don't remove
device		npx0	at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr

device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr

# Parallel port
device		ppc0	at isa? port? flags 0x40 net irq 7
controller	ppbus0
device		lpt0	at ppbus?
device		plip0	at ppbus?
device		ppi0	at ppbus?

device		fxp0

##controller snd0

##device gus0 at isa? port 0x220 irq 12 drq 1 flags 0x3 vector gusintr

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
device le0 at isa? port 0x200 net irq 10 iomem 0xd0000 vector le_intr
#
#   Copyright (c) 1997, 1998 Hellmuth Michaelis. All rights reserved.
#
#   Redistribution and use in source and binary forms, with or without
#   modification, are permitted provided that the following conditions
#   are met:
#
#   1. Redistributions of source code must retain the above copyright
#      notice, this list of conditions and the following disclaimer.
#   2. Redistributions in binary form must reproduce the above copyright
#      notice, this list of conditions and the following disclaimer in the
#      documentation and/or other materials provided with the distribution.
#   3. Neither the name of the author nor the names of any co-contributors
#      may be used to endorse or promote products derived from this software
#      without specific prior written permission.
#   4. Altered versions must be plainly marked as such, and must not be
#      misrepresented as being the original software and/or documentation.
#   
#   THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
#   ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
#   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
#   ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
#   FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
#   DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
#   OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
#   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
#   LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
#   OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
#   SUCH DAMAGE.
#
#---------------------------------------------------------------------------
#
#	i4b FreeBSD kernel configuration
#	--------------------------------
#
#	last edit-date: [Fri Jun 19 10:44:03 1998]
#
#	$Id: CONFIG,v 1.14 1998/06/19 09:26:07 hm Exp $
#
#	-hm	cvs
#	-hm	PPP
#	-hm	hardware options patch from Gary
#
#---------------------------------------------------------------------------
#
# i4b passive ISDN cards support (isic - I4b Siemens Isdn Chipset driver)
# note that the ``options'' and ``device'' lines must BOTH be defined !
# Teles S0/8 or Niccy 1008
#options "TEL_S0_8"
#device	isic0 at isa?            iomem 0xd0000 net irq 5 flags 0x01 vector isicintr 
# Teles S0/16 or Creatix ISDN-S0 or Niccy 1016
#options "TEL_S0_16"
#device	isic0 at isa? port 0xd80 iomem 0xd0000 net irq 5 flags 0x02 vector isicintr 
# Teles S0/16.3 
#options "TEL_S0_16_3"
#device	isic0 at isa? port 0xd80               net irq 5 flags 0x04 vector isicintr 
# AVM A1 or AVM Fritz!Card
options "AVM_A1"
device	isic0 at isa? port 0x340               net irq 5 flags 0x08 vector isicintr
# Teles S0/16.3 PnP
#options "TEL_S0_16_3_P"
#device	isic0 at isa? port 0x580               net irq 5 flags 0x10 vector isicintr 
# Creatix ISDN-S0 P&P
#options "CRTX_S0_P"
#device	isic0 at isa? port 0x120               net irq 5 flags 0x11 vector isicintr 
# USRobotics Sportster ISDN TA intern
#options "USR_STI"
#device isic0 at isa? port 0x268               net irq 5 flags 0x12 vector isicintr
# Dr. Neuhaus Niccy Go@
#options "DRN_NGO"
#device isic0 at isa? port 0x200               net irq 5 flags 0x14 vector isicintr 
# Sedlbauer Win Speed
#options "SEDLBAUER"
#device isic0 at isa? port 0x100               net irq 11 flags 0x18 vector isicintr 
# Dynalink IS64PH
#options "DYNALINK"
#device isic0 at isa? port 0x100               net irq 5 flags 0x15 vector isicintr

# needed for ISDN PnP cards
#options "I4B_PNP"

# AVM PCMCIA Fritz!Card
#options "AVM_A1_PCMCIA"

# i4b active ISDN cards support
# Stollmann Tina-dd control device
#device tina0 at isa? port 0x260               net irq 10 vector tinaintr

# i4b passive cards D channel handling
# Q.921
pseudo-device	"i4bq921"
# Q.931
pseudo-device	"i4bq931"

# common passive and active layer 4
# layer 4
pseudo-device	"i4b"

# userland driver to do ISDN tracing (for passive cards oly)
pseudo-device   "i4btrc"	4
# userland driver to control the whole thing
pseudo-device   "i4bctl"
# userland driver for access to raw B channel
pseudo-device   "i4brbch"       4
# userland driver for telephony
pseudo-device   "i4btel"        2
# network driver for IP over raw HDLC ISDN
pseudo-device   "i4bipr"	4
# enable VJ header compression detection for ipr i/f
options		IPR_VJ
# network driver for sync PPP over ISDN
pseudo-device	"i4bisppp"	4
pseudo-device	sppp		4

pseudo-device	loop
pseudo-device	ether
pseudo-device	bpfilter 4
pseudo-device	sl	1
pseudo-device	ppp	1
###pseudo-device	vn	1
pseudo-device	tun	1
pseudo-device	pty	16
pseudo-device	gzip		# Exec gzipped a.out's
pseudo-device	speaker
pseudo-device	pca


# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options		KTRACE		#kernel tracing

# This provides support for System V shared memory.
#
options         SYSVSHM


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199908231457.QAA41775>