Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 2 May 2010 14:55:29 -0400
From:      Gardner Bell <gbell72@rogers.com>
To:        Jeremy Chadwick <freebsd@jdc.parodius.com>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: BCM5704 routing problem
Message-ID:  <20100502185529.GA1783@titan.home.lan>
In-Reply-To: <20100428192634.GA30303@icarus.home.lan>
References:  <20100428182556.GA1730@titan.home.lan> <20100428191901.GA30062@icarus.home.lan> <20100428192634.GA30303@icarus.home.lan>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Apr 28, 2010 at 12:26:34PM -0700, Jeremy Chadwick wrote:
> On Wed, Apr 28, 2010 at 12:19:01PM -0700, Jeremy Chadwick wrote:
> > On Wed, Apr 28, 2010 at 02:25:56PM -0400, Gardner Bell wrote:
> > > I upgraded my gateway last week to RELENG_8 and noticed that I can no
> > > longer forward or receive IP packets from hosts on internal LAN.  When
> > > trying to ping a host or the gateway IP itself, you get.
> > > 
> > > # ping 192.168.1.10
> > > PING 192.168.1.10 (192.168.1.10): 56 data bytes
> > > ^C
> > > 
> > > --- 192.168.1.10 ping statistics ---
> > > 5 packets transmitted, 0 packets received, 100% packet loss 
> > > 
> > > All rc.conf files on gateway and hosts themselves had correct settings.
> > > 
> > > bge1@pci0:10:9:1:       class=0x020000 card=0x164414e4 chip=0x164814e4
> > > rev=0x03 hdr=0x00
> > >     vendor     = 'Broadcom Corporation'
> > >     device     = 'NetXtreme Dual Gigabit Adapter (BCM5704)'
> > >     class      = network
> > >     subclass   = ethernet
> > >     bar   [10] = type Memory, range 64, base 0xdf330000, size 65536,
> > > enabled
> > >     bar   [18] = type Memory, range 64, base 0xdf320000, size 65536,
> > > enabled
> > >     cap 07[40] = PCI-X 64-bit supports 133MHz, 2048 burst read, 1 split
> > > transaction
> > >     cap 01[48] = powerspec 2  supports D0 D3  current D0
> > >     cap 03[50] = VPD
> > >     cap 05[58] = MSI supports 8 messages, 64 bit
> > > 
> > > Previously I was running 7.2 as gateway and never encountered any
> > > problems.  I've since gone back to release 7.3 and routing works as
> > > expected.
> > > 
> > > Any input would be appreciated.
> > 
> > Output from the following when the machine is running RELENG_8:
> > 
> > - ifconfig -a
> > - netstat -i
> > - netstat -rn
> > - sysctl -a | grep bge
> > - Contents of /etc/rc.conf
> 
> I forgot one more:
> 
> dmesg | grep -C 10 bge1
> 
Just wanted to follow up to say that I got RELENG_8 to work.  Thanks
anyway.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100502185529.GA1783>