Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 29 Sep 2009 08:40:37 +0200
From:      Alex Dupre <ale@FreeBSD.org>
To:        Sam Leffler <sam@freebsd.org>
Cc:        freebsd-current@freebsd.org
Subject:   Re: Atheros 9280 issue
Message-ID:  <4AC1ABE5.6090409@FreeBSD.org>
In-Reply-To: <4AC17F33.80800@freebsd.org>
References:  <4AC0BB4A.40201@FreeBSD.org> <4AC17F33.80800@freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Sam Leffler wrote:
>> Clients can connect to the AP, but obviously packets are dropped every
>> time the card is reset.
> 
> How do you know packets are dropped?  Nothing should be lost.

I'm pinging the access point from an associated wifi client: when this 
message appears one or two pings are lost. Previously, when such 
messages didn't appear, no pings were lost. Maybe the reply timeouts and 
is not completely lost, I'll do more tests asap.

> "every few seconds" is not helpful.

Actually the timing is highly variable, it may happen once a second, 
like once every 15 seconds or more. Usually (in the two hours I tried) 
every 2-5 seconds.

> Look for something else in the
> system that coincides w/ your msgs.  It's possible that periodic
> calibration done by the driver has a bad effect; you can turn it off by
> setting a sysctl (look at sysctl -a and/or the driver code).

hw.ath.shortcal = 0, right?

I'll try, I haven't done additional tests before knowing what would be 
useful for debugging.

--
Alex Dupre



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4AC1ABE5.6090409>