Date: Thu, 31 Oct 2002 11:06:55 -0600 From: =?iso-8859-1?Q?Braulio_Jos=E9_Solano_Rojas?= <braulio@bsolano.com> To: <freebsd-hackers@FreeBSD.ORG> Cc: <freebsd-hardware@FreeBSD.ORG>, <freebsd-questions@FreeBSD.ORG> Subject: Re: Intel PCI Modem Message-ID: <00aa01c280ff$ed4d30f0$b13aa5d0@azul>
next in thread | raw e-mail | index | archive | help
Hi!
About this:
> I have an "Intel V92 HaM Data Fax Voice" Modem. It is a hardware based
> modem. Mi pnpbios recognizes it as "Simple COMM. controler IRQ12".
>
> I would like to hack sio.c in order to get it working. Therefore I think
I
> should add an entry to pci_ids[] like:
> {hex x, "Intel V92 HaM Data Fax Voice", hex y}
>
> But I do not know what are hex x and hex y, or if it is going to work.
>
> With dmesg I can see this:
> pci0 <unknown card> (vendor=0x1813, dev=0x4000) at 9.0 irq 12
>
> And if I do pciconf -l:
> none0@pci0:9:0: class=0x078000 card=0x00000000 chip=0x40001813 rev=0x02
> hdr=0x00
I have found that my modem is in /usr/share/misc/pci_vendors, and if I do a
pciconf -lv, I get:
none0@pci0:9:0: class=0x078000 card=0x00000000 chip=0x40001813 rev=0x02
hdr=0x00
vendor = 'Ambient Technologies Inc'
device = 'Creatix V.90 HaM Modem'
class = simple comms
It does not have a subclass, is this why I don't see it at boot?
> My questions are:
> * What are hex x and hex y?
> * If I hack sio.c like I intend to, is my modem going to work?
> * If so, would be the following line correct in my kernel configuration
> file:
> device sio2 at isa? port IO_COM3 irq 12
> ?
Or do I need a special driver? If this is needed maybe I can try to program
one, even if I have to learn lots of technical stuff.
Please be gentle, I am not used to technical discussions of FreeBSD. I
would like very much to see my modem working, therefore I will appreciate
very much your help.
Best regards,
Braulio Solano
Developer - Costa Rica
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00aa01c280ff$ed4d30f0$b13aa5d0>