Date: Sat, 27 Jan 2001 19:37:31 -0600 (CST) From: Adam Simpson <adam2@apollo.netsonic.net> To: freebsd-questions@FreeBSD.ORG Subject: Re: another Q - EZ-17 Changer and Mammoth2 Tape Drive - anyone using with success?? Message-ID: <Pine.BSF.3.95q.1010127193711.1067A-100000@apollo.netsonic.net> In-Reply-To: <20010127172841.B890@dan.emsphone.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I get this in the dmesg output st0(ahc0:1:0): NOT READY asc:3a,0 Medium not present ch0(ahc0:0:0): NOT READY asc:4,8d Vendor Specific ASCQ st0(ahc0:1:0): NOT READY asc:3a,0 Medium not present st0(ahc0:1:0): NOT READY asc:3a,0 Medium not present ch0(ahc0:0:0): NOT READY asc:4,8d Vendor Specific ASCQ and pretty much the same in /var/log messages. Jan 27 14:06:07 hades /kernel: st0(ahc0:1:0): NOT READY asc:3a,0 Medium not present Jan 27 14:16:57 hades /kernel: st0(ahc0:1:0): NOT READY asc:3a,0 Medium not present Jan 27 15:00:01 hades ntpdate[16900]: adjust time server 192.43.244.18 offset 0.013181 Jan 27 16:00:00 hades ntpdate[17601]: adjust time server 192.43.244.18 offset 0.003766 Jan 27 16:47:36 hades su: adam to root on /dev/ttyp1 Jan 27 16:47:45 hades /kernel: ch0(ahc0:0:0): NOT READY asc:4,8d Vendor Specific ASCQ Jan 27 16:48:43 hades /kernel: ch0(ahc0:0:0): NOT READY asc:4,8d Vendor Specific ASCQ Jan 27 16:49:18 hades last message repeated 2 times Jan 27 16:49:24 hades /kernel: st0(ahc0:1:0): NOT READY asc:3a,0 Medium not present Jan 27 16:49:31 hades /kernel: st0(ahc0:1:0): NOT READY asc:3a,0 Medium not present Jan 27 16:49:31 hades /kernel: ch0(ahc0:0:0): NOT READY asc:4,8d Vendor Specific ASCQ Jan 27 17:00:01 hades ntpdate[17040]: adjust time server 192.43.244.18 offset 0.015980 Jan 27 17:05:04 hades /kernel: st0(ahc0:1:0): NOT READY asc:3a,0 Medium On Sat, 27 Jan 2001, Dan Nelson wrote: > In the last episode (Jan 27), Adam Simpson said: > > hmm.. ok Im must be missing somthing simple here.. If I do a mt > > rewoffl > > > > It ejects the tape from the drive, but the it stays with the picker > > sittung right in front of the drive.. trying chio move drive 0 slot > > 1 gives the below.. do I not need the mt reoffl first to eject the > > tape from the drive? > > > > operator@hades [5:06pm] /hold > chio move drive 0 slot 1 > > chio: /dev/ch0: CHIOMOVE: Device busy > > Hm. That definitely should have worked. You do need to manually > rewoffl the drive, since most changers can't directly control the tape > drive that's attached to them. Do you get any debugging messages > logged to the console or /var/log/messages? You might need to boot the > kernel in verbose mode to see them (set boot_verbose="YES" in > /boot/loader.conf if you're running 4.*, otherwise type in "kernel -v" > at the boot prompt). > > -- > Dan Nelson > dnelson@emsphone.com > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.95q.1010127193711.1067A-100000>