Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 11 Feb 2000 14:14:09 -0500
From:      Peter Radcliffe <pir@pir.net>
To:        freebsd-mobile@freebsd.org, scsi@FreeBSD.ORG
Subject:   Re: Adaptec 1460B, PAO3 and cdrom drive problems.
Message-ID:  <20000211141408.C14877@pir.net>

next in thread | raw e-mail | index | archive | help
Accidentally sent this to scsi, mobile and freebsd-mobile, so it bounced.

P.

----- Forwarded message from Peter Radcliffe <pir@pir.net> -----
"Kenneth D. Merry" <ken@kdm.org> probably said:
> On Fri, Feb 11, 2000 at 11:13:21 -0500, Peter Radcliffe wrote:
> > I just can't mount any scsi cdrom drives :/
> > Disks work fine, all the scsi kernel entries in place, the scsi cdrom
> > device is seen but doing anything with /dev/cd0* gives me "device
> > not configured" :/
> 
> Is your CD drive probed?  Does it show up in the dmesg?  Can you send your
> dmesg output?

Yes, yes, and yes.
Heres what I sent to mobile origionally about this.

Thanks,
P.

Peter Radcliffe <pir@pir.net> probably said:
> options         SCSI_DELAY=8000 #Be pessimistic about Joe SCSI device
> controller      aic0    at isa? port ? cam irq ? disable
> controller      scbus0
> device          da0     #SCSI direct access devices (aka disks)
> device          sa0     #SCSI tapes
> device          pass0   #CAM passthrough driver
> device          cd0     #Only need one of these, the code dynamically grows
> device pt0 at scbus?    # SCSI processor type
> 
> 
> Card inserted, slot 0
> Feb  6 00:00:13 disapp pccardd[81]: Card "Adaptec, Inc."("APA-1460 SCSI
>  Host Adapter") [Version 0.01] [(null)] matched "Adaptec, Inc\."
>  ("APA-1460.*") [(null)] [(null)] 
> card0: assign aic0 iobase 0x340 irq 7
> aic0: aic6360, dma, disconnection, parity check
> da0 at aic0 bus 0 target 3 lun 0
> da0: <SEAGATE ST31200N 8648> Fixed Direct Access SCSI-2 device 
> da0: 5.000MB/s transfers (5.000MHz, offset 8), Tagged Queueing Enabled
> da0: 1006MB (2061108 512 byte sectors: 64H 32S/T 1006C)
> 
> pir@disapp# mount /dev/da0s1e /mnt
> pir@disapp# df /mnt
> Filesystem   1K-blocks     Used    Avail Capacity  Mounted on
> /dev/da0s1e     998367   700337   218161    76%    /mnt
> pir@disapp# ls -aFl /mnt
> total 700338
> drwxr-xr-x   2 root  wheel        512 Feb  5 18:09 ./
> drwxr-xr-x  22 root  wheel        512 Feb  6 00:00 ../
> -rw-------   1 root  wheel   39413760 Feb  5 17:48 disapp..dump
> -rw-------   1 root  wheel  645324800 Feb  5 18:09 disapp.usr.dump
> -rw-------   1 root  wheel   32010240 Feb  5 18:09 disapp.var.dump
> pir@disapp# umount /mnt
> 
> <eject card>
> <move to scsi cdrom drive>
> <insert card>
> [...]
> cd0 at aic0 bus 0 target 6 lun 0
> cd0: <TOSHIBA XM5701TASUN12XCD 0997> Removable CD-ROM SCSI-2 device 
> cd0: 5.000MB/s transfers (5.000MHz, offset 8)
> cd0: cd present [1318424 x 512 byte records]
> 
> pir@disapp# mount_cd9660 /dev/cd0a /mnt
> mount_cd9660: Device not configured
> pir@disapp# cdcontrol -f /dev/cd0a eject
> cdcontrol: no disc in drive /dev/cd0a
> pir@disapp# mount_cd9660 /dev/cd0c /mnt
> mount_cd9660: Device not configured
> pir@disapp# cdcontrol -f /dev/cd0c eject
> cdcontrol: no disc in drive /dev/cd0a
----- End forwarded message -----

-- 
pir                  pir@pir.net                    pir@net.tufts.edu



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000211141408.C14877>