Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 21 May 1999 00:37:07 -0400 (EDT)
From:      "Crist J. Clark" <cjc@cc942873-a.ewndsr1.nj.home.com>
To:        kf7nn1@cybertrails.com (george vagner)
Cc:        cjclark@home.com, N8uReStorm@aol.com, freebsd-questions@FreeBSD.ORG
Subject:   Re: Question about Intel Networking Card
Message-ID:  <199905210437.AAA20720@cc942873-a.ewndsr1.nj.home.com>
In-Reply-To: <000d01bea33f$ad067020$0300a8c0@ginger.kf7nn.com> from george vagner at "May 20, 99 09:09:09 pm"

next in thread | previous in thread | raw e-mail | index | archive | help
george vagner wrote,
> the last time the ether express 16 isa 10mb version
> worked for me was 2.2.2 after that it just would not work
> although it said it was working. ping forever.....

I'm connected to one of my machines with one of those cards right now:

% dmesg | grep ex0
ex0 at 0x300-0x30f irq 10 on isa
ex0: Intel EtherExpress Pro/10, address 00:aa:00:6f:d7:28, connector TPE
%  uname -mrs
FreeBSD 2.2.8-STABLE i386

It works fine for me on 2.2.8.

> i am now using the fxp0 device on a pci bus and it works great.

I've got two of those on another machine I'm logged into:

% dmesg | grep fxp
fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 5 int a irq 5 on pci0:17:0
fxp0: Ethernet address 00:90:27:13:ae:7e
fxp1 <Intel EtherExpress Pro 10/100B Ethernet> rev 1 int a irq 9 on pci0:19:0
fxp1: Ethernet address 00:a0:c9:22:93:d0, 10Mbps

One is 10Mb/s (a 82557-based card), and one is 100Mb/s (a 82558-based
card). They both work fine... Now. I was posting questions about them
earlier this week. I practically had to use a mallot to drive them
into the slots. Their status lights came up (at their end and at the
other end of the CAT5 wire), but they were not properly installed in
the machine. Once I warped the motherboard forcing them in, all worked
wonderfully. 
-- 
Crist J. Clark                           cjclark@home.com


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199905210437.AAA20720>