Date: Fri, 28 Jun 2002 14:49:10 -0700 (PDT) From: <hdhillon@ixsystems.net> To: <freebsd-questions@FreeBSD.ORG> Subject: Re: Adaptec ANA-62044 4-port Ethernet Message-ID: <34900.206.40.55.68.1025300950.squirrel@support.IXSYSTEMS.NET>
next in thread | raw e-mail | index | archive | help
------=_h(NDPMJsgUSz'CRl.Cj_Q_,.5sJDTd3dXY4IZsDzcL8cfaa)w'E.XQDEqR3g
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
Hi
I have weird problem with FreeBSD 4.4 and Adaptec ANA-62044 4-port
ethernet card. This system has two onboard NICs with Adaptec ethernet card
installed on PCI slot. The FreeBSD kernel detects only 3 ports of 4-port
ethernet card. It assigns device names sf0, sf1 and sf2 to port 1, 2 and 3
respectively and fxp0 and fxp1 to onboard NICs. The dmesg output is attached
with this email. By looking at dmesg, it seems that kernel is assigning sa0
device name to two ports at a same time and one port doesn't even have the
MAC address as it is showing ff:ff:ff:ff:ff:ff as MAC address.
Does anybody had any idea what might be wrong here ?? I tried two NICs,
both have the same problem.
Thanks
Harpreet
------=_h(NDPMJsgUSz'CRl.Cj_Q_,.5sJDTd3dXY4IZsDzcL8cfaa)w'E.XQDEqR3g
Content-Type: text/plain; name="dmesg_freebsd.txt"
Content-Disposition: attachment; filename="dmesg_freebsd.txt"
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1402.48-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 267255808 (260992K bytes)
avail memory = 255619072 (249628K bytes)
Preloaded elf kernel "kernel" at 0xc0480000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 14 entries at 0xc00f3b50
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel model 1132 VGA-compatible display device> at 2.0 irq 0
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <DEC 21154 PCI-PCI bridge> at device 5.0 on pci1
pci2: <PCI bus> on pcib2
sf0: <Adaptec ANA-62044 10/100BaseTX> port 0xbe00-0xbeff mem 0xfe200000-0xfe27ffff irq 11 at device 4.0 on pci2
sf0: reset never completed!
sf0: Ethernet address: ff:ff:ff:ff:ff:ff
sf0: MII without any phy!
device_probe_and_attach: sf0 attach returned 6
sf0: <Adaptec ANA-62044 10/100BaseTX> port 0xb000-0xb0ff mem 0xfe300000-0xfe37ffff irq 11 at device 5.0 on pci2
sf0: Ethernet address: 00:00:d1:ee:57:06
miibus0: <MII bus> on sf0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf1: <Adaptec ANA-62044 10/100BaseTX> port 0xb400-0xb4ff mem 0xfe380000-0xfe3fffff irq 5 at device 6.0 on pci2
sf1: Ethernet address: 00:00:d1:ee:57:07
miibus1: <MII bus> on sf1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf2: <Adaptec ANA-62044 10/100BaseTX> port 0xb800-0xb8ff mem 0xfe480000-0xfe4fffff irq 11 at device 7.0 on pci2
sf2: Ethernet address: 00:00:d1:ee:57:08
miibus2: <MII bus> on sf2
ukphy2: <Generic IEEE 802.3u media interface> on miibus2
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: <Intel Pro/100 Ethernet> port 0xd400-0xd43f mem 0xfe9fe000-0xfe9fefff irq 5 at device 8.0 on pci1
fxp0: Ethernet address 00:e0:81:21:33:52
inphy0: <i82562EM 10/100 media interface> on miibus3
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xd800-0xd83f mem 0xfe800000-0xfe8fffff,0xfe9ff000-0xfe9fffff irq 10 at device 11.0 on pci1
fxp1: Ethernet address 00:e0:81:21:33:53
inphy1: <i82555 10/100 media interface> on miibus4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 11
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xccfff,0xcd000-0xce7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 19092MB <ST320414A> [38792/16/63] at ata0-master UDMA100
acd0: CDROM <CD-224E> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
------=_h(NDPMJsgUSz'CRl.Cj_Q_,.5sJDTd3dXY4IZsDzcL8cfaa)w'E.XQDEqR3g--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?34900.206.40.55.68.1025300950.squirrel>