Date: Wed, 10 Jan 2001 17:39:19 +0100 From: Michel Talon <michel@lpthe.jussieu.fr> To: stable@FreeBSD.ORG Subject: Re: Intel PRO/100+ driver or hardware? (Update) Message-ID: <20010110173919.A311@lpthe.jussieu.fr> In-Reply-To: <179010000.979069635@grolsch.ai> References: <20010109130439.A48418@grumpy.dyndns.org> <179010000.979069635@grolsch.ai>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Jan 09, 2001 at 03:47:15PM -0400, Jeroen C. van Gelderen wrote: > > Hard to say if the problem is the hub or the Intel card. But seemingly > > the combination. Changing either to a different model and/or brand > > solves the problem? > > I tried 2 hubs, one claims to be a cheap 8816TPC, the other NetGear DS108. > Both give problems. Replacing the Intel card with a 3Com or SMC solves the > problem. Of course I've tried multiple cables as well. > > Maybe this is relevant. The DS108 actually is a dual speed hub. IIRC it has > a 10 Mbit bus and a 100 Mbit bus, connected with a little switch. The > machine I'm testing against has a 10Mbit card. I tried forcing to Intel to > 10Mbit and tried to transfer the file. It stalls after a couple of > megabytes. I then forced the Intel card to 100Mbit mode and tried the Just as a comparison point. I am at the moment playing installing 3 machines with resp. FreeBSD, NetBSD and OpenBSD. All 3 are connected by a small ultracheap 10MB/s hub to the net, and have Intel 10/100 cards. The FreeBSD and OpenBSD downloads were fine, but the NetBSD stalled horribly. I have tried all settings of half-duplex and full duplex without getting anything. At home i have a 3Com and i had similar stalls but solved by setting half-duplex. The settings that work are 10baseT/UTP. -- Michel Talon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010110173919.A311>