Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 27 Sep 2005 21:49:46 -0700
From:      Sam Leffler <sam@errno.com>
To:        Dillon <loveturtle@loveturtle.net>
Cc:        freebsd-current@freebsd.org
Subject:   Re: ath_hal ndis :/
Message-ID:  <433A20EA.2020206@errno.com>
In-Reply-To: <433A16C6.5000901@loveturtle.net>
References:  <433A0194.7050105@sapo.pt> <200509280941.13378.root@solink.ru> <433A16C6.5000901@loveturtle.net>

next in thread | previous in thread | raw e-mail | index | archive | help
Dillon wrote:
> Have you tried ath on 6? I'd try that before screwing around with ndis. 
> ath in 6 is much more feature full then in 5.

Channel 6 is in fact the only channel you can use turbo mode in 11g. 
However--as I've said many times--using turbo mode in 11g requires that 
the ap detect non-turbo stations in the vicinity and automatically drop 
out of turbo.  This switching back+forth between turbo and non-turbo 
operation is termed...dynamic turbo.  Note this is different 
from...static turbo...where the ap and station do not switch in+out of 
turbo operation.  There are other things to understand about turbo mode 
but for now you only need to know that the ath driver does not support 
dynamic turbo mode (in 11a or 11g) but does support static turbo mode 
(available only in 11a).  Hence if he wants to use turbo in 11g then he 
must use the ndis driver.

	Sam

> 
> Bachilo Dmitry wrote:
> 
>> В сообщении от Среда 28 Сентябрь 2005 09:36 
>> João Mamede написал(a):
>>  
>>
>>> hi I'm trying to set up a d-link dwl-g520 108Mbitps card in my freeBSD
>>> server I cvsup'ed and compiled(again) everything today however ath_hal
>>> doesn't suport super G for 11g however i was willing to try ndis,
>>> if_ndis compiles fine and loads fine however I don't have any ndis0 to
>>> work with ifconfig
>>> João Mamede
>>> _______________________________________________
>>> freebsd-current@freebsd.org mailing list
>>> http://lists.freebsd.org/mailman/listinfo/freebsd-current
>>> To unsubscribe, send any mail to 
>>> "freebsd-current-unsubscribe@freebsd.org"
>>>   
>>
>>
>> FreeBSD 6-CURRENT contains ndisgen utility witch allows you to simply 
>> convert Windows drivers inty .ko file. You will only need then to 
>> kldload <driver>_sys.ko file to have an ndis0 device if your ifconfig. 
>> No need to recompile kernel with ndis nor with ath or ath_hal.
>> _______________________________________________
>> freebsd-current@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-current
>> To unsubscribe, send any mail to 
>> "freebsd-current-unsubscribe@freebsd.org"
>>  
>>
> 
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
> 
> 




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?433A20EA.2020206>