Date: Sat, 12 Feb 2000 20:01:05 +0100 From: Jesper Skriver <jesper@skriver.dk> To: mobile@FreeBSD.org Subject: Support for Eicon Diva Pro ISDN pccard adapter Message-ID: <20000212200105.A36317@skriver.dk>
next in thread | raw e-mail | index | archive | help
Hi,
Does anyone have any idea of how to get such a thing to work (in
-current) ?
I assume it's just a serial port to the system, but the below says
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
I don't know is this means, that it's not a serial port, or ?
pccardc dumpcis:
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: 00 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x15 (Version 1 info), length = 37
000: 01 04 45 69 63 6f 6e 20 44 69 65 68 6c 00 44 69
010: 76 61 20 50 72 6f 00 30 35 2e 30 33 2e 39 36 00
020: 31 2d 31 00 ff
Version = 1.4, Manuf = [Eicon Diehl],card vers = [Diva Pro]
Addit. info = [05.03.96],[1-1]
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 21 01 32 20
PCMCIA ID = 0x121, OEM ID = 0x2032
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #5, code = 0x1a (Configuration map), length = 6
000: 01 01 c0 00 01 ff
Reg len = 2, config register addr = 0xc0, last config = 0x1
Registers: X-------
Tuple #6, code = 0x1b (Configuration entry), length = 12
000: c1 81 19 71 55 7d 7d 7d 44 30 ff ff
Config index = 0x1(default)
Interface byte = 0x81 (I/O) wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 9 x 10mA
Max current average over 10 ms: 9 x 10mA
Power down supply current: 9 x 10mA
Card decodes 4 address lines, limited 8/16 Bit I/O
IRQ modes: Pulse
IRQ level = 4
Tuple #7, code = 0x14 (No link), length = 0
Tuple #8, code = 0xff (Terminator), length = 0
/Jesper
--
Jesper Skriver, jesper(at)skriver(dot)dk - CCIE #5456
Work: Network manager @ AS3292 (Tele Danmark DataNetworks)
Private: Geek @ AS2109 (A much smaller network ;-)
One Unix to rule them all, One Resolver to find them,
One IP to bring them all and in the zone to bind them.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000212200105.A36317>