Date: Tue, 31 Aug 1999 07:33:18 +1000 From: "Young" <young@richardson.apana.org.au> To: "Christopher Michaels" <ChrisMic@clientlogic.com> Cc: <freebsd-questions@freebsd.org> Subject: Re: Unable to connect via ppp (was: Modem Issues) Message-ID: <009901bef32f$481e2460$857e03cb@jdy>
next in thread | raw e-mail | index | archive | help
>Well, glad you got it working. I've been w/o computer for 3 days now 'cause >I moved this weekend, so sorry for not replying sooner. No problem .... I appreciate the assistance. I've moved house once or thrice and know its typically a command performance. > >Alot of people have trouble with the lqr. Does it drop after 15 minutes of >in-activity or just 15 minutes no matter what? Ahhhhhhh ..... now there's something I wonder about. Have a look at the ppp.log attahed hereto and let me know your thoughts. FWIW, I had a ping running from just after connection til immediately before it dropped. There doesn't appear to be a definite connection between the ping and disconnection as far as I can see, other than the fact that they seem to have occurred at the same time .... now I'm not the greatest follower of all unix philosophy, but running a ping continuously to keep the connection alive seems a bit of a "messy" solution anyway. > >And yes you are correct about the gateway enable in /etc/rc.conf, and also >you do need to set the BSD machine as the default gateway on the windows >machines. OK ... as far as you can tell ... is that *all* I need to do to get the LAN connecting to the internet ?? ..... like do you think I need to mess with aliasing / NAT since I have fixed "real" IP addresses. I can't make anything out of Pedantic PPP Primer on that issue. > Aug 28 19:26:00 bryden ppp[413]: Phase: Using interface: tun0 Aug 28 19:26:00 bryden ppp[413]: Phase: deflink: Created in closed state Aug 28 19:26:00 bryden ppp[413]: Command: default: set device /dev/cuaa0 Aug 28 19:26:00 bryden ppp[413]: Command: default: set speed 115200 Aug 28 19:26:00 bryden ppp[413]: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 "" ATE1Q0 OK-AT-OK \dATDT\T TIMEOUT 40 CONNECT Aug 28 19:26:00 bryden ppp[413]: Command: Apana: set phone 32524971 #Separate multiple phone numbers with a | Aug 28 19:26:00 bryden ppp[413]: Command: Apana: set login TIMEOUT 10 gin:-BREAK-gin: dougy word: leaTher Aug 28 19:26:00 bryden ppp[413]: Command: Apana: set timeout 300 #Change to 0 if no timeout desired Aug 28 19:26:00 bryden ppp[413]: Command: Apana: deny lqr Aug 28 19:26:00 bryden ppp[413]: Command: Apana: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 Aug 28 19:26:00 bryden ppp[413]: Phase: PPP Started (interactive mode). Aug 28 19:26:21 bryden ppp[413]: Command: /dev/tty: dial Aug 28 19:26:21 bryden ppp[413]: Phase: bundle: Establish Aug 28 19:26:21 bryden ppp[413]: Phase: deflink: closed -> opening Aug 28 19:26:21 bryden ppp[413]: Phase: deflink: Connected! Aug 28 19:26:21 bryden ppp[413]: Phase: deflink: opening -> dial Aug 28 19:26:21 bryden ppp[413]: Phase: Phone: 32524971 Aug 28 19:26:21 bryden ppp[413]: Chat: deflink: Dial attempt 1 of 1 Aug 28 19:26:21 bryden ppp[413]: Chat: Send: ATE1Q0^M Aug 28 19:26:21 bryden ppp[413]: Chat: Expect(5): OK Aug 28 19:26:21 bryden ppp[413]: Chat: Received: ATE1Q0^M^M Aug 28 19:26:21 bryden ppp[413]: Chat: Received: OK^M Aug 28 19:26:21 bryden ppp[413]: Chat: Send: ATDT32524971^M Aug 28 19:26:23 bryden ppp[413]: Chat: Expect(40): CONNECT Aug 28 19:26:30 bryden ppp[413]: Chat: Received: ATDT32524971^M^M Aug 28 19:26:30 bryden ppp[413]: Chat: Received: BUSY^M Aug 28 19:26:30 bryden ppp[413]: Phase: deflink: dial -> hangup Aug 28 19:26:30 bryden ppp[413]: Phase: deflink: Disconnected! Aug 28 19:26:30 bryden ppp[413]: Phase: deflink: Connect time: 9 secs: 0 octets in, 0 octets out Aug 28 19:26:30 bryden ppp[413]: Phase: total 0 bytes/sec, peak 0 bytes/sec on Sat Aug 28 19:26:30 1999 Aug 28 19:26:30 bryden ppp[413]: Phase: deflink: hangup -> closed Aug 28 19:26:30 bryden ppp[413]: Phase: bundle: Dead Aug 28 19:26:39 bryden ppp[413]: Command: /dev/tty: dial Aug 28 19:26:39 bryden ppp[413]: Phase: bundle: Establish Aug 28 19:26:39 bryden ppp[413]: Phase: deflink: closed -> opening Aug 28 19:26:39 bryden ppp[413]: Phase: deflink: Connected! Aug 28 19:26:39 bryden ppp[413]: Phase: deflink: opening -> dial Aug 28 19:26:39 bryden ppp[413]: Phase: Phone: 32524971 Aug 28 19:26:39 bryden ppp[413]: Chat: deflink: Dial attempt 1 of 1 Aug 28 19:26:39 bryden ppp[413]: Chat: Send: ATE1Q0^M Aug 28 19:26:39 bryden ppp[413]: Chat: Expect(5): OK Aug 28 19:26:39 bryden ppp[413]: Chat: Received: ATE1Q0^M^M Aug 28 19:26:39 bryden ppp[413]: Chat: Received: OK^M Aug 28 19:26:39 bryden ppp[413]: Chat: Send: ATDT32524971^M Aug 28 19:26:41 bryden ppp[413]: Chat: Expect(40): CONNECT Aug 28 19:26:50 bryden ppp[413]: Chat: Received: ATDT32524971^M^M Aug 28 19:26:50 bryden ppp[413]: Chat: Received: BUSY^M Aug 28 19:26:50 bryden ppp[413]: Phase: deflink: dial -> hangup Aug 28 19:26:50 bryden ppp[413]: Phase: deflink: Disconnected! Aug 28 19:26:50 bryden ppp[413]: Phase: deflink: Connect time: 11 secs: 0 octets in, 0 octets out Aug 28 19:26:50 bryden ppp[413]: Phase: total 0 bytes/sec, peak 0 bytes/sec on Sat Aug 28 19:26:50 1999 Aug 28 19:26:50 bryden ppp[413]: Phase: deflink: hangup -> closed Aug 28 19:26:50 bryden ppp[413]: Phase: bundle: Dead Aug 28 19:26:55 bryden ppp[413]: Command: /dev/tty: dial Aug 28 19:26:55 bryden ppp[413]: Phase: bundle: Establish Aug 28 19:26:55 bryden ppp[413]: Phase: deflink: closed -> opening Aug 28 19:26:55 bryden ppp[413]: Phase: deflink: Connected! Aug 28 19:26:55 bryden ppp[413]: Phase: deflink: opening -> dial Aug 28 19:26:55 bryden ppp[413]: Phase: Phone: 32524971 Aug 28 19:26:55 bryden ppp[413]: Chat: deflink: Dial attempt 1 of 1 Aug 28 19:26:55 bryden ppp[413]: Chat: Send: ATE1Q0^M Aug 28 19:26:55 bryden ppp[413]: Chat: Expect(5): OK Aug 28 19:26:55 bryden ppp[413]: Chat: Received: ATE1Q0^M^M Aug 28 19:26:55 bryden ppp[413]: Chat: Received: OK^M Aug 28 19:26:55 bryden ppp[413]: Chat: Send: ATDT32524971^M Aug 28 19:26:57 bryden ppp[413]: Chat: Expect(40): CONNECT Aug 28 19:27:06 bryden ppp[413]: Chat: Received: ATDT32524971^M^M Aug 28 19:27:06 bryden ppp[413]: Chat: Received: BUSY^M Aug 28 19:27:06 bryden ppp[413]: Phase: deflink: dial -> hangup Aug 28 19:27:06 bryden ppp[413]: Phase: deflink: Disconnected! Aug 28 19:27:06 bryden ppp[413]: Phase: deflink: Connect time: 11 secs: 0 octets in, 0 octets out Aug 28 19:27:06 bryden ppp[413]: Phase: total 0 bytes/sec, peak 0 bytes/sec on Sat Aug 28 19:27:06 1999 Aug 28 19:27:06 bryden ppp[413]: Phase: deflink: hangup -> closed Aug 28 19:27:06 bryden ppp[413]: Phase: bundle: Dead Aug 28 19:27:30 bryden ppp[413]: Phase: Signal 1, terminate. Aug 28 19:27:30 bryden ppp[413]: Phase: PPP Terminated (normal). Aug 28 19:27:02 bryden ppp[218]: Phase: Using interface: tun0 Aug 28 19:27:02 bryden ppp[218]: Phase: deflink: Created in closed state Aug 28 19:27:02 bryden ppp[218]: Command: default: set device /dev/cuaa0 Aug 28 19:27:02 bryden ppp[218]: Command: default: set speed 115200 Aug 28 19:27:02 bryden ppp[218]: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 "" ATE1Q0 OK-AT-OK \dATDT\T TIMEOUT 40 CONNECT Aug 28 19:27:02 bryden ppp[218]: Command: Apana: set phone 32524971 #Separate multiple phone numbers with a | Aug 28 19:27:02 bryden ppp[218]: Command: Apana: set login TIMEOUT 10 gin:-BREAK-gin: dougy word: leaTher Aug 28 19:27:02 bryden ppp[218]: Command: Apana: set timeout 300 #Change to 0 if no timeout desired Aug 28 19:27:02 bryden ppp[218]: Command: Apana: deny lqr Aug 28 19:27:02 bryden ppp[218]: Command: Apana: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 Aug 28 19:27:02 bryden ppp[218]: Phase: PPP Started (interactive mode). Aug 28 19:36:25 bryden ppp[218]: Phase: Signal 1, terminate. Aug 28 19:36:25 bryden ppp[218]: Phase: Signal 1, terminate. Aug 28 19:36:25 bryden ppp[218]: Phase: PPP Terminated (normal). Aug 28 19:38:51 bryden ppp[218]: Phase: Using interface: tun0 Aug 28 19:38:52 bryden ppp[218]: Phase: deflink: Created in closed state Aug 28 19:38:52 bryden ppp[218]: Command: default: set device /dev/cuaa0 Aug 28 19:38:52 bryden ppp[218]: Command: default: set speed 38400 Aug 28 19:38:52 bryden ppp[218]: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 "" ATE1Q0 OK-AT-OK \dATDT\T TIMEOUT 40 CONNECT Aug 28 19:38:52 bryden ppp[218]: Command: Apana: set phone 32524971 #Separate multiple phone numbers with a | Aug 28 19:38:52 bryden ppp[218]: Command: Apana: set login TIMEOUT 10 gin:-BREAK-gin: dougy word: leaTher Aug 28 19:38:52 bryden ppp[218]: Command: Apana: set timeout 0 #Change to 0 if no timeout desired Aug 28 19:38:52 bryden ppp[218]: Command: Apana: deny lqr Aug 28 19:38:52 bryden ppp[218]: Command: Apana: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 Aug 28 19:38:52 bryden ppp[218]: Phase: PPP Started (interactive mode). Aug 28 19:42:45 bryden ppp[218]: Phase: Signal 1, terminate. Aug 28 19:42:45 bryden ppp[218]: Phase: Signal 1, terminate. Aug 28 19:42:45 bryden ppp[218]: Phase: PPP Terminated (normal). Aug 30 04:35:11 bryden ppp[222]: Phase: Using interface: tun0 Aug 30 04:35:11 bryden ppp[222]: Phase: deflink: Created in closed state Aug 30 04:35:11 bryden ppp[222]: Command: default: set device /dev/cuaa0 Aug 30 04:35:11 bryden ppp[222]: Command: default: set speed 38400 Aug 30 04:35:11 bryden ppp[222]: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER "" ATE1Q0 OK-AT-OK \dATDT\T TIMEOUT 40 CONNECT Aug 30 04:35:11 bryden ppp[222]: Phase: PPP Started (interactive mode). Aug 30 04:35:16 bryden ppp[222]: Command: /dev/tty: term Aug 30 04:35:16 bryden ppp[222]: Phase: bundle: Establish Aug 30 04:35:16 bryden ppp[222]: Phase: deflink: closed -> opening Aug 30 04:35:16 bryden ppp[222]: Phase: deflink: Connected! Aug 30 04:35:16 bryden ppp[222]: Phase: deflink: opening -> ready Aug 30 04:36:03 bryden ppp[222]: Phase: Signal 1, terminate. Aug 30 04:36:03 bryden ppp[222]: Phase: deflink: Disconnected! Aug 30 05:36:46 bryden ppp[261]: Phase: Using interface: tun0 Aug 30 05:36:46 bryden ppp[261]: Phase: deflink: Created in closed state Aug 30 05:36:46 bryden ppp[261]: Command: default: set device /dev/cuaa0 Aug 30 05:36:46 bryden ppp[261]: Command: default: set speed 38400 Aug 30 05:36:46 bryden ppp[261]: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER "" ATE1Q0 OK-AT-OK \dATDT\T TIMEOUT 40 CONNECT Aug 30 05:36:46 bryden ppp[261]: Phase: PPP Started (interactive mode). Aug 30 05:36:53 bryden ppp[261]: Command: /dev/tty: term Aug 30 05:36:53 bryden ppp[261]: Phase: bundle: Establish Aug 30 05:36:53 bryden ppp[261]: Phase: deflink: closed -> opening Aug 30 05:36:53 bryden ppp[261]: Phase: deflink: Connected! Aug 30 05:36:53 bryden ppp[261]: Phase: deflink: opening -> ready Aug 30 05:37:46 bryden ppp[261]: Phase: deflink: PPP packet detected, coming up Aug 30 05:37:46 bryden ppp[261]: Phase: deflink: ready -> lcp Aug 30 05:37:46 bryden ppp[261]: LCP: FSM: Using "deflink" as a transport Aug 30 05:37:46 bryden ppp[261]: LCP: deflink: State change Initial --> Closed Aug 30 05:37:46 bryden ppp[261]: LCP: deflink: LayerStart Aug 30 05:37:46 bryden ppp[261]: LCP: deflink: SendConfigReq(1) state = Closed Aug 30 05:37:46 bryden ppp[261]: LCP: ACFCOMP[2] Aug 30 05:37:46 bryden ppp[261]: LCP: PROTOCOMP[2] Aug 30 05:37:46 bryden ppp[261]: LCP: ACCMAP[6] 0x00000000 Aug 30 05:37:46 bryden ppp[261]: LCP: MRU[4] 1500 Aug 30 05:37:46 bryden ppp[261]: LCP: MAGICNUM[6] 0x6e9839ec Aug 30 05:37:46 bryden ppp[261]: LCP: deflink: State change Closed --> Req-Sent Aug 30 05:37:46 bryden ppp[261]: LCP: deflink: RecvConfigReq(1) state = Req-Sent Aug 30 05:37:46 bryden ppp[261]: LCP: MAGICNUM[6] 0x8efc905b Aug 30 05:37:46 bryden ppp[261]: LCP: PROTOCOMP[2] Aug 30 05:37:46 bryden ppp[261]: LCP: ACFCOMP[2] Aug 30 05:37:46 bryden ppp[261]: LCP: deflink: SendConfigAck(1) state = Req-Sent Aug 30 05:37:46 bryden ppp[261]: LCP: MAGICNUM[6] 0x8efc905b Aug 30 05:37:46 bryden ppp[261]: LCP: PROTOCOMP[2] Aug 30 05:37:46 bryden ppp[261]: LCP: ACFCOMP[2] Aug 30 05:37:46 bryden ppp[261]: LCP: deflink: State change Req-Sent --> Ack-Sent Aug 30 05:37:46 bryden ppp[261]: LCP: deflink: RecvConfigAck(1) state = Ack-Sent Aug 30 05:37:46 bryden ppp[261]: LCP: deflink: State change Ack-Sent --> Opened Aug 30 05:37:46 bryden ppp[261]: LCP: deflink: LayerUp Aug 30 05:37:46 bryden ppp[261]: CCP: FSM: Using "deflink" as a transport Aug 30 05:37:46 bryden ppp[261]: CCP: deflink: State change Initial --> Closed Aug 30 05:37:46 bryden ppp[261]: CCP: deflink: LayerStart. Aug 30 05:37:46 bryden ppp[261]: CCP: deflink: SendConfigReq(1) state = Closed Aug 30 05:37:46 bryden ppp[261]: CCP: DEFLATE[4] win 15 Aug 30 05:37:46 bryden ppp[261]: CCP: PRED1[2] Aug 30 05:37:46 bryden ppp[261]: CCP: deflink: State change Closed --> Req-Sent Aug 30 05:37:46 bryden ppp[261]: Phase: deflink: lcp -> open Aug 30 05:37:46 bryden ppp[261]: Phase: bundle: Network Aug 30 05:37:46 bryden ppp[261]: IPCP: FSM: Using "deflink" as a transport Aug 30 05:37:46 bryden ppp[261]: IPCP: deflink: State change Initial --> Closed Aug 30 05:37:46 bryden ppp[261]: IPCP: deflink: LayerStart. Aug 30 05:37:46 bryden ppp[261]: IPCP: deflink: SendConfigReq(1) state = Closed Aug 30 05:37:46 bryden ppp[261]: IPCP: IPADDR[6] 10.0.0.1 Aug 30 05:37:46 bryden ppp[261]: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Aug 30 05:37:46 bryden ppp[261]: IPCP: deflink: State change Closed --> Req-Sent Aug 30 05:37:46 bryden ppp[261]: IPCP: deflink: RecvConfigReq(1) state = Req-Sent Aug 30 05:37:46 bryden ppp[261]: IPCP: IPADDR[6] 203.3.126.1 Aug 30 05:37:46 bryden ppp[261]: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Aug 30 05:37:46 bryden ppp[261]: IPCP: deflink: SendConfigAck(1) state = Req-Sent Aug 30 05:37:46 bryden ppp[261]: IPCP: IPADDR[6] 203.3.126.1 Aug 30 05:37:46 bryden ppp[261]: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Aug 30 05:37:46 bryden ppp[261]: IPCP: deflink: State change Req-Sent --> Ack-Sent Aug 30 05:37:46 bryden ppp[261]: CCP: deflink: RecvConfigReq(1) state = Req-Sent Aug 30 05:37:46 bryden ppp[261]: CCP: [EMPTY] Aug 30 05:37:46 bryden ppp[261]: CCP: deflink: SendConfigAck(1) state = Req-Sent Aug 30 05:37:46 bryden ppp[261]: CCP: [EMPTY] Aug 30 05:37:46 bryden ppp[261]: CCP: deflink: State change Req-Sent --> Ack-Sent Aug 30 05:37:46 bryden ppp[261]: CCP: deflink: RecvConfigRej(1) state = Ack-Sent Aug 30 05:37:46 bryden ppp[261]: CCP: DEFLATE[4] win 15 Aug 30 05:37:46 bryden ppp[261]: CCP: deflink: SendConfigReq(2) state = Ack-Sent Aug 30 05:37:46 bryden ppp[261]: CCP: PRED1[2] Aug 30 05:37:46 bryden ppp[261]: IPCP: deflink: RecvConfigNak(1) state = Ack-Sent Aug 30 05:37:46 bryden ppp[261]: IPCP: IPADDR[6] 203.3.126.129 Aug 30 05:37:46 bryden ppp[261]: IPCP: IPADDR[6] changing address: 10.0.0.1 --> 203.3.126.129 Aug 30 05:37:46 bryden ppp[261]: IPCP: deflink: SendConfigReq(2) state = Ack-Sent Aug 30 05:37:46 bryden ppp[261]: IPCP: IPADDR[6] 203.3.126.129 Aug 30 05:37:46 bryden ppp[261]: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Aug 30 05:37:46 bryden ppp[261]: CCP: deflink: RecvConfigRej(2) state = Ack-Sent Aug 30 05:37:46 bryden ppp[261]: CCP: PRED1[2] Aug 30 05:37:46 bryden ppp[261]: CCP: deflink: SendConfigReq(3) state = Ack-Sent Aug 30 05:37:46 bryden ppp[261]: CCP: [EMPTY] Aug 30 05:37:46 bryden ppp[261]: IPCP: deflink: RecvConfigAck(2) state = Ack-Sent Aug 30 05:37:46 bryden ppp[261]: IPCP: deflink: State change Ack-Sent --> Opened Aug 30 05:37:46 bryden ppp[261]: IPCP: deflink: LayerUp. Aug 30 05:37:46 bryden ppp[261]: IPCP: myaddr 203.3.126.129 hisaddr = 203.3.126.1 Aug 30 05:37:46 bryden ppp[261]: Command: MYADDR: delete ALL Aug 30 05:37:46 bryden ppp[261]: Command: MYADDR: add 0 0 HISADDR Aug 30 05:37:47 bryden ppp[261]: CCP: deflink: RecvConfigAck(3) state = Ack-Sent Aug 30 05:37:47 bryden ppp[261]: CCP: deflink: State change Ack-Sent --> Opened Aug 30 05:37:47 bryden ppp[261]: CCP: deflink: LayerUp. Aug 30 05:37:47 bryden ppp[261]: CCP: deflink: Out = none[-1], In = none[-1] Aug 30 05:54:35 bryden ppp[261]: Phase: Idle timer expired. Aug 30 05:54:35 bryden ppp[261]: IPCP: deflink: LayerDown: 203.3.126.129 Aug 30 05:54:35 bryden ppp[261]: IPCP: deflink: SendTerminateReq(3) state = Opened Aug 30 05:54:35 bryden ppp[261]: IPCP: deflink: State change Opened --> Closing Aug 30 05:54:35 bryden ppp[261]: IPCP: deflink: RecvTerminateAck(3) state = Closing Aug 30 05:54:35 bryden ppp[261]: IPCP: deflink: LayerFinish. Aug 30 05:54:35 bryden ppp[261]: IPCP: Connect time: 1009 secs: 38601 octets in, 20948 octets out Aug 30 05:54:35 bryden ppp[261]: IPCP: total 59 bytes/sec, peak 1401 bytes/sec on Mon Aug 30 05:54:35 1999 Aug 30 05:54:35 bryden ppp[261]: IPCP: deflink: State change Closing --> Closed Aug 30 05:54:35 bryden ppp[261]: Phase: bundle: Terminate Aug 30 05:54:35 bryden ppp[261]: CCP: deflink: LayerDown. Aug 30 05:54:35 bryden ppp[261]: CCP: deflink: State change Opened --> Starting Aug 30 05:54:35 bryden ppp[261]: CCP: deflink: LayerFinish. Aug 30 05:54:35 bryden ppp[261]: CCP: deflink: State change Starting --> Initial Aug 30 05:54:35 bryden ppp[261]: LCP: deflink: LayerDown Aug 30 05:54:35 bryden ppp[261]: LCP: deflink: SendTerminateReq(2) state = Opened Aug 30 05:54:35 bryden ppp[261]: LCP: deflink: State change Opened --> Closing Aug 30 05:54:35 bryden ppp[261]: Phase: deflink: open -> lcp Aug 30 05:54:35 bryden ppp[261]: IPCP: deflink: State change Closed --> Initial Aug 30 05:54:35 bryden ppp[261]: LCP: deflink: RecvTerminateAck(2) state = Closing Aug 30 05:54:35 bryden ppp[261]: LCP: deflink: LayerFinish Aug 30 05:54:35 bryden ppp[261]: LCP: deflink: State change Closing --> Closed Aug 30 05:54:35 bryden ppp[261]: LCP: deflink: State change Closed --> Initial Aug 30 05:54:35 bryden ppp[261]: Phase: deflink: Disconnected! Aug 30 05:54:35 bryden ppp[261]: Phase: deflink: Connect time: 1062 secs: 39241 octets in, 31170 octets out Aug 30 05:54:35 bryden ppp[261]: Phase: total 66 bytes/sec, peak 1354 bytes/sec on Mon Aug 30 05:54:35 1999 Aug 30 05:54:35 bryden ppp[261]: Phase: deflink: lcp -> closed Aug 30 05:54:35 bryden ppp[261]: Phase: bundle: Dead Aug 30 05:54:50 bryden ppp[261]: Command: /dev/tty: dial Apana Aug 30 05:54:50 bryden ppp[261]: Command: Apana: set phone 32524971 #Separate multiple phone numbers with a | Aug 30 05:54:50 bryden ppp[261]: Command: Apana: set login TIMEOUT 10 gin:-BREAK-gin: dougy word: leaTher Aug 30 05:54:50 bryden ppp[261]: Command: Apana: set timeout 0 #Change to 0 if no timeout desired Aug 30 05:54:50 bryden ppp[261]: Command: Apana: deny lqr Aug 30 05:54:50 bryden ppp[261]: Command: Apana: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 Aug 30 05:54:50 bryden ppp[261]: Phase: bundle: Establish Aug 30 05:54:50 bryden ppp[261]: Phase: deflink: closed -> opening Aug 30 05:54:50 bryden ppp[261]: Phase: deflink: Connected! Aug 30 05:54:50 bryden ppp[261]: Phase: deflink: opening -> dial Aug 30 05:54:50 bryden ppp[261]: Phase: Phone: 32524971 Aug 30 05:54:50 bryden ppp[261]: Chat: deflink: Dial attempt 1 of 1 Aug 30 05:54:50 bryden ppp[261]: Chat: Send: ATE1Q0^M Aug 30 05:54:50 bryden ppp[261]: Chat: Expect(30): OK Aug 30 05:54:50 bryden ppp[261]: Chat: Received: ATE1Q0^M^M Aug 30 05:54:50 bryden ppp[261]: Chat: Received: OK^M Aug 30 05:54:50 bryden ppp[261]: Chat: Send: ATDT32524971^M Aug 30 05:54:52 bryden ppp[261]: Chat: Expect(40): CONNECT Aug 30 05:55:24 bryden ppp[261]: Chat: Received: ATDT32524971^M^M Aug 30 05:55:24 bryden ppp[261]: Chat: Received: CONNECT Aug 30 05:55:24 bryden ppp[261]: Phase: deflink: dial -> login Aug 30 05:55:24 bryden ppp[261]: Chat: Expect(10): gin: Aug 30 05:55:24 bryden ppp[261]: Chat: Received: 38400^M Aug 30 05:55:24 bryden ppp[261]: Chat: Received: ^M^M Aug 30 05:55:24 bryden ppp[261]: Chat: Received: FreeBSD (gargoyle.apana.org.au) (ttyc0c)^M^M Aug 30 05:55:24 bryden ppp[261]: Chat: Received: ^M^M Aug 30 05:55:24 bryden ppp[261]: Chat: Received: login: Aug 30 05:55:24 bryden ppp[261]: Chat: Send: dougy^M Aug 30 05:55:24 bryden ppp[261]: Chat: Expect(10): word: Aug 30 05:55:24 bryden ppp[261]: Chat: Received: dougy^M Aug 30 05:55:24 bryden ppp[261]: Chat: Received: Password: Aug 30 05:55:24 bryden ppp[261]: Chat: Send: leaTher^M Aug 30 05:55:24 bryden ppp[261]: Phase: deflink: login -> lcp Aug 30 05:55:24 bryden ppp[261]: LCP: FSM: Using "deflink" as a transport Aug 30 05:55:24 bryden ppp[261]: LCP: deflink: State change Initial --> Closed Aug 30 05:55:24 bryden ppp[261]: LCP: deflink: State change Closed --> Stopped Aug 30 05:55:24 bryden ppp[261]: LCP: deflink: RecvConfigReq(1) state = Stopped Aug 30 05:55:24 bryden ppp[261]: LCP: MAGICNUM[6] 0xa4822e67 Aug 30 05:55:24 bryden ppp[261]: LCP: PROTOCOMP[2] Aug 30 05:55:24 bryden ppp[261]: LCP: ACFCOMP[2] Aug 30 05:55:24 bryden ppp[261]: LCP: deflink: SendConfigReq(3) state = Stopped Aug 30 05:55:24 bryden ppp[261]: LCP: ACFCOMP[2] Aug 30 05:55:24 bryden ppp[261]: LCP: PROTOCOMP[2] Aug 30 05:55:24 bryden ppp[261]: LCP: ACCMAP[6] 0x00000000 Aug 30 05:55:24 bryden ppp[261]: LCP: MRU[4] 1500 Aug 30 05:55:24 bryden ppp[261]: LCP: MAGICNUM[6] 0x3813561f Aug 30 05:55:24 bryden ppp[261]: LCP: deflink: SendConfigAck(1) state = Stopped Aug 30 05:55:24 bryden ppp[261]: LCP: MAGICNUM[6] 0xa4822e67 Aug 30 05:55:24 bryden ppp[261]: LCP: PROTOCOMP[2] Aug 30 05:55:24 bryden ppp[261]: LCP: ACFCOMP[2] Aug 30 05:55:24 bryden ppp[261]: LCP: deflink: LayerStart Aug 30 05:55:24 bryden ppp[261]: LCP: deflink: State change Stopped --> Ack-Sent Aug 30 05:55:24 bryden ppp[261]: LCP: deflink: RecvConfigAck(3) state = Ack-Sent Aug 30 05:55:24 bryden ppp[261]: LCP: deflink: State change Ack-Sent --> Opened Aug 30 05:55:24 bryden ppp[261]: LCP: deflink: LayerUp Aug 30 05:55:24 bryden ppp[261]: CCP: FSM: Using "deflink" as a transport Aug 30 05:55:24 bryden ppp[261]: CCP: deflink: State change Initial --> Closed Aug 30 05:55:24 bryden ppp[261]: CCP: deflink: LayerStart. Aug 30 05:55:24 bryden ppp[261]: CCP: deflink: SendConfigReq(4) state = Closed Aug 30 05:55:24 bryden ppp[261]: CCP: DEFLATE[4] win 15 Aug 30 05:55:24 bryden ppp[261]: CCP: PRED1[2] Aug 30 05:55:24 bryden ppp[261]: CCP: deflink: State change Closed --> Req-Sent Aug 30 05:55:24 bryden ppp[261]: Phase: deflink: lcp -> open Aug 30 05:55:24 bryden ppp[261]: Phase: bundle: Network Aug 30 05:55:24 bryden ppp[261]: IPCP: FSM: Using "deflink" as a transport Aug 30 05:55:24 bryden ppp[261]: IPCP: deflink: State change Initial --> Closed Aug 30 05:55:24 bryden ppp[261]: IPCP: deflink: LayerStart. Aug 30 05:55:24 bryden ppp[261]: IPCP: deflink: SendConfigReq(4) state = Closed Aug 30 05:55:24 bryden ppp[261]: IPCP: IPADDR[6] 203.3.126.129 Aug 30 05:55:24 bryden ppp[261]: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Aug 30 05:55:24 bryden ppp[261]: IPCP: deflink: State change Closed --> Req-Sent Aug 30 05:55:24 bryden ppp[261]: IPCP: deflink: RecvConfigReq(1) state = Req-Sent Aug 30 05:55:24 bryden ppp[261]: IPCP: IPADDR[6] 203.3.126.1 Aug 30 05:55:24 bryden ppp[261]: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Aug 30 05:55:24 bryden ppp[261]: IPCP: deflink: SendConfigAck(1) state = Req-Sent Aug 30 05:55:24 bryden ppp[261]: IPCP: IPADDR[6] 203.3.126.1 Aug 30 05:55:24 bryden ppp[261]: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Aug 30 05:55:24 bryden ppp[261]: IPCP: deflink: State change Req-Sent --> Ack-Sent Aug 30 05:55:25 bryden ppp[261]: CCP: deflink: RecvConfigReq(1) state = Req-Sent Aug 30 05:55:25 bryden ppp[261]: CCP: [EMPTY] Aug 30 05:55:25 bryden ppp[261]: CCP: deflink: SendConfigAck(1) state = Req-Sent Aug 30 05:55:25 bryden ppp[261]: CCP: [EMPTY] Aug 30 05:55:25 bryden ppp[261]: CCP: deflink: State change Req-Sent --> Ack-Sent Aug 30 05:55:25 bryden ppp[261]: CCP: deflink: RecvConfigRej(4) state = Ack-Sent Aug 30 05:55:25 bryden ppp[261]: CCP: DEFLATE[4] win 15 Aug 30 05:55:25 bryden ppp[261]: CCP: deflink: SendConfigReq(5) state = Ack-Sent Aug 30 05:55:25 bryden ppp[261]: CCP: PRED1[2] Aug 30 05:55:25 bryden ppp[261]: IPCP: deflink: RecvConfigAck(4) state = Ack-Sent Aug 30 05:55:25 bryden ppp[261]: IPCP: deflink: State change Ack-Sent --> Opened Aug 30 05:55:25 bryden ppp[261]: IPCP: deflink: LayerUp. Aug 30 05:55:25 bryden ppp[261]: IPCP: myaddr 203.3.126.129 hisaddr = 203.3.126.1 Aug 30 05:55:25 bryden ppp[261]: Command: MYADDR: delete ALL Aug 30 05:55:25 bryden ppp[261]: Command: MYADDR: add 0 0 HISADDR Aug 30 05:55:25 bryden ppp[261]: CCP: deflink: RecvConfigRej(5) state = Ack-Sent Aug 30 05:55:25 bryden ppp[261]: CCP: PRED1[2] Aug 30 05:55:25 bryden ppp[261]: CCP: deflink: SendConfigReq(6) state = Ack-Sent Aug 30 05:55:25 bryden ppp[261]: CCP: [EMPTY] Aug 30 05:55:25 bryden ppp[261]: CCP: deflink: RecvConfigAck(6) state = Ack-Sent Aug 30 05:55:25 bryden ppp[261]: CCP: deflink: State change Ack-Sent --> Opened Aug 30 05:55:25 bryden ppp[261]: CCP: deflink: LayerUp. Aug 30 05:55:25 bryden ppp[261]: CCP: deflink: Out = none[-1], In = none[-1] Aug 30 05:58:12 bryden ppp[261]: Command: /dev/tty: bg Aug 30 06:13:38 bryden ppp[261]: Phase: Idle timer expired. Aug 30 06:13:38 bryden ppp[261]: IPCP: deflink: LayerDown: 203.3.126.129 Aug 30 06:13:38 bryden ppp[261]: IPCP: deflink: SendTerminateReq(5) state = Opened Aug 30 06:13:38 bryden ppp[261]: IPCP: deflink: State change Opened --> Closing Aug 30 06:13:38 bryden ppp[261]: IPCP: deflink: RecvTerminateAck(5) state = Closing Aug 30 06:13:38 bryden ppp[261]: IPCP: deflink: LayerFinish. Aug 30 06:13:38 bryden ppp[261]: IPCP: Connect time: 1094 secs: 58562 octets in, 22749 octets out Aug 30 06:13:38 bryden ppp[261]: IPCP: total 74 bytes/sec, peak 2843 bytes/sec on Mon Aug 30 06:13:38 1999 Aug 30 06:13:38 bryden ppp[261]: IPCP: deflink: State change Closing --> Closed Aug 30 06:13:38 bryden ppp[261]: Phase: bundle: Terminate Aug 30 06:13:38 bryden ppp[261]: CCP: deflink: LayerDown. Aug 30 06:13:38 bryden ppp[261]: CCP: deflink: State change Opened --> Starting Aug 30 06:13:38 bryden ppp[261]: CCP: deflink: LayerFinish. Aug 30 06:13:38 bryden ppp[261]: CCP: deflink: State change Starting --> Initial Aug 30 06:13:38 bryden ppp[261]: LCP: deflink: LayerDown Aug 30 06:13:38 bryden ppp[261]: LCP: deflink: SendTerminateReq(4) state = Opened Aug 30 06:13:38 bryden ppp[261]: LCP: deflink: State change Opened --> Closing Aug 30 06:13:38 bryden ppp[261]: Phase: deflink: open -> lcp Aug 30 06:13:38 bryden ppp[261]: IPCP: deflink: State change Closed --> Initial Aug 30 06:13:38 bryden ppp[261]: LCP: deflink: RecvTerminateAck(4) state = Closing Aug 30 06:13:38 bryden ppp[261]: LCP: deflink: LayerFinish Aug 30 06:13:38 bryden ppp[261]: LCP: deflink: State change Closing --> Closed Aug 30 06:13:38 bryden ppp[261]: LCP: deflink: State change Closed --> Initial Aug 30 06:13:38 bryden ppp[261]: Phase: deflink: Disconnected! Aug 30 06:13:38 bryden ppp[261]: Phase: deflink: lcp -> hangup Aug 30 06:13:38 bryden ppp[261]: Phase: deflink: Connect time: 1128 secs: 60446 octets in, 33620 octets out Aug 30 06:13:38 bryden ppp[261]: Phase: total 83 bytes/sec, peak 2672 bytes/sec on Mon Aug 30 06:13:38 1999 Aug 30 06:13:38 bryden ppp[261]: Phase: deflink: hangup -> closed Aug 30 06:13:38 bryden ppp[261]: Phase: bundle: Dead Aug 30 09:56:14 bryden ppp[261]: Phase: Signal 1, terminate. Aug 30 09:56:14 bryden ppp[261]: Phase: Signal 1, terminate. Aug 30 09:56:14 bryden ppp[261]: Phase: PPP Terminated (normal). Aug 30 18:49:34 bryden ppp[215]: Phase: Using interface: tun0 Aug 30 18:49:34 bryden ppp[215]: Phase: deflink: Created in closed state Aug 30 18:49:34 bryden ppp[215]: Command: default: set device /dev/cuaa0 Aug 30 18:49:34 bryden ppp[215]: Command: default: set speed 38400 Aug 30 18:49:34 bryden ppp[215]: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER "" ATE1Q0 OK-AT-OK \dATDT\T TIMEOUT 40 CONNECT Aug 30 18:49:34 bryden ppp[215]: Command: Apana: set phone 32524971 #Separate multiple phone numbers with a | Aug 30 18:49:34 bryden ppp[215]: Command: Apana: set login TIMEOUT 10 gin:-BREAK-gin: dougy word: leaTher Aug 30 18:49:34 bryden ppp[215]: Command: Apana: set timeout 0 #Change to 0 if no timeout desired Aug 30 18:49:34 bryden ppp[215]: Command: Apana: disable lqr Aug 30 18:49:34 bryden ppp[215]: Command: Apana: deny lqr Aug 30 18:49:34 bryden ppp[215]: Command: Apana: disable pred1 Aug 30 18:49:34 bryden ppp[215]: Command: Apana: deny pred1 Aug 30 18:49:34 bryden ppp[215]: Command: Apana: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 Aug 30 18:49:34 bryden ppp[215]: Phase: PPP Started (interactive mode). Aug 30 18:49:53 bryden ppp[215]: Command: /dev/tty: dial Aug 30 18:49:53 bryden ppp[215]: Phase: bundle: Establish Aug 30 18:49:53 bryden ppp[215]: Phase: deflink: closed -> opening Aug 30 18:49:53 bryden ppp[215]: Phase: deflink: Connected! Aug 30 18:49:53 bryden ppp[215]: Phase: deflink: opening -> dial Aug 30 18:49:53 bryden ppp[215]: Phase: Phone: 32524971 Aug 30 18:49:53 bryden ppp[215]: Chat: deflink: Dial attempt 1 of 1 Aug 30 18:49:53 bryden ppp[215]: Chat: Send: ATE1Q0^M Aug 30 18:49:53 bryden ppp[215]: Chat: Expect(30): OK Aug 30 18:49:53 bryden ppp[215]: Chat: Received: ATE1Q0^M^M Aug 30 18:49:53 bryden ppp[215]: Chat: Received: OK^M Aug 30 18:49:53 bryden ppp[215]: Chat: Send: ATDT32524971^M Aug 30 18:49:55 bryden ppp[215]: Chat: Expect(40): CONNECT Aug 30 18:50:25 bryden ppp[215]: Chat: Received: ATDT32524971^M^M Aug 30 18:50:25 bryden ppp[215]: Chat: Received: CONNECT 38400^M Aug 30 18:50:25 bryden ppp[215]: Phase: deflink: dial -> login Aug 30 18:50:25 bryden ppp[215]: Chat: Expect(10): gin: Aug 30 18:50:25 bryden ppp[215]: Chat: Received: ^M^M Aug 30 18:50:25 bryden ppp[215]: Chat: Received: FreeBSD (gargoyle.apana.org.au) (ttyc0c)^M^M Aug 30 18:50:25 bryden ppp[215]: Chat: Received: ^M^M Aug 30 18:50:25 bryden ppp[215]: Chat: Received: login: Aug 30 18:50:25 bryden ppp[215]: Chat: Send: dougy^M Aug 30 18:50:25 bryden ppp[215]: Chat: Expect(10): word: Aug 30 18:50:25 bryden ppp[215]: Chat: Received: dougy^M Aug 30 18:50:25 bryden ppp[215]: Chat: Received: Password: Aug 30 18:50:25 bryden ppp[215]: Chat: Send: leaTher^M Aug 30 18:50:25 bryden ppp[215]: Phase: deflink: login -> lcp Aug 30 18:50:25 bryden ppp[215]: LCP: FSM: Using "deflink" as a transport Aug 30 18:50:25 bryden ppp[215]: LCP: deflink: State change Initial --> Closed Aug 30 18:50:25 bryden ppp[215]: LCP: deflink: State change Closed --> Stopped Aug 30 18:50:26 bryden ppp[215]: LCP: deflink: RecvConfigReq(1) state = Stopped Aug 30 18:50:26 bryden ppp[215]: LCP: MAGICNUM[6] 0x4db70f21 Aug 30 18:50:26 bryden ppp[215]: LCP: PROTOCOMP[2] Aug 30 18:50:26 bryden ppp[215]: LCP: ACFCOMP[2] Aug 30 18:50:26 bryden ppp[215]: LCP: deflink: SendConfigReq(1) state = Stopped Aug 30 18:50:26 bryden ppp[215]: LCP: ACFCOMP[2] Aug 30 18:50:26 bryden ppp[215]: LCP: PROTOCOMP[2] Aug 30 18:50:26 bryden ppp[215]: LCP: ACCMAP[6] 0x00000000 Aug 30 18:50:26 bryden ppp[215]: LCP: MRU[4] 1500 Aug 30 18:50:26 bryden ppp[215]: LCP: MAGICNUM[6] 0x07653d57 Aug 30 18:50:26 bryden ppp[215]: LCP: deflink: SendConfigAck(1) state = Stopped Aug 30 18:50:26 bryden ppp[215]: LCP: MAGICNUM[6] 0x4db70f21 Aug 30 18:50:26 bryden ppp[215]: LCP: PROTOCOMP[2] Aug 30 18:50:26 bryden ppp[215]: LCP: ACFCOMP[2] Aug 30 18:50:26 bryden ppp[215]: LCP: deflink: LayerStart Aug 30 18:50:26 bryden ppp[215]: LCP: deflink: State change Stopped --> Ack-Sent Aug 30 18:50:26 bryden ppp[215]: LCP: deflink: RecvConfigAck(1) state = Ack-Sent Aug 30 18:50:26 bryden ppp[215]: LCP: deflink: State change Ack-Sent --> Opened Aug 30 18:50:26 bryden ppp[215]: LCP: deflink: LayerUp Aug 30 18:50:26 bryden ppp[215]: CCP: FSM: Using "deflink" as a transport Aug 30 18:50:26 bryden ppp[215]: CCP: deflink: State change Initial --> Closed Aug 30 18:50:26 bryden ppp[215]: CCP: deflink: LayerStart. Aug 30 18:50:26 bryden ppp[215]: CCP: deflink: SendConfigReq(1) state = Closed Aug 30 18:50:26 bryden ppp[215]: CCP: DEFLATE[4] win 15 Aug 30 18:50:26 bryden ppp[215]: CCP: deflink: State change Closed --> Req-Sent Aug 30 18:50:26 bryden ppp[215]: Phase: deflink: lcp -> open Aug 30 18:50:26 bryden ppp[215]: Phase: bundle: Network Aug 30 18:50:26 bryden ppp[215]: IPCP: FSM: Using "deflink" as a transport Aug 30 18:50:26 bryden ppp[215]: IPCP: deflink: State change Initial --> Closed Aug 30 18:50:26 bryden ppp[215]: IPCP: deflink: LayerStart. Aug 30 18:50:26 bryden ppp[215]: IPCP: deflink: SendConfigReq(1) state = Closed Aug 30 18:50:26 bryden ppp[215]: IPCP: IPADDR[6] 10.0.0.1 Aug 30 18:50:26 bryden ppp[215]: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Aug 30 18:50:26 bryden ppp[215]: IPCP: deflink: State change Closed --> Req-Sent Aug 30 18:50:26 bryden ppp[215]: IPCP: deflink: RecvConfigReq(1) state = Req-Sent Aug 30 18:50:26 bryden ppp[215]: IPCP: IPADDR[6] 203.3.126.1 Aug 30 18:50:26 bryden ppp[215]: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Aug 30 18:50:26 bryden ppp[215]: IPCP: deflink: SendConfigAck(1) state = Req-Sent Aug 30 18:50:26 bryden ppp[215]: IPCP: IPADDR[6] 203.3.126.1 Aug 30 18:50:26 bryden ppp[215]: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Aug 30 18:50:26 bryden ppp[215]: IPCP: deflink: State change Req-Sent --> Ack-Sent Aug 30 18:50:26 bryden ppp[215]: CCP: deflink: RecvConfigReq(1) state = Req-Sent Aug 30 18:50:26 bryden ppp[215]: CCP: [EMPTY] Aug 30 18:50:26 bryden ppp[215]: CCP: deflink: SendConfigAck(1) state = Req-Sent Aug 30 18:50:26 bryden ppp[215]: CCP: [EMPTY] Aug 30 18:50:26 bryden ppp[215]: CCP: deflink: State change Req-Sent --> Ack-Sent Aug 30 18:50:26 bryden ppp[215]: CCP: deflink: RecvConfigRej(1) state = Ack-Sent Aug 30 18:50:26 bryden ppp[215]: CCP: DEFLATE[4] win 15 Aug 30 18:50:26 bryden ppp[215]: CCP: deflink: SendConfigReq(2) state = Ack-Sent Aug 30 18:50:26 bryden ppp[215]: CCP: [EMPTY] Aug 30 18:50:26 bryden ppp[215]: IPCP: deflink: RecvConfigNak(1) state = Ack-Sent Aug 30 18:50:26 bryden ppp[215]: IPCP: IPADDR[6] 203.3.126.129 Aug 30 18:50:26 bryden ppp[215]: IPCP: IPADDR[6] changing address: 10.0.0.1 --> 203.3.126.129 Aug 30 18:50:26 bryden ppp[215]: IPCP: deflink: SendConfigReq(2) state = Ack-Sent Aug 30 18:50:26 bryden ppp[215]: IPCP: IPADDR[6] 203.3.126.129 Aug 30 18:50:26 bryden ppp[215]: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Aug 30 18:50:26 bryden ppp[215]: CCP: deflink: RecvConfigAck(2) state = Ack-Sent Aug 30 18:50:26 bryden ppp[215]: CCP: deflink: State change Ack-Sent --> Opened Aug 30 18:50:26 bryden ppp[215]: CCP: deflink: LayerUp. Aug 30 18:50:26 bryden ppp[215]: CCP: deflink: Out = none[-1], In = none[-1] Aug 30 18:50:26 bryden ppp[215]: IPCP: deflink: RecvConfigAck(2) state = Ack-Sent Aug 30 18:50:26 bryden ppp[215]: IPCP: deflink: State change Ack-Sent --> Opened Aug 30 18:50:26 bryden ppp[215]: IPCP: deflink: LayerUp. Aug 30 18:50:26 bryden ppp[215]: IPCP: myaddr 203.3.126.129 hisaddr = 203.3.126.1 Aug 30 18:50:26 bryden ppp[215]: Command: MYADDR: delete ALL Aug 30 18:50:26 bryden ppp[215]: Command: MYADDR: add 0 0 HISADDR Aug 30 19:16:11 bryden ppp[215]: Phase: Idle timer expired. Aug 30 19:16:11 bryden ppp[215]: IPCP: deflink: LayerDown: 203.3.126.129 Aug 30 19:16:11 bryden ppp[215]: IPCP: deflink: SendTerminateReq(3) state = Opened Aug 30 19:16:11 bryden ppp[215]: IPCP: deflink: State change Opened --> Closing Aug 30 19:16:11 bryden ppp[215]: IPCP: deflink: RecvTerminateAck(3) state = Closing Aug 30 19:16:11 bryden ppp[215]: IPCP: deflink: LayerFinish. Aug 30 19:16:11 bryden ppp[215]: IPCP: Connect time: 1545 secs: 146150 octets in, 101909 octets out Aug 30 19:16:11 bryden ppp[215]: IPCP: total 160 bytes/sec, peak 2940 bytes/sec on Mon Aug 30 19:16:11 1999 Aug 30 19:16:11 bryden ppp[215]: IPCP: deflink: State change Closing --> Closed Aug 30 19:16:11 bryden ppp[215]: Phase: bundle: Terminate Aug 30 19:16:11 bryden ppp[215]: CCP: deflink: LayerDown. Aug 30 19:16:11 bryden ppp[215]: CCP: deflink: State change Opened --> Starting Aug 30 19:16:11 bryden ppp[215]: CCP: deflink: LayerFinish. Aug 30 19:16:11 bryden ppp[215]: CCP: deflink: State change Starting --> Initial Aug 30 19:16:11 bryden ppp[215]: LCP: deflink: LayerDown Aug 30 19:16:11 bryden ppp[215]: LCP: deflink: SendTerminateReq(2) state = Opened Aug 30 19:16:11 bryden ppp[215]: LCP: deflink: State change Opened --> Closing Aug 30 19:16:11 bryden ppp[215]: Phase: deflink: open -> lcp Aug 30 19:16:11 bryden ppp[215]: IPCP: deflink: State change Closed --> Initial Aug 30 19:16:12 bryden ppp[215]: LCP: deflink: RecvTerminateAck(2) state = Closing Aug 30 19:16:12 bryden ppp[215]: LCP: deflink: LayerFinish Aug 30 19:16:12 bryden ppp[215]: LCP: deflink: State change Closing --> Closed Aug 30 19:16:12 bryden ppp[215]: LCP: deflink: State change Closed --> Initial Aug 30 19:16:12 bryden ppp[215]: Phase: deflink: Disconnected! Aug 30 19:16:12 bryden ppp[215]: Phase: deflink: lcp -> hangup Aug 30 19:16:12 bryden ppp[215]: Phase: deflink: Connect time: 1579 secs: 154413 octets in, 156025 octets out Aug 30 19:16:12 bryden ppp[215]: Phase: total 196 bytes/sec, peak 2911 bytes/sec on Mon Aug 30 19:16:12 1999 Aug 30 19:16:12 bryden ppp[215]: Phase: deflink: hangup -> closed Aug 30 19:16:12 bryden ppp[215]: Phase: bundle: Dead Aug 30 19:39:00 bryden ppp[215]: Phase: Signal 1, terminate. Aug 30 19:39:00 bryden ppp[215]: Phase: Signal 1, terminate. Aug 30 19:39:00 bryden ppp[215]: Phase: PPP Terminated (normal). To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?009901bef32f$481e2460$857e03cb>