Date: Sat, 29 Jan 2011 15:19:26 -0800 From: Garrett Cooper <gcooper@FreeBSD.org> To: "Bjoern A. Zeeb" <bzeeb-lists@lists.zabbadoz.net> Cc: freebsd-hackers@freebsd.org, freebsd-stable@freebsd.org Subject: Re: KERN - mfi driver for Dell raid h200 on r210 servers Message-ID: <AANLkTi=wbi3B%2BxSKBR-6TsFbBHWP26PE=HBUpKYBzG-1@mail.gmail.com> In-Reply-To: <20110129222400.R39951@maildrop.int.zabbadoz.net> References: <AANLkTikfZ_ba4w975Y9pB4inY2xWae2i0253SM=ie-G0@mail.gmail.com> <20110129222400.R39951@maildrop.int.zabbadoz.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Jan 29, 2011 at 2:24 PM, Bjoern A. Zeeb
<bzeeb-lists@lists.zabbadoz.net> wrote:
> On Sat, 29 Jan 2011, Damien Fleuriot wrote:
>
>> Hello lists,
>>
>>
>>
>> I'm trying to get FreeBSD 8.0 or 8.1 to run on a Dell poweredge r210
>> server.
>>
>> It ships with a SATA/SAS h200 RAID controller.
>>
>>
>> Sadly, the MFI driver doesn't seem to register for this card...
>>
>>
>> Find below the pciconf -lcvb
>>
>> --
>> none6@pci0:1:0:0: =A0 =A0 =A0 class=3D0x010700 card=3D0x1f1d1028 chip=3D=
0x00721000
>> rev=3D0x02 hdr=3D0x00
>> =A0 vendor =A0 =A0 =3D 'LSI Logic (Was: Symbios Logic, NCR)'
>> =A0 class =A0 =A0 =A0=3D mass storage
>> =A0 subclass =A0 =3D SAS
>> =A0 bar =A0 [10] =3D type I/O Port, range 32, base 0xfc00, size 256, ena=
bled
>> =A0 bar =A0 [14] =3D type Memory, range 64, base 0xdf2b0000, size 65536,=
enabled
>> =A0 bar =A0 [1c] =3D type Memory, range 64, base 0xdf2c0000, size 262144=
,
>> enabled
>> =A0 cap 01[50] =3D powerspec 3 =A0supports D0 D1 D2 D3 =A0current D0
>> =A0 cap 10[68] =3D PCI-Express 2 endpoint max data 256(4096) link x8(x8)
>> =A0 cap 03[d0] =3D VPD
>> =A0 cap 05[a8] =3D MSI supports 1 message, 64 bit
>> =A0 cap 11[c0] =3D MSI-X supports 15 messages in map 0x14
>> --
>>
>>
>> I have added the following to /usr/src/sys/dev/mfi/mfi_pci.c at line 119=
:
>> --
>> {0x1000, 0x0072, 0x1028, 0x1f1e, MFI_FLAGS_GEN2, =A0"Dell PERC H200
>> Integrated"},
>> --
>
> It's 1f1d not 1f1e. =A0I hope it was only a paste problem into email?
+1. PERC7 should be supported by mfi(4) (required bits may need to
be added to mfi(4) though as you've pointed out, but additional
details may need to be obtained from Dell).
Thanks,
-Garrett
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTi=wbi3B%2BxSKBR-6TsFbBHWP26PE=HBUpKYBzG-1>