Date: Wed, 17 Jan 2001 11:21:16 -0800 (PST) From: John Baldwin <jhb@FreeBSD.org> To: Mike Smith <msmith@FreeBSD.org> Cc: freebsd-smp@FreeBSD.org, freebsd <freebsd@bugtracker.compusa.com> Subject: Re: problems with smp on compaq 1600 Message-ID: <XFMail.010117112116.jhb@FreeBSD.org> In-Reply-To: <200101171929.f0HJTag01025@mass.osd.bsdi.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 17-Jan-01 Mike Smith wrote: >> >> > btw what does this mean? Extended Table HOSED! > > It probably means that your APIC table has the traditional off-by-one > Compaq error. Note that your situation also looks like the traditional > "no clock interrupts" hang. > >> Ok, after comparing the two tables, it looks like you have interrupts on >> pins >> higher than 23, which might be the problem. Peter, does -current support 32 >> APIC ints now? If so, you could try installing a current snapshot as a test >> to >> see if it works. If it does, then 5.0 will run in Full mode fine, but 4.x >> will >> need the mapped mode. > > Actually, either mode *should* work with 4.x, since we pack intpins down > based on their usage, not their pin number (Tor fixed this a while back). > I've installed 4.2 on a ProFusion box with a single 64-pin APIC (the RAID > controller was on pin 50-something). Ok. I wasn't sure about that part. Thanks for clarifying. -- John Baldwin <jhb@FreeBSD.org> -- http://www.FreeBSD.org/~jhb/ PGP Key: http://www.baldwin.cx/~john/pgpkey.asc "Power Users Use the Power to Serve!" - http://www.FreeBSD.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.010117112116.jhb>