Date: Sun, 7 Jul 2013 21:58:43 +0200 From: Denis D <demonking@hotmail.de> To: "freebsd-current@freebsd.org" <freebsd-current@freebsd.org> Subject: msk0 watchdog timeout and interrupt storm Message-ID: <DUB121-W236FFC3A8C0DCE9B0555CBC97F0@phx.gbl>
next in thread | raw e-mail | index | archive | help
Hello Community=2C I hope someone could help me with this problem. The last days I have tried = to find a solution=2C but haven't found one. The watchdog timeout happens=2C when I'm going to download something or cop= y a file on my FTP server. When I start the transfer of the file=2C I wait = a moment and then my down-/upload freezes at something around 500[ ]KB. Aft= er waiting a little while or press a key like "return"=2C it comes to the i= nterrupt storm. interrupt storm detected on "irq51:"=3B throttling interrupt source Here is some information about my system: ifconfig msk0 msk0: flags=3D8843<UP=2CBROADCAST=2CRUNNING=2CSIMPLEX=2CMULTICAST> metric 0= mtu 1500 options=3Dc009b<RXCSUM=2CTXCSUM=2CVLAN_MTU=2CVLAN_HWTAGGING=2CVLA= N_HWCSUM=2CVLAN_HWTSO=2CLINKSTATE> ether bc:ae:c5:5a:ef:ec inet 192.168.2.3= 0 netmask 0xffffff00 broadcast 192.168.2.255 nd6 options=3D29<PERFORMNUD=2C= IFDISABLED=2CAUTO_LINKLOCAL> media: Ethernet autoselect (100baseTX <full-du= plex=2Cflowcontrol=2Crxpause=2Ctxpause>) status: active pciconf -lv mskc0@pci0:3:0:0: class=3D0x020000 card=3D0x84391043 chip=3D0x438111ab rev= =3D0x11 hdr=3D0x00 vendor =3D 'Marvell Technology Group Ltd.' device =3D 'Y= ukon Optima 88E8059 [PCIe Gigabit Ethernet Controller with AVB]' class =3D = network subclass =3D ethernet vmstat -i interrupt total rateirq1: atkbd0 916 2irq16: hdac1 97 0irq17: ehci0 ehci1+ = 8729 21irq18: ohci0 ohci1* 67 0irq19: ahci1 2883 7irq25: hdac0 4 0irq51: ms= kc0 90 0irq256: hpet0:t0 30332 75Total 43118 107 loader.conf hw.msk.msi_disable=3D1hw.pci.enable_msi=3D0hw.pci.enable_msix=3D0rc.confCod= e:hostname=3D"FreeBSD.local.domain"keymap=3D"german.iso.acc.kbd"ifconfig_ms= k0=3D"DHCP" sshd_enable=3D"YES"moused_enable=3D"YES"powerd_enable=3D"YES"# Set dumpdev = to "AUTO" to enable crash dumps=2C "NO" to disabledumpdev=3D"AUTO" I have also tried to change ifconfig_msk0=3D"DHCP" to ifconfig_msk0=3D"SYNC= DHCP" but nothing changed. If nothing helps=2C I will buy a new network card.=20 _______________________________________________ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe=2C send any mail to "freebsd-current-unsubscribe@freebsd.org= " Too many newsletters? You can unsubscribe or better yet=2C schedule automat= ic cleanup.ActionsDenis D8:33 PMTo: freebsd-current@freebsd.orgtrying to fi= x my format =3B) Hello Community=2CI hope someone could help me with this problem. The last = days I have tried to find a solution=2C but haven't found one.The watchdog = timeout happens=2C when I'm going to download something or copy a file on m= y FTP server. When I start the transfer of the file=2C I wait a moment and = then my down-/upload freezes at something around 500 KB. After waiting a li= ttle while or press a key like "return"=2C it comes to the interrupt storm.= interrupt storm detected on "irq51:"=3B throttling interrupt sourceHere is = some information about my system:ifconfig msk0msk0: flags=3D8843<UP=2CBROAD= CAST=2CRUNNING=2CSIMPLEX=2CMULTICAST> metric 0 mtu 1500 options=3Dc009b<RXCSUM=2CTXCSUM=2CVLAN_MTU=2CVLAN_HWTAGGING=2CVLAN_HWCSUM= =2CVLAN_HWTSO=2CLINKSTATE> ether bc:ae:c5:5a:ef:ec inet 192.168.2.30 netmask 0xffffff00 broadcast 192.168.2.255=20 nd6 options=3D29<PERFORMNUD=2CIFDISABLED=2CAUTO_LINKLOCAL> media: Ethernet autoselect (100baseTX <full-duplex=2Cflowcontrol=2Crxpause= =2Ctxpause>) status: activepciconf -lvmskc0@pci0:3:0:0: class=3D0x020000 card=3D0x84391= 043 chip=3D0x438111ab rev=3D0x11 hdr=3D0x00 vendor =3D 'Marvell Technology Group Ltd.' device =3D 'Yukon Optima 88E8059 [PCIe Gigabit Ethernet Controller = with AVB]' class =3D network subclass =3D ethernetvmstat -iinterrupt tota= l rate irq1: atkbd0 916 2 irq16: hdac1 97 0 irq17: ehci0 ehci1+ 8729 21 irq18: ohci0 ohci1* 67 0 irq19: ahci1 2883 7 irq25: hdac0 4 0 irq51: mskc0 90 0 irq256: hpet0:t0 30332 75 Total 43118 107loader.confhw.msk.msi_di= sable=3D1 hw.pci.enable_msi=3D0 hw.pci.enable_msix=3D0 rc.conf hostname=3D"FreeBSD.local.domain" keymap=3D"german.iso.acc.kbd" ifconfig_msk0=3D"DHCP"sshd_enable=3D"YES" moused_enable=3D"YES" powerd_enable=3D"YES" # Set dumpdev to "AUTO" to enable crash dumps=2C "NO" to disable dumpdev=3D"AUTO"I have also tried to change ifconfig_msk0=3D"DHCP" to ifcon= fig_msk0=3D"SYNCDHCP" but nothing changed.If nothing helps=2C I will buy a = new network card.=20 =
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?DUB121-W236FFC3A8C0DCE9B0555CBC97F0>