Date: Wed, 30 Jan 2008 10:11:18 +0900 From: Pyun YongHyeon <pyunyh@gmail.com> To: Fabian Keil <freebsd-listen@fabiankeil.de> Cc: freebsd-current@FreeBSD.org Subject: Re: CFT: re(4) WOL support Message-ID: <20080130011118.GB5065@cdnetworks.co.kr> In-Reply-To: <20080129211425.69fb66a3@fabiankeil.de> References: <20080122051604.GC10560@cdnetworks.co.kr> <20080129211425.69fb66a3@fabiankeil.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Jan 29, 2008 at 09:14:25PM +0100, Fabian Keil wrote: > Pyun YongHyeon <pyunyh@gmail.com> wrote: > > > Attached patch enables WOL capability on re(4). Since there are too > > many variants of hardwares that uses re(4), I'd like to hear > > success/failure report of the patch prior to commit. You can wake > > the system in suspend state as well as power down state. Because > > suspend/resume does not work on my box I don't know whether waking > > up from suspend work. WOL packets can be greated with tools like > > ports/net/wol. > > Suspending doesn't work on my system either, > but I successfully tested wake-up from power-down state with: > > fk@africanqueen ~ $pciconf -lv | grep -A 4 re0 > re0@pci0:0:9:0: class=0x020000 card=0x816910ec chip=0x816910ec rev=0x10 hdr=0x00 > vendor = 'Realtek Semiconductor' > device = 'RTL8110SB Single-Chip Gigabit LOM Ethernet Controller' > class = network > subclass = ethernet > > fk@africanqueen ~ $ifconfig re0 > re0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=399b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_UCAST,WOL_MCAST,WOL_MAGIC> > ether [...] > inet 192.168.5.48 netmask 0xffffff00 broadcast 192.168.5.255 > media: Ethernet autoselect (1000baseTX <full-duplex>) > status: active > > I didn't notice any regressions. > > Thanks for all the effort you put into re(4), much appreciated. > Thanks for your testing! > Fabian -- Regards, Pyun YongHyeon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080130011118.GB5065>