Date: Thu, 17 Feb 2000 00:31:02 -0500 (EST) From: Andrew Maltsev <am@amsoft.ru> To: freebsd-current@freebsd.org Subject: 4.0 hangs (fwd) Message-ID: <200002170533.AAA07811@amsoft.ru>
next in thread | raw e-mail | index | archive | help
Hi, guys!
Any comments? I had to downgrade back to 3.4 yesterday.. which works
absolutely without problems. If you're going to say ``it's hardware
problem'' -- this was my first thought too. I tried to change memory and
it did not help. Ideas?
Yours,
Andrew.
----- Forwarded message (env-from am) -----
>From am Sat Feb 12 16:03:39 2000
Subject: 4.0 hangs
To: freebsd-current@freebsd.org
Date: Sat, 12 Feb 2000 16:03:39 -0500 (EST)
X-Mailer: ELM [version 2.4ME+ PL54 (25)]
I upgraded to 4.0 from 3.4-stable some days ago. Upgrade (make world)
itself was not smooth, /bin/sh was replaced with new version during
install phase. And old 3.4 kernel can't handle some system calls of it,
so everything traps with sig12. I had to first build new kernel, for
which new `config' is required ans so on. But may be it is supposed to
upgrade kernel first and this mess is my fault.
Anyway, now I have 4.0 system and 4.0 kernel. Every 15 minutes or so it
silently hangs or reboots. I upgraded kernel to today's cvs.. nothing
changed. I removed linux support, P1003_1B option. Now it can work for
about 1..2 hour in a row. 3.4 version worked for weeks without any
problems on the same hardware.
I cannot see any relations of halts with what I do. It appears, that it
happens at the moments of active swapping.. But once it halted while I read
the mail and the system was idle.
I would like to dig in this problem. Any way to see where it hangs
(working under X)? I would really appreciate any help..
My dmesg:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Sat Feb 12 10:52:21 EST 2000
root@croco.amsoft.ru:/usr/var/SRC/FreeBSD/r4/src/sys/compile/Croco-bare
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (467.73-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 67108864 (65536K bytes)
avail memory = 62255104 (60796K bytes)
Preloaded elf kernel "kernel" at 0xc02b5000.
Preloaded splash_image_data "/boot/splash.bmp" at 0xc02b509c.
Preloaded elf module "splash_bmp.ko" at 0xc02b50ec.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga-pci0: <ATI Mach64-GB graphics accelerator> port 0xd000-0xd0ff mem 0xe5000000-0xe5000fff,0xe6000000-0xe6ffffff irq 11 at device 0.0 on pci1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX4 ATA-33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0 at 0x01f0 irq 14 on ata-pci0
pci0: Intel 82371AB/EB (PIIX4) USB controller (vendor=0x8086, dev=0x7112) at 7.2
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
pcm0: <AudioPCI ES1371> port 0xe400-0xe43f irq 10 at device 17.0 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ad0: 8693MB <IBM-DJNA-370910> [17662/16/63] at ata0-master using UDMA33
acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-113 0112> at ata0-slave using UDMA33
Mounting root from ufs:/dev/wd0s2a
WARNING: / was not properly dismounted
----- End of forwarded message (env-from am) -----
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200002170533.AAA07811>