Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 5 Nov 2007 15:05:42 +0200
From:      Giorgos Keramidas <keramida@freebsd.org>
To:        "Aryeh M. Friedman" <aryeh.friedman@gmail.com>
Cc:        freebsd-current@freebsd.org
Subject:   Re: 8.0-CURRENT: acd0+geom related panic
Message-ID:  <20071105130542.GA19309@kobe.laptop>
In-Reply-To: <472F0837.8040506@gmail.com>
References:  <20071105114729.GA2093@kobe.laptop> <472F0837.8040506@gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On 2007-11-05 07:10, "Aryeh M. Friedman" <aryeh.friedman@gmail.com> wrote:
> Giorgos Keramidas wrote:
> > With a recent kernel (built from sources at -D '2007.11.03.10.36.03')
> > I can reliably panic CURRENT by simply running:
> >
> >     keramida % cdcontrol -f /dev/acd0 eject
> 
> Which ICH was this on?

I don't see how this can be related, but here it is:

atapci0: <Intel ICH7M SATA300 controller>
  port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xafa0-0xafaf
  irq 19 at device 31.2 on pci0

Attached below is a /var/run/dmesg.boot copy (not verbose though,
I managed to lost that when I panicked this laptop in the morning):

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #0: Sun Nov  4 06:20:54 EET 2007
    build@kobe:/home/build/obj/home/build/src/sys/KOBE
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU           T2400  @ 1.83GHz (1828.77-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6e8  Stepping = 8
  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xc1a9<SSE3,MON,VMX,EST,TM2,xTPR,PDCM>
  Cores per package: 2
real memory  = 528089088 (503 MB)
avail memory = 507056128 (483 MB)
ACPI APIC Table: <TOSHIB 750     >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <TOSHIB 750> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1f6a0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xd808-0xd80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xcff8-0xcfff mem 0xffd80000-0xffdfffff,0xe0000000-0xefffffff,0xffd40000-0xffd7ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> at device 2.1 on pci0
pcm0: <Intel 82801G High Definition Audio Controller> at device 27.0 on pci0
pcm0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xcf80-0xcf9f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xcf60-0xcf7f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xcf40-0xcf5f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xcf20-0xcf3f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffd3fc00-0xffd3ffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
fxp0: <Intel Pro/100 VE Network Connection> port 0xbf40-0xbf7f mem 0xffaff000-0xffafffff irq 20 at device 8.0 on pci3
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:0e:7b:77:8c:f0
fxp0: [ITHREAD]
cbb0: <PCI-CardBus Bridge> at device 11.0 on pci3
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
fwohci0: <1394 Open Host Controller Interface> at device 11.1 on pci3
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:39:00:00:ad:d6:2a
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:39:ad:d6:2a
fwe0: Ethernet address: 02:00:39:ad:d6:2a
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:00:39:00:00:ad:d6:2a @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x110c000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
pci3: <mass storage> at device 11.2 (no driver attached)
pci3: <base peripheral> at device 11.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7M SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xafa0-0xafaf irq 19 at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
acpi_lid0: <Control Method Lid Switch> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ums0: <Genius NetScroll + Mini Traveler, class 0/0, rev 1.10/1.10, addr 2> on uhub0
ums0: 3 buttons and Z dir.
ugen0: <STMicroelectronics Biometric Coprocessor, class 0/0, rev 1.00/0.01, addr 2> on uhub1
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad0: 76319MB <TOSHIBA MK8032GSX AS111G> at ata0-master SATA150
acd0: DVDR <MATSHITADVD-RAM UJ-842S/1.01> at ata1-master UDMA33
pcm0: <HDA Codec: Analog Devices AD1981HD>
pcm0: <HDA Driver Revision: 20071020_0048>
ath0: <Atheros 5212> mem 0xffa10000-0xffa1ffff irq 21 at device 0.0 on cardbus0
ath0: [ITHREAD]
ath0: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:0f:cb:f9:48:1a
ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ-842S 1.01> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1a



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20071105130542.GA19309>