Date: Mon, 23 Jul 2001 01:56:29 -0500 From: "Mario Doria" <madd@tecdigital.net> To: "Greg Lehey" <grog@FreeBSD.org> Cc: <questions@freebsd.org> Subject: Re: Lucent WaveLAN install Message-ID: <001601c11344$9a0b72f0$0a00a8c0@Valk> References: <000901c11305$a8e18240$0a00a8c0@Valk> <20010723094917.D18813@wantadilla.lemis.com> <000901c1132e$494cae30$0a00a8c0@Valk> <20010723142647.G55779@wantadilla.lemis.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0013_01C1131A.B04D2DD0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Hi again,
Before continuing with the messages, I think it is not being recognized. What
can I do now?
> So, why did you reboot?
Compilled a new kernel.
> 1. Is pccardd running? Try:
Yes it is.
> 2. If pccardd is running, look at the output of dmesg:
Here is my dmesg output:
FreeBSD 4.3-RELEASE #0: Mon Jul 23 01:13:26 CDT 2001
root@valk.localdomain:/usr/src/sys/compile/VALK
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (498.78-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,MMX,FXSR,SSE>
real memory = 268369920 (262080K bytes)
config> q
avail memory = 257863680 (251820K bytes)
Preloaded elf kernel "kernel" at 0xc033d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc033d09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11
pcic-pci0: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at
device 2.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC
pci int + CSC serial isa irq]
pcic-pci1: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 at
device 2.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC
pci int + CSC serial isa irq]
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1800-0x183f mem
0xf4100000-0xf411ffff,0xf4120000-0xf4120fff irq 11 at device 3.0 on pci0
fxp0: Ethernet address 00:90:27:97:3c:ce
pci0: <unknown card> (vendor=0x115d, dev=0x000c) at 3.1 irq 11
pci0: <unknown card> (vendor=0x1013, dev=0x6003) at 5.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1850-0x185f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1860-0x187f irq 11 at
device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device
7.3 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: cannot reserve I/O port range
IP Filter: v3.4.16 initialized. Default = pass all, Logging = disabled
ad0: 5729MB <IBM-DJSA-210> [12416/15/63] at ata0-master UDMA33
acd0: CDROM <CRN-8241U> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s3a
pccard: card inserted, slot 0
> 3. If you don't see anything useful in the dmesg output, look in
> /var/log/messages. Again, copy anything relevant.
Here's my output:
Jul 23 01:42:07 valk /kernel: pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000
on isa0
Jul 23 01:42:07 valk /kernel: pcic0: Polling mode
Jul 23 01:42:07 valk /kernel: pccard0: <PC Card bus -- kludge version> on pcic0
Jul 23 01:42:07 valk /kernel: pccard1: <PC Card bus -- kludge version> on pcic0
Jul 23 01:42:07 valk /kernel: pccard: card inserted, slot 0
Jul 23 01:42:07 valk /kernel: Setup PC-CARD:
Jul 23 01:42:07 valk /kernel: memory
Jul 23 01:42:07 valk /kernel: beep
Jul 23 01:42:07 valk /kernel: pccardd
Jul 23 01:42:07 valk /kernel: .
Jul 23 01:42:07 valk /kernel: Doing initial network setup:
Jul 23 01:42:07 valk /kernel: hostname
Jul 23 01:42:09 valk pccardd[83]: No card in database for "(null)"("(null)")
Jul 23 01:42:09 valk pccardd[83]: pccardd started
> 4. If you don't see anything at all in (2) or (3), try the output of
>
> $ pccardc dumpcis
Attached is the output of "pccardc dumpcis".
Thanks for all your help,
Mario Doria
------=_NextPart_000_0013_01C1131A.B04D2DD0
Content-Type: application/octet-stream;
name="pccardc-dumpcis.output"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="pccardc-dumpcis.output"
Code 85 not found=0A=
Code 85 not found=0A=
code Unknown ignored=0A=
Code 176 not found=0A=
Code 176 not found=0A=
code Unknown ignored=0A=
Code 36 not found=0A=
Code 36 not found=0A=
code Unknown ignored=0A=
Code 192 not found=0A=
Code 192 not found=0A=
code Unknown ignored=0A=
Code 85 not found=0A=
Code 85 not found=0A=
code Unknown ignored=0A=
Code 177 not found=0A=
Code 177 not found=0A=
code Unknown ignored=0A=
Code 114 not found=0A=
Code 114 not found=0A=
code Unknown ignored=0A=
Code 131 not found=0A=
Code 131 not found=0A=
code Unknown ignored=0A=
Code 101 not found=0A=
Code 101 not found=0A=
code Unknown ignored=0A=
Code 83 not found=0A=
Code 83 not found=0A=
code Unknown ignored=0A=
Code 160 not found=0A=
Code 160 not found=0A=
code Unknown ignored=0A=
Configuration data for card in slot 0=0A=
Tuple #1, code =3D 0x0 (Null tuple), length =3D 12=0A=
000: be cb da 00 00 00 00 00 00 20 40 60=0A=
Tuple #2, code =3D 0x0 (Null tuple), length =3D 32=0A=
000: 55 44 16 00 01 77 00 b0 20 50 49 2e c0 8b 2e c0=0A=
010: 50 49 86 29 00 18 00 00 0c 01 00 00 2e c0 8b 8b=0A=
Tuple #3, code =3D 0x0 (Null tuple), length =3D 110=0A=
000: 01 00 00 00 00 9b bc 02 00 00 00 c5 00 00 0d 43=0A=
010: 70 72 67 74 28 29 31 39 2d 30 31 20 6e 65 20 6f=0A=
020: 70 72 74 6f 00 0a 6e 74 61 69 69 67 49 74 6c 52=0A=
030: 20 6f 74 41 65 74 56 72 69 6e 34 30 31 00 0a 58=0A=
040: 20 2e 20 75 6c 20 38 20 57 4d 32 30 00 20 50 20=0A=
050: 32 37 0d 00 18 18 ff 00 30 54 41 01 f2 00 04 11=0A=
060: 00 02 02 29 b4 cd 0a 74 32 c3 01 16 02 c0=0A=
Tuple #4, code =3D 0x0 (Null tuple), length =3D 2=0A=
000: e4 c0=0A=
Tuple #5, code =3D 0x0 (Null tuple), length =3D 236=0A=
000: 60 46 b4 bb 00 01 cd 66 90 c2 00 20 e2 c3 0d dc=0A=
010: 6a e8 ff 55 ec 53 c5 04 07 00 09 e4 e8 ff eb 1f=0A=
020: 58 c2 00 8b 50 46 24 04 3c 76 04 50 a2 58 c2 00=0A=
030: 8b 50 46 c0 04 e8 ff c0 50 d1 58 c2 00 8b 50 46=0A=
040: 86 50 d9 86 50 d3 58 c2 00 8b 66 66 46 66 c0 50=0A=
050: d7 66 c0 50 cf 66 5d 04 55 ec 50 8b 04 c1 10 e8=0A=
060: ff 3a 36 66 c0 50 ab 66 5d 04 55 ec 53 1e 46 8e=0A=
070: 06 8b 08 4e 67 03 43 f9 59 5b e4 c2 00 66 06 30=0A=
080: 2b 8b 4e 02 75 16 66 f6 f5 6c 66 c0 c0 c1 04 03=0A=
090: 89 02 c1 10 46 88 07 46 2f c6 05 8d 10 56 66 ca=0A=
0a0: 88 04 76 66 ca c7 00 ff 46 93 6c 89 02 c1 10 5e=0A=
0b0: 88 07 c1 10 46 ff c6 05 b4 f8 15 5d c4 55 07 5e=0A=
0c0: 32 80 00 01 c3 00 a3 00 00 10 11 20 b0 20 31 10=0A=
0d0: 65 b8 30 b8 66 2e 1e 01 e1 b8 b1 1a 10 fc 75 80=0A=
0e0: 1f c9 b8 b1 1a 61 66 2e 1e 01 02 b8=0A=
Tuple #6, code =3D 0x0 (Null tuple), length =3D 26=0A=
000: fc 75 81 49 75 f8 18 8b 0c bf 00 08 cd 80 00 06=0A=
010: f9 72 f8 61 2e 06 02 00 2a bc=0A=
Tuple #7, code =3D 0x0 (Null tuple), length =3D 46=0A=
000: 06 02 00 1c 60 8b 0c bf 00 0a cd 80 01 30 b8 b1=0A=
010: 1a 61 2e 06 02 00 22 88 72 2e 06 02 00 14 60 8b=0A=
020: 0c 66 c9 30 b8 b1 1a 61 52 4c 2c 88 02 00=0A=
Tuple #8, code =3D 0x3 (Indirect access), length =3D 0=0A=
Tuple #9, code =3D 0x0 (Null tuple), length =3D 214=0A=
000: 00 04 01 cb 60 06 40 26 13 0e 83 20 e0 66 33 66=0A=
010: 00 00 2e 0e 03 03 b4 66 c1 03 00 d1 66 e9 66 83=0A=
020: 40 00 73 0e 14 e8 fd 62 0d 50 45 45 30 20 68 73=0A=
030: 73 73 65 20 6f 73 6e 74 68 76 20 6e 75 68 66 65=0A=
040: 20 6f 76 6e 69 6e 6c 6d 6d 72 2e 8e 33 26 3d 0f=0A=
050: 78 47 ff 04 f1 93 c3 eb fa d2 c4 40 26 0e 00 e9=0A=
060: c1 06 d1 8b ba 52 fb 66 83 e8 00 19 2e 16 02 2e=0A=
070: b7 e0 66 0f 0e 02 03 eb 66 8b e8 66 0f 1e 02 2e=0A=
080: b7 ee 66 d9 03 66 c2 66 ea 66 e2 66 db 53 c1 06=0A=
090: c1 04 8b b4 2e 0e 03 c1 d1 e8 fe 49 9c 84 9d 02=0A=
0a0: 71 50 e0 0e 23 50 ff bc 2e 0c 2e 1e 00 8b 46 cb=0A=
0b0: 5d e5 5b 8e 8b fb 8b b4 2e 0e 03 c1 03 e9 d1 c1=0A=
0c0: 0a 03 ba 81 00 8e 33 33 fc aa 1d 0a 45 69 69 67=0A=
0d0: 74 65 52 4c 4c 61=0A=
Tuple #10, code =3D 0x0 (Null tuple), length =3D 13=0A=
000: 0a 0e 59 e8 fb 86 2d ba c6 15 1f 61 c0=0A=
Tuple #11, code =3D 0x1 (Common memory descriptor), length =3D 14=0A=
000: 2b 83 00 01 e8 fb 68 00 ce 0e 80 e8 fb b9=0A=
Common memory device information:=0A=
Device number 1, type OTPROM, WPS =3D ON=0A=
Speed =3D 150nS, Memory block size =3D 32Kb, 17 units=0A=
Device number 2, type No device, WPS =3D OFF=0A=
Speed =3D No speed, Memory block size =3D 2Kb, 1 units=0A=
Device number 3, type Extended, WPS =3D ON=0A=
Speed =3D No speed, Memory block size =3D 32Kb, 32 units=0A=
Device number 4, type SRAM, WPS =3D ON=0A=
Speed =3D No speed, Memory block size =3D 512b, 1 units=0A=
Device number 5, type Reserved, WPS =3D ON=0A=
Speed =3D Reserved, Memory block size =3D 2Mb, 2 units=0A=
Device number 6, type Reserved, WPS =3D OFF=0A=
Speed =3D No speed, Memory block size =3D 512b, 30 units=0A=
Device number 7, type Reserved, WPS =3D ON=0A=
Speed =3D 150nS, Memory block size =3D 2Kb, 24 units=0A=
Tuple #12, code =3D 0x0 (Null tuple), length =3D 102=0A=
000: 57 1e 0f 0f 66 83 e8 00 0b f7 da 40 0f ec ba c0=0A=
010: da 3e 00 aa 84 00 c2 00 06 fa f0 e8 2e 3e 02 0f=0A=
020: c6 0e 19 e8 fb 53 1e 40 8e b9 00 1e 00 df f8 fb=0A=
030: f4 5b e9 01 0a 58 2d 43 3a 42 73 2d 6f 65 52 4d=0A=
040: 49 20 74 75 74 72 20 61 20 6f 20 6f 6e 2e 81 ff=0A=
050: 81 00 81 00 c1 04 d3 88 79 8a 02 80 00 84 ff e3=0A=
060: 0f 67 53 6a 1e 00=0A=
Tuple #13, code =3D 0x0 (Null tuple), length =3D 60=0A=
000: 74 e9 ff 3e 00 ff 74 3b 73 66 3d 42 24 b1 b6 04=0A=
010: f8 72 50 00 1e 00 70 3c 74 eb 8c 8e 66 83 e8 00=0A=
020: 1e f7 da 40 0f e1 83 f0 83 00 26 3d 42 24 85 00=0A=
030: 68 00 ff 12 2e 36 01 ff 10 2e 36 01=0A=
Tuple #14, code =3D 0xff (Terminator), length =3D 0=0A=
2 slots found=0A=
------=_NextPart_000_0013_01C1131A.B04D2DD0--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001601c11344$9a0b72f0$0a00a8c0>