Date: Wed, 4 Dec 2002 18:53:51 +0200 From: Karo Salminen <karo@karo.kaista.com> To: freebsd-mobile@freebsd.org Cc: freebsd-stable@freebsd.org Subject: USB mouse problem (kernel) Message-ID: <20021204185351.79b90c22.karo@karo.kaista.com> In-Reply-To: <20021203231106.18b5fbb9.karo@karo.kaista.com> References: <20021203102856.21259da9.karo@karo.kaista.com> <1038932129.21052.6.camel@natewks2.ad.newisys.com> <20021203193952.706c2f58.karo@karo.kaista.com> <20021203231106.18b5fbb9.karo@karo.kaista.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--=.30).kZGV?ONWrP Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Hello, the problem is that I can't get USB Mouse to work. At boot it wakes up, but in uhub kernel is idling and then reports of device problem: uhub0: 2 ports with 2 removable, self powered uhub0: device problem, disabling port 1 Tried with GENERIC, same symptom appears. dmesg: FreeBSD 4.7-STABLE #1: Thu Nov 28 20:45:17 EET 2002 root@yabba.kortex.jyu.fi:/usr/obj/annex/src/sys/YABBA Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (797.05-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA, CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 125763584 (122816K bytes) avail memory = 118411264 (115636K bytes) Preloaded elf kernel "kernel" at 0xc03e0000. VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc0366be0 (1000040) VESA: Trident CYBER 8620 Pentium Pro MTRR support enabled md0: Malloc disk pcibios: No call entry point apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <AcerLabs M5247 PCI-PCI(AGP Supported) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <Trident model 8620 VGA-compatible display device> at 0.0 irq 11 pcm0: <Acer Labs M5451> port 0x8000-0x80ff mem 0x81a00000-0x81a00fff irq 10 at device 6.0 on pci0 isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AcerLabs Aladdin ATA66 controller> port 0x7050-0x705f irq 15 at device 16.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 chip1: <AcerLabs M15x3 Power Management Unit> at device 17.0 on pci0 pcic0: <O2micro 6812/6872 PCI-Cardbus Bridge> irq 11 at device 19.0 on pci0 pcic0: PCI Memory allocated: 0x88000000 pcic0: Warning: O2micro OZ68xx chips may not work pccard0: <PC Card 16-bit bus (classic)> on pcic0 ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x81c00000-0x81c00fff irq 11 at device 20.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub0: device problem, disabling port 1 orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/7 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: <PNP0000> can't assign resources unknown: <PNP0303> can't assign resources unknown: <PNP0f13> can't assign resources unknown: <PNP0401> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0700> can't assign resources pccard: card inserted, slot 0 pccard: card removed, slot 0 ad0: 9590MB <IBM-DJSA-210> [19485/16/63] at ata0-master UDMA66 acd0: CDROM <TOSHIBA CD-ROM XM-7002Bc> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a pccard: card inserted, slot 0 ed1 at port 0x300-0x31f irq 11 slot 0 on pccard0 ed1: address 00:20:cb:82:09:32, type NE2000 (16 bit) -- E-mail: karo@karo.kaista.com GSM: +358 45 6728280 --=.30).kZGV?ONWrP Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (FreeBSD) iD8DBQE97jMlvt6lNXuj7xcRAqFuAJ94r14+5dDF2mGMtbulcSQQif9m9gCeJbv3 qvUbYkchgpHQh73Y5Dtx33c= =924f -----END PGP SIGNATURE----- --=.30).kZGV?ONWrP-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021204185351.79b90c22.karo>