Date: Mon, 26 Mar 2001 16:46:31 +0200 From: TAG <tag@xsinet.co.za> To: freebsd-questions@freebsd.org Subject: PPP and callback ?? Message-ID: <3ABF5647.451137EF@xsinet.co.za>
next in thread | raw e-mail | index | archive | help
Hi, I hope that you can help - I have setup freebsd 4.2 to do callback - I get the following errors : Mar 22 14:07:33 tag ppp[3950]: tun0: Phase: deflink: his = none, mine = CHAP 0x05 Mar 22 14:07:33 tag ppp[3950]: tun0: Phase: Chap Output: CHALLENGE Mar 22 14:07:33 tag ppp[3950]: tun0: Phase: Chap Input: RESPONSE (16 bytes from tag-dial) Mar 22 14:07:33 tag ppp[3950]: tun0: Phase: Chap Output: SUCCESS Mar 22 14:07:33 tag ppp[3950]: tun0: Phase: deflink: lcp -> cbcp Mar 22 14:07:33 tag ppp[3950]: tun0: CBCP: deflink: SendReq(0) state = closed Mar 22 14:07:33 tag ppp[3950]: tun0: CBCP: TYPE User-spec Mar 22 14:07:33 tag ppp[3950]: tun0: CBCP: DELAY 0 Mar 22 14:07:33 tag ppp[3950]: tun0: CBCP: deflink: State change closed --> req-sent Mar 22 14:07:38 tag ppp[3950]: tun0: CBCP: deflink: RecvResponse(0) state = req-sent Mar 22 14:07:38 tag ppp[3950]: tun0: CBCP: TYPE User-spec Mar 22 14:07:38 tag ppp[3950]: tun0: CBCP: DELAY 15 Mar 22 14:07:38 tag ppp[3950]: tun0: CBCP: ADDR xxxxxxxxxxx Mar 22 14:07:38 tag ppp[3950]: tun0: CBCP: deflink: SendAck(0) state = req-sent Mar 22 14:07:38 tag ppp[3950]: tun0: CBCP: TYPE User-spec Mar 22 14:07:38 tag ppp[3950]: tun0: CBCP: DELAY 15 Mar 22 14:07:38 tag ppp[3950]: tun0: CBCP: ADDR xxxxxxxxxx Mar 22 14:07:38 tag ppp[3950]: tun0: CBCP: deflink: State change req-sent --> ack-sent Mar 22 14:07:38 tag ppp[3950]: tun0: LCP: deflink: RecvTerminateReq(2) state = Opened Mar 22 14:07:38 tag ppp[3950]: tun0: LCP: deflink: LayerDown Mar 22 14:07:38 tag ppp[3950]: tun0: Phase: deflink: CBCP: Will dial back on xxxxxxxxxxxxx Mar 22 14:07:38 tag ppp[3950]: tun0: LCP: deflink: SendTerminateAck(2) state = Opened Mar 22 14:07:38 tag ppp[3950]: tun0: LCP: deflink: State change Opened --> Stopping Mar 22 14:07:38 tag ppp[3950]: tun0: Phase: deflink: cbcp -> lcp Mar 22 14:07:39 tag ppp[3950]: tun0: Phase: deflink: Carrier lost Mar 22 14:07:39 tag ppp[3950]: tun0: LCP: deflink: State change Stopping --> Starting Mar 22 14:07:39 tag ppp[3950]: tun0: LCP: deflink: LayerFinish Mar 22 14:07:39 tag ppp[3950]: tun0: LCP: deflink: State change Starting --> Initial Mar 22 14:07:39 tag ppp[3950]: tun0: Phase: deflink: Disconnected! Mar 22 14:07:39 tag ppp[3950]: tun0: Phase: deflink: Connect time: 11 secs: 191 octets in, 307 octets out Mar 22 14:07:39 tag ppp[3950]: tun0: Phase: deflink: : 8 packets in, 8 packets out Mar 22 14:07:39 tag ppp[3950]: tun0: Phase: total 45 bytes/sec, peak 81 bytes/sec on Thu Mar 22 14:07:39 2001 Mar 22 14:07:39 tag ppp[3952]: tun0: Phase: Call peer back on xxxxxxxxxxxxx Mar 22 14:07:39 tag ppp[3952]: tun0: CBCP: deflink: State change ack-sent --> closed Mar 22 14:07:39 tag ppp[3952]: tun0: Phase: deflink: lcp -> opening Mar 22 14:07:54 tag ppp[3952]: tun0: Chat: deflink: Redial timer expired. Mar 22 14:07:54 tag ppp[3952]: tun0: Phase: deflink: /dev/cuaa0 is in use Mar 22 14:07:54 tag ppp[3952]: tun0: Chat: Failed to open device Mar 22 14:07:54 tag ppp[3952]: tun0: Phase: deflink: Enter pause (3) for redialing. Mar 22 14:07:57 tag ppp[3952]: tun0: Chat: deflink: Redial timer expired. Mar 22 14:07:57 tag ppp[3952]: tun0: Phase: deflink: /dev/cuaa0 is in use Mar 22 14:07:57 tag ppp[3952]: tun0: Chat: Failed to open device Mar 22 14:07:57 tag ppp[3952]: tun0: Phase: deflink: Enter pause (3) for redialing. Mar 22 14:08:00 tag ppp[3952]: tun0: Chat: deflink: Redial timer expired. Mar 22 14:08:00 tag ppp[3952]: tun0: Phase: deflink: /dev/cuaa0 is in use Mar 22 14:08:00 tag ppp[3952]: tun0: Chat: Failed to open device Mar 22 14:08:00 tag ppp[3952]: tun0: Phase: deflink: Enter pause (3) for redialing. Mar 22 14:08:03 tag ppp[3952]: tun0: Chat: deflink: Redial timer expired. Mar 22 14:08:03 tag ppp[3952]: tun0: Phase: deflink: Connected! Mar 22 14:08:03 tag ppp[3952]: tun0: Phase: deflink: opening -> dial Mar 22 14:08:03 tag ppp[3952]: tun0: Chat: Phone: xxxxxxxxxx I have noticed that the /var/spool/lock/LCK_xxxx file is not removed and the device is always busy - therefore it cannot dial out ?? Any suggestions Many thanks Tonino -- -------------------------------------------------------------- Get your own free Internet access at http://www.xsinet.co.za/ -------------------------------------------------------------- XSInet does not accept any responsibility for the opinions expressed in this email. For Further details please goto: http://www.xsinet.co.za/terms.htm -------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3ABF5647.451137EF>