Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 22 Oct 2008 23:24:49 -0700
From:      Jeremy Chadwick <koitsu@FreeBSD.org>
To:        Milan Obuch <freebsd-stable@dino.sk>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: 6.4 RC1 locks up solid on first reboot
Message-ID:  <20081023062449.GA78633@icarus.home.lan>
In-Reply-To: <200810230627.46478.freebsd-stable@dino.sk>
References:  <A5A9A4D4-CD16-45FA-A2AC-62C4B5AE976D@netconsonance.com> <200810230627.46478.freebsd-stable@dino.sk>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Oct 23, 2008 at 06:27:45AM +0200, Milan Obuch wrote:
> On Thursday 23 October 2008 01:32:27 Jo Rhett wrote:
> > I haven't had time to investigate, but after installing 6.4RC1 on a
> > machine I've been using with 6.3 for a few months, it installs
> > painlessly but on the first and subsequent reboots you see
> >
> > BTX Loader 1.00 blah blah blah
> > ...
> > Loading /boot/defaults/loader.con
> > \
> >
> > At this point you have a hard refreeze -- no keyboard control, however
> > I can reboot it from the Phantom card.
> >
> > System: Rackable C2004, dual Intel 2.66 processors, 4gb RAM, disk
> > drive on built in SCSI port
> >
> > Absolutely nothing special, boots and runs 6.2 and 6.3 without a flaw.
> >
> > I'll have more time to investigate on Friday.  Anything specific that
> > would be more or less useful to debug in particular?
> 
> I did not investigate on this issue too much, but there is an workaround - 
> copy older /boot/loader over newer one. In my case, I am rebuilding whole
> world often, and now /boot/loader seems to not build correctly for me. Older 
> one is ~ 250 kB, rebuilt will be ~ 185 kB, and freezes.
> 
> In your case, you would write old /boot/loader from 6.3 over new installed 
> with 6.4RC1 and it will boot normally again.
> 
> I know it is only workaround, but it's quick and easy, and I have not too much 
> time to investigate any further (not to mention I have no idea what to look 
> for and where).

Has anyone filed a PR on this problem, or contacted John Baldwin?

-- 
| Jeremy Chadwick                                jdc at parodius.com |
| Parodius Networking                       http://www.parodius.com/ |
| UNIX Systems Administrator                  Mountain View, CA, USA |
| Making life hard for others since 1977.              PGP: 4BD6C0CB |




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081023062449.GA78633>