Date: Sat, 29 Jun 2002 17:30:23 -0500 From: leoric <leoric@charter.net> To: freebsd-questions@freebsd.org Subject: xwindows problem Message-ID: <5.1.0.14.0.20020629171404.00ac2488@mail.charter.net>
next in thread | raw e-mail | index | archive | help
Why is it that I get this message when I try to start xwindows as a normal
user?:
$ startx
xauth: (argv):1: bad display name "minotaur.my.domain:0" in "list" command
xauth: (argv):1: bad display name "minotaur.my.domain:0" in "add" command
Fatal server error:
Cannot open log file "/var/log/XFree86.0.log"
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
Please report problems to xfree86@xfree86.org.
giving up.
xinit: No such file or directory (errno 2): unable to connect to X server
xinit: No such process (errno 3): Server error.
xauth: (argv):1: bad display name "minotaur.my.domain:0" in "remove" command
When I run X as root the mouse cursor goes completely berserk and jumps all
around when I move the mouse.
I am using a logitech 3 button mouse (old protocol) and a Creative Blaster
Exxtreme (Permedia 2) video card.
Here's my dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12 GMT 2002
murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (300.68-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 33542144 (32756K bytes)
config> di pcic0
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 27856896 (27204K bytes)
Preloaded elf kernel "kernel" at 0xc04d0000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04d009c.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00f0d10
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
atapci0: <SiS 5591 ATA66 controller> port
0xd000-0xd00f,0xd400-0xd403,0xd800-0xd
807,0xe000-0xe003,0xe400-0xe407 irq 14 at device 0.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <unknown card> (vendor=0x1039, dev=0x0009) at 1.1
ohci0: <SiS 5571 USB controller> mem 0xdf800000-0xdf800fff irq 9 at device
1.2 o
n pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 2.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <SiS 530/620 SVGA controller> at 0.0 irq 11
vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0xa800-0xa87f mem
0xde800000-0xde800
07f irq 5 at device 10.0 on pci0
vr0: Ethernet address: 00:80:c8:e8:1e:bd
miibus0: <MII bus> on vr0
amphy0: <DM9101 10/100 media interface> on miibus0
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <VGA-compatible display device> at 11.0 irq 10
pcib1: <SiS 5591 host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 3060MB <QUANTUM BIGFOOT_CY3240A> [6218/16/63] at ata0-master WDMA2
ad1: 260MB <ST3295A D> [761/14/50] at ata0-slave PIO3
acd0: CDROM <NEC CD-ROM DRIVE:273> at ata1-slave PIO3
Mounting root from ufs:/dev/ad0s1a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.1.0.14.0.20020629171404.00ac2488>