Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 8 Apr 2016 17:20:53 -0300
From:      =?UTF-8?B?T3RhY8OtbGlv?= <otacilio.neto@bsd.com.br>
To:        Adrian Chadd <adrian.chadd@gmail.com>
Cc:        freebsd-current <freebsd-current@freebsd.org>, "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org>
Subject:   Re: WIFI urtwn possibly broken on 297561
Message-ID:  <570812A5.1050600@bsd.com.br>
In-Reply-To: <CAJ-VmokkpVYfceLOUpR44EP=v_dywpf=nC2DVUCU5ZtkE=20Ag@mail.gmail.com>
References:  <57080811.5030405@bsd.com.br> <CAJ-VmokkpVYfceLOUpR44EP=v_dywpf=nC2DVUCU5ZtkE=20Ag@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
The parameter --ff looks like is not valid for my adapter. First I try 
using prompt:
=====================================================================================================
Edit /etc/motd to change this login announcement.
% su
Apr  8 05:04:12 beaglebone su: ota to root on /dev/ttyu0
root@beaglebone:/usr/home/ota # ifconfig wlan0 -ff -amsdu
ifconfig: SIOCS80211: Invalid argument
root@beaglebone:/usr/home/ota # ifconfig wlan0 -ff
ifconfig: SIOCS80211: Invalid argument
root@beaglebone:/usr/home/ota # ifconfig wlan0  -amsdu
root@beaglebone:/usr/home/ota # pkg update
The package management tool is not yet installed on your system.
Do you want to fetch and install it now? [y/N]: y
Bootstrapping pkg from 
pkg+http://nostromo:8080/repo/101armv6-default/.latest, please wait...
^C
root@beaglebone:/usr/home/ota # ping nostromo
PING nostromo (192.168.0.26): 56 data bytes
^C
--- nostromo ping statistics ---
13 packets transmitted, 0 packets received, 100.0% packet loss
root@beaglebone:/usr/home/ota #

=====================================================================================================

And in rc.conf

=====================================================================================================

Feeding entropy:.
ifconfig: SIOCIFCREATE2: Invalid argument
cpsw0: link state changed to DOWN
Starting Network: lo0 cpsw0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
         inet 127.0.0.1 netmask 0xff000000
         groups: lo
         nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
cpsw0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
         options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
         ether 90:59:af:4c:20:9a
         media: Ethernet autoselect (none)
         status: no carrier
         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Soft Float compatibility ldconfig path:
Starting devd.
urtwn0: <vendor 0x0bda product 0x8178, class 0/0, rev 2.00/2.00, addr 3> 
on usbu s1
urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R
urtwn0: enabling 11n
wlan0: Ethernet address: 14:cc:20:12:ee:55
Created wlan(4) interfaces: wlan0.
Starting wpa_supplicant.
Starting dhclient.
wlan0: no link .............. giving up
/etc/rc.d/dhclient: WARNING: failed to start dhclient
Starting Network: wlan0.
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
         ether 14:cc:20:12:ee:55
         groups: wlan
         ssid "" channel 10 (2457 MHz 11g)
         country US authmode WPA1+WPA2/802.11i privacy MIXED deftxkey UNDEF
         txpower 0 bmiss 7 scanvalid 60 protmode CTS wme roaming MANUAL
         bintval 0
         media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
         status: no carrier
         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Waiting 30s for the default route interface: wlan0: link state changed to UP
..(wlan0)
Creating and/or trimming log files.
Starting syslogd.
Clearing /tmp (X related).
Updating motd:.
Mounting late file systems:.
Performing sanity check on sshd configuration.
Could not load host key: /etc/ssh/ssh_host_dsa_key
Starting sshd.
Could not load host key: /etc/ssh/ssh_host_dsa_key
Starting cron.
Starting background file system checks in 60 seconds.

Fri Apr  8 05:09:54 UTC 2016

FreeBSD/arm (beaglebone) (ttyu0)

login: ota
Password:
FreeBSD 11.0-CURRENT (BEAGLEBONE-DEBUG) #1 r297561: Fri Apr  8 00:53:13 
BRT 2016

Welcome to FreeBSD!

Release Notes, Errata: https://www.FreeBSD.org/releases/
Security Advisories:   https://www.FreeBSD.org/security/
FreeBSD Handbook:      https://www.FreeBSD.org/handbook/
FreeBSD FAQ:           https://www.FreeBSD.org/faq/
Questions List: 
https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/
FreeBSD Forums:        https://forums.FreeBSD.org/

Documents installed with the system are in the /usr/local/share/doc/freebsd/
directory, or can be installed later with:  pkg install en-freebsd-doc
For other languages, replace "en" with a language code like de or fr.

Show the version of FreeBSD installed:  freebsd-version ; uname -a
Please include that output and any error messages when posting questions.
Introduction to manual pages:  man man
FreeBSD directory layout:      man hier

Edit /etc/motd to change this login announcement.
% su
Apr  8 05:10:25 beaglebone su: ota to root on /dev/ttyu0
root@beaglebone:/usr/home/ota # ping nostromo
PING nostromo (192.168.0.26): 56 data bytes
64 bytes from 192.168.0.26: icmp_seq=0 ttl=64 time=76.013 ms
64 bytes from 192.168.0.26: icmp_seq=1 ttl=64 time=2.554 ms
^C
--- nostromo ping statistics ---
2 packets transmitted, 2 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 2.554/39.284/76.013/36.730 ms
root@beaglebone:/usr/home/ota # pkg update
The package management tool is not yet installed on your system.
Do you want to fetch and install it now? [y/N]: y
Bootstrapping pkg from 
pkg+http://nostromo:8080/repo/101armv6-default/.latest, please wait...
^C
root@beaglebone:/usr/home/ota # ping nostromo
PING nostromo (192.168.0.26): 56 data bytes
^C
--- nostromo ping statistics ---
9 packets transmitted, 0 packets received, 100.0% packet loss
root@beaglebone:/usr/home/ota # cat /etc/rc.conf
hostname="beaglebone"
ifconfig_cpsw0="DHCP"
sshd_enable="YES"

# Nice if you have a network, else annoying.
#ntpd_enable="YES"
ntpd_sync_on_start="YES"

# Uncomment to disable common services (more memory)
#cron_enable="NO"
#syslogd_enable="NO"

sendmail_submit_enable="NO"
sendmail_outbound_enable="NO"
sendmail_msp_queue_enable="NO"
# On first boot, enlarge the root filesystem to fill the SD card
growfs_enable="YES"

wlans_urtwn0="wlan0"
ifconfig_wlan0="WPA SYNCDHCP -amsdu"

=====================================================================================================

The behavior is the same.

I did a test without the options -ff and -amsdu and get response after a 
lot of time:

=====================================================================================================

  ping nostromo
PING nostromo (192.168.0.26): 56 data bytes
¦64 bytes from 192.168.0.26: icmp_seq=0 ttl=64 time=29700.789 ms
64 bytes from 192.168.0.26: icmp_seq=1 ttl=64 time=28686.953 ms
64 bytes from 192.168.0.26: icmp_seq=2 ttl=64 time=27662.899 ms
64 bytes from 192.168.0.26: icmp_seq=3 ttl=64 time=26640.436 ms
64 bytes from 192.168.0.26: icmp_seq=4 ttl=64 time=25614.867 ms
64 bytes from 192.168.0.26: icmp_seq=5 ttl=64 time=24590.894 ms
64 bytes from 192.168.0.26: icmp_seq=6 ttl=64 time=23566.904 ms
64 bytes from 192.168.0.26: icmp_seq=7 ttl=64 time=22542.891 ms
64 bytes from 192.168.0.26: icmp_seq=8 ttl=64 time=21518.889 ms
64 bytes from 192.168.0.26: icmp_seq=9 ttl=64 time=20494.831 ms
64 bytes from 192.168.0.26: icmp_seq=10 ttl=64 time=19470.858 ms
64 bytes from 192.168.0.26: icmp_seq=11 ttl=64 time=18446.867 ms
64 bytes from 192.168.0.26: icmp_seq=12 ttl=64 time=17422.918 ms
64 bytes from 192.168.0.26: icmp_seq=13 ttl=64 time=16400.771 ms
64 bytes from 192.168.0.26: icmp_seq=14 ttl=64 time=15374.826 ms
64 bytes from 192.168.0.26: icmp_seq=15 ttl=64 time=14350.861 ms
64 bytes from 192.168.0.26: icmp_seq=16 ttl=64 time=13325.829 ms
64 bytes from 192.168.0.26: icmp_seq=17 ttl=64 time=12303.424 ms
64 bytes from 192.168.0.26: icmp_seq=18 ttl=64 time=11277.698 ms
64 bytes from 192.168.0.26: icmp_seq=19 ttl=64 time=10254.808 ms
64 bytes from 192.168.0.26: icmp_seq=20 ttl=64 time=9231.029 ms
64 bytes from 192.168.0.26: icmp_seq=21 ttl=64 time=8206.789 ms
64 bytes from 192.168.0.26: icmp_seq=22 ttl=64 time=7182.765 ms
64 bytes from 192.168.0.26: icmp_seq=23 ttl=64 time=6158.762 ms
64 bytes from 192.168.0.26: icmp_seq=24 ttl=64 time=5134.735 ms
64 bytes from 192.168.0.26: icmp_seq=25 ttl=64 time=4111.212 ms
64 bytes from 192.168.0.26: icmp_seq=26 ttl=64 time=3086.722 ms
64 bytes from 192.168.0.26: icmp_seq=27 ttl=64 time=2062.736 ms
64 bytes from 192.168.0.26: icmp_seq=28 ttl=64 time=1038.563 ms
64 bytes from 192.168.0.26: icmp_seq=29 ttl=64 time=14.707 ms
64 bytes from 192.168.0.26: icmp_seq=30 ttl=64 time=17.124 ms
64 bytes from 192.168.0.26: icmp_seq=31 ttl=64 time=11.297 ms
64 bytes from 192.168.0.26: icmp_seq=32 ttl=64 time=15.849 ms
64 bytes from 192.168.0.26: icmp_seq=33 ttl=64 time=38.727 ms
64 bytes from 192.168.0.26: icmp_seq=34 ttl=64 time=19.729 ms
64 bytes from 192.168.0.26: icmp_seq=35 ttl=64 time=7.052 ms


[]'s
-Otacilio

Em 08/04/2016 16:55, Adrian Chadd escreveu:
> hi,
>
> try 'ifconfig wlan0 -ff -amsdu' and try again
>
>
> -a
>
>
> On 8 April 2016 at 12:35, Otacílio <otacilio.neto@bsd.com.br> wrote:
>> Dears
>>
>> I'm testing the CURRENT version on a beaglebone black and have noted the
>> follow behavior. On revision 297561 the wifi adapter stops works after a pkg
>> update. I did the follow tests.
>> Using the version 296898 (OK behavior) and 297561 (wrong behavior):
>>
>> FreeBSD beaglebone 11.0-CURRENT FreeBSD 11.0-CURRENT #1 r296898M: Wed Mar 16
>> 23:52:02 BRT 2016
>> ota@nostromo:/root/crochet/work/obj/arm.armv6/usr/src/sys/BEAGLEBONE-DEBUG
>> arm
>>
>> ping nostromo ==> OK
>> pkg update       ==> OK
>> ping nostromo==> OK
>> network is OK
>>
>> I have tested using this follows adapters and on both the behavior is the
>> same and OK on 296898 :
>> urtwn0: <vendor 0x0bda product 0x8176, class 0/0, rev 2.00/2.00, addr 2> on
>> usbus1
>> urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
>>
>> urtwn0: <vendor 0x0bda product 0x8178, class 0/0, rev 2.00/2.00, addr 2> on
>> usbus1
>> urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R
>>
>>
>> After update to this version
>> FreeBSD beaglebone 11.0-CURRENT FreeBSD 11.0-CURRENT #1 r297561: Fri Apr  8
>> 00:53:13 BRT 2016
>> ota@nostromo:/root/crochet/work/obj/arm.armv6/usr/src/sys/BEAGLEBONE-DEBUG
>> arm
>>
>> And I did the same tests using the same adapters and the wifi stops work
>> after pkg update.
>>
>>
>> And a complete log of the test:
>>
>> Edit /etc/motd to change this login announcement.
>> % ping nostromo
>> PING nostromo (192.168.0.26): 56 data bytes
>> 64 bytes from 192.168.0.26: icmp_seq=0 ttl=64 time=98.318 ms
>> 64 bytes from 192.168.0.26: icmp_seq=1 ttl=64 time=3.679 ms
>> 64 bytes from 192.168.0.26: icmp_seq=2 ttl=64 time=58.809 ms
>> 64 bytes from 192.168.0.26: icmp_seq=3 ttl=64 time=5.464 ms
>> 64 bytes from 192.168.0.26: icmp_seq=4 ttl=64 time=10.979 ms
>> ^C
>> --- nostromo ping statistics ---
>> 5 packets transmitted, 5 packets received, 0.0% packet loss
>> round-trip min/avg/max/stddev = 3.679/35.450/98.318/37.431 ms
>> % su
>> pkg upApr  8 04:18:24 beaglebone su: ota to root on /dev/ttyu0
>> daroot@beaglebone:/usr/home/ota # pkg update
>> The package management tool is not yet installed on your system.
>> Do you want to fetch and install it now? [y/N]: y
>> Bootstrapping pkg from
>> pkg+http://nostromo:8080/repo/101armv6-default/.latest, please wait...
>> ^C
>> root@beaglebone:/usr/home/ota # ping nostromo
>> PING nostromo (192.168.0.26): 56 data bytes
>> ^C
>> --- nostromo ping statistics ---
>> 7 packets transmitted, 0 packets received, 100.0% packet loss
>> root@beaglebone:/usr/home/ota # uname -a
>> FreeBSD beaglebone 11.0-CURRENT FreeBSD 11.0-CURRENT #1 r297561: Fri Apr  8
>> 00:53:13 BRT 2016
>> ota@nostromo:/root/crochet/work/obj/arm.armv6/usr/src/sys/BEAGLEBONE-DEBUG
>> arm
>>
>> this log is for the follow adapter but for the next one the behavior is the
>> same
>>
>> urtwn0: <vendor 0x0bda product 0x8178, class 0/0, rev 2.00/2.00, addr 2> on
>> usbus1
>> urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R
>>
>> urtwn0: <vendor 0x0bda product 0x8176, class 0/0, rev 2.00/2.00, addr 2> on
>> usbus1
>> urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
>>
>>
>> Someone knows whats going on?
>>
>>
>> Thanks a lot
>> -Otacílio
>>
>>
>>
>> _______________________________________________
>> freebsd-current@freebsd.org mailing list
>> https://lists.freebsd.org/mailman/listinfo/freebsd-current
>> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?570812A5.1050600>