Date: Fri, 11 Oct 2002 01:12:54 -0700 From: "Firsto Lasto" <firstolasto@hotmail.com> To: mark@grondar.za Cc: freebsd-hackers@FreeBSD.ORG Subject: Re: PRNG not seeded - error in non-root ssh inside 4.6.2 jails... Message-ID: <F99Oeym8YhAkZLQEltP000037c6@hotmail.com>
next in thread | raw e-mail | index | archive | help
Ok, I did this, and got the exact same results - first it says that PRNG is not seeded, and then I chmod 0666 /dev/urandom and then it tells me "host key verification failed". So, just in case I also did the opposite - I left random alone and set urandom to 2,3 so it behaves like random ... and this was interesting, when I did this, it told me PRNG not seeded no matter what I set the permissions to - so at no point did I progress to "host key verification failed". Hope this helps - I hate to think that the single most used userland application does not function inside of jail (which is the case, it seems, at least in 4.6.2) > > > > > Do you mean recompile SSL using urandom instead of random ? > >Yes. > > > Would it be the exact same effect if I simply changed my /dev/random to > > major/minor 2,4 instead of 2,3 ? > >Yes. That would work. > > > It seems like that would be much easier... > >Indeed! > >M > > > > > Ok, I am not sure how I can do that though - I cannot successfully >run > > > > `rndcontrol -s X` inside a jail. > > > > > > > > On the other hand, I already have: > > > > > > > > rand_irqs="9 10 11 13 14" > > > > > > > > In my rc.conf on the underlying host machine, and have done several > > >boots > > > > with that in place. So presumably I should be seeded just fine, but >if > > >I am > > > > not, I cannot change that in the jail because it seems I cannot set >that > > >(I > > > > assume it is a sysctl issue). > > > > > > > > Willing to try whatever you can think of next :) > > > > > >Hokay. Can you grovel around inside OpenSSL (src/crypto/openssl/...) >and > > >find where the random device is read? If it is /dev/random, then change > > >that to /dev/urandom. > > > > > >See how that works. > > > > > >M > > > > > > > > > I can't seed it by banging on the keyboard - it is a headless >server > > >in > > > > >a > > > > > > rack thousands of miles from me :) > > > > > > > > > > > > Perhaps there is another way to do it ? > > > > > > > > > >Yes. > > > > > > > > > >You need to find sources of entropy in interrupts. Look at a > > > > >dmesg, and note which IRQ's your network device(s) and mass > > > > >storage controller(s) (both SCSI and ATA). Use any other > > > > >irq's that aren't too busy and may be somewhat random. > > > > >Staring at a 'systat 2 -vmstat' screen (right hand side) > > > > >may give some clues. > > > > > > > > > >Then use rndcontrol(8) to set up the seeding. There is a knob > > > > >in rc.conf to make this setting survive the next reboot. > > > > > > > > > >M > > > > > > > > > > > >Date: Thu, 03 Oct 2002 21:54:30 +0100 > > > > > > > > > > > > > > > Sorry, here is the rest: > > > > > > > > > > > > > > > > Here is the output of the `dd` command using urandom: > > > > > > > > > > > > > > > > dd if=/dev/urandom of=/dev/stdout bs=512 count=1 | hexdump >-C > > > > > > > > 1+0 records in > > > > > > > > 1+0 records out > > > > > > > > 00000000 a0 69 1a 7c 8f 32 e5 21 ae 7a 33 14 68 0b 8e a6 > > > > > > > > |.i.|.2.!.z3.h...| > > > > > > > > > > > > > >... etc. Looking good. > > > > > > > > > > > > > > > $ ls -l /dev/*rand* > > > > > > > > crw-r--r-- 1 root wheel 2, 3 Sep 3 21:46 /dev/random > > > > > > > > crw-r--r-- 1 root wheel 2, 4 Sep 3 21:46 >/dev/urandom > > > > > > > > > > > > > >Also good. > > > > > > > > > > > > > > > > > So then, as root I ran: `chmod 0666 /dev/stdout` and >then I > > >ran > > > > >your > > > > > > > > >`dd` > > > > > > > > > > command and got: > > > > > > > > > > > > > > > > > > > > $ dd if=/dev/random of=/dev/stdout bs=512 count=1 | >hexdump > > >-C > > > > > > > > > > 0+0 records in > > > > > > > > > > 0+0 records out > > > > > > > > > > 0 bytes transferred in 0.000036 secs (0 bytes/sec) > > > > > > > > > > > > > >Can you try a few of these while furiously abusing your >keyboard? > > > > > > >I'm trying to see if /dev/random can be persuaded to give _any_ > > > > > > >aoutput at all. > > > > > > > > > > > > > >Maybe do it on a vty instead of in X. > > > > > > > > > > > > > >M > > > > > > >-- > > > > > > >o Mark Murray > > > > > > >\_ > > > > > > >O.\_ Warning: this .sig is umop ap!sdn > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >_________________________________________________________________ > > > > > > Chat with friends online, try MSN Messenger: > > >http://messenger.msn.com > > > > > > > > > > >-- > > > > >o Mark Murray > > > > >\_ > > > > >O.\_ Warning: this .sig is umop ap!sdn > > > > > > > > > > > > > > > > > > > > _________________________________________________________________ > > > > Send and receive Hotmail on your mobile device: >http://mobile.msn.com > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > with "unsubscribe freebsd-hackers" in the body of the message > > >-- > > >o Mark Murray > > >\_ > > >O.\_ Warning: this .sig is umop ap!sdn > > > > > > > > > > _________________________________________________________________ > > Send and receive Hotmail on your mobile device: http://mobile.msn.com > > >-- >o Mark Murray >\_ >O.\_ Warning: this .sig is umop ap!sdn _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F99Oeym8YhAkZLQEltP000037c6>