Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 17 Mar 2010 07:24:26 -0400 (Eastern Daylight Time)
From:      Xihong Yin <xyin@gmx.com>
To:        freebsd-questions@freebsd.org
Subject:   Re: NDIS failed under 8.0, please help
Message-ID:  <alpine.WNT.2.00.1003170723520.1124@BUQ12-8384.ajf.abnn>
In-Reply-To: <alpine.BSF.2.00.1003162133080.1391@qryy.zlubzr.jrfgryy.pbz>
References:  <alpine.BSF.2.00.1003162133080.1391@qryy.zlubzr.jrfgryy.pbz>

next in thread | previous in thread | raw e-mail | index | archive | help
It is resolved by creating wlan0.

Xihong


On Tue, 16 Mar 2010, Xihong Yin wrote:

> The NDIS driver failed after I upgraded from 7.1 to 8.0 Stable, the NDIS
> driver was built successfully under 8.0 though.
>
> The wireless card is a Dell TrueMobile 1300 WLAN Mini-PCI Card. It works
> perfectly under 7.2.
>
> I run
>
> #ifconfig ndis0 up scan
>
> and got and error:
>
> ifconfig: unable to get scan results
>
> ifconfig ndis0 is
>
> ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
> 2290
> 	ether 00:90:4b:c7:f1:01
> 	media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
> 	status: no carrier
>
> uname -a is
>
> FreeBSD dell 8.0-STABLE FreeBSD 8.0-STABLE #0: Tue
> Mar 16 06:41:00 EDT 2010
> root@dell:/usr/obj/usr/src/sys/MY8KERNEL  i386
>
> dmesg is
>
> Copyright (c) 1992-2010 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 8.0-STABLE #0: Tue Mar 16 06:41:00 EDT 2010
>    root@dell:/usr/obj/usr/src/sys/MY8KERNEL i386
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Celeron(R) M processor         1.40GHz (1396.55-MHz 686-class 
> CPU)
>  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
>  Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
>  AMD Features=0x100000<NX>
> real memory  = 268435456 (256 MB)
> avail memory = 244703232 (233 MB)
> ACPI APIC Table: <DELL   CPi R  >
> ioapic0: Changing APIC ID to 1
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> acpi0: <DELL CPi R  > on motherboard
> acpi0: [ITHREAD]
> acpi0: reservation of 0, 9fc00 (3) failed
> acpi0: reservation of 100000, f6d3800 (3) failed
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> battery0: <ACPI Control Method Battery> on acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Power Button> on acpi0
> acpi_button1: <Sleep Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> vgapci0: <VGA-compatible display> port 0xeff8-0xefff mem 
> 0xdff00000-0xdff7ffff,0xc0000000-0xcfffffff,0xdfec0000-0xdfefffff irq 16 at 
> device 2.0 on pci0
> agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0
> agp0: detected 7932k stolen memory
> agp0: aperture size is 256M
> vgapci1: <VGA-compatible display> mem 0xdff80000-0xdfffffff at device 2.1 on 
> pci0
> hdac0: <Intel 82801F High Definition Audio Controller> mem 
> 0xdfebc000-0xdfebffff irq 16 at device 27.0 on pci0
> hdac0: HDA Driver Revision: 20100226_0142
> hdac0: [ITHREAD]
> pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> pci11: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0
> pci12: <ACPI PCI bus> on pcib2
> uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 
> 0xbf80-0xbf9f irq 16 at device 29.0 on pci0
> uhci0: [ITHREAD]
> usbus0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
> uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 
> 0xbf60-0xbf7f irq 17 at device 29.1 on pci0
> uhci1: [ITHREAD]
> usbus1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
> uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 
> 0xbf40-0xbf5f irq 18 at device 29.2 on pci0
> uhci2: [ITHREAD]
> usbus2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
> uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 
> 0xbf20-0xbf3f irq 19 at device 29.3 on pci0
> uhci3: [ITHREAD]
> usbus3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
> ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xb0000000-0xb00003ff 
> irq 16 at device 29.7 on pci0
> ehci0: [ITHREAD]
> usbus4: EHCI version 1.0
> usbus4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
> pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci2: <ACPI PCI bus> on pcib3
> bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xdfbfc000-0xdfbfdfff irq 18 at 
> device 0.0 on pci2
> miibus0: <MII bus> on bfe0
> bmtphy0: <BCM4401 10/100baseTX PHY> PHY 1 on miibus0
> bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> bfe0: Ethernet address: 00:14:22:90:52:ed
> bfe0: [ITHREAD]
> ndis0: <Dell TrueMobile 1300 WLAN Mini-PCI Card> mem 0xdfbfe000-0xdfbfffff 
> irq 17 at device 3.0 on pci2
> ndis0: [ITHREAD]
> ndis0: NDIS API version: 5.1
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH6 UDMA100 controller> port 
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 16 at device 31.1 on 
> pci0
> ata0: <ATA channel 0> on atapci0
> ata0: [ITHREAD]
> ata1: <ATA channel 1> on atapci0
> ata1: [ITHREAD]
> acpi_tz0: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on 
> acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: [ITHREAD]
> psm0: model Generic PS/2 mouse, device ID 0
> atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff pnpid 
> ORM0000 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ppc0: parallel port not found.
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> Timecounter "TSC" frequency 1396547279 Hz quality 800
> Timecounters tick every 1.000 msec
> ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based 
> forwarding disabled, default to accept, logging disabled
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 12Mbps Full Speed USB v1.0
> usbus3: 12Mbps Full Speed USB v1.0
> usbus4: 480Mbps High Speed USB v2.0
> ugen0.1: <Intel> at usbus0
> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen1.1: <Intel> at usbus1
> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen2.1: <Intel> at usbus2
> uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> ugen3.1: <Intel> at usbus3
> uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> ugen4.1: <Intel> at usbus4
> uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
> ad0: 38154MB <WDC WD400VE-75HDT1 11.07D11> at ata0-master UDMA100 acd0: CDRW 
> <SONY CD-RW/DVD-ROM CRX835E/KDKE> at ata0-slave UDMA33 hdac0: HDA Codec #0: 
> Sigmatel STAC9220
> hdac0: HDA Codec #1: Conexant (Unknown)
> pcm0: <HDA Sigmatel STAC9220 PCM #0 Analog> at cad 0 nid 1 on hdac0
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> uhub2: 2 ports with 2 removable, self powered
> uhub3: 2 ports with 2 removable, self powered
> GEOM: ad0s4: geometry does not match label (255h,63s != 16h,63s).
> Root mount waiting for: usbus4
> Root mount waiting for: usbus4
> Root mount waiting for: usbus4
> uhub4: 8 ports with 8 removable, self powered
> Trying to mount root from ufs:/dev/ad0s4a
> drm0: <Intel i915GM> on vgapci0
> vgapci0: child drm0 requested pci_enable_busmaster
> info: [drm] AGP at 0xc0000000 256MB
> info: [drm] Initialized i915 1.6.0 20080730
> drm0: [ITHREAD]
> drm0: [ITHREAD]
>
> Please help!
>
> Thanks,
> Xihong
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.WNT.2.00.1003170723520.1124>