Date: Fri, 8 Mar 1996 16:39:14 -0600 From: Jim Lowe <james@miller.cs.uwm.edu> To: current@FreeBSD.ORG Subject: NCR disk controller, hp disk Message-ID: <199603082239.QAA13075@miller.cs.uwm.edu>
next in thread | raw e-mail | index | archive | help
I have an NCR 825 PCI disk controller. I just attached a second disk to the controller and am trying to access it. The second disk works just fine under dos, but not freebsd-current. I am getting the following errors: sd1(ncr0:1:0): ABORTED COMMAND asc:4e,0 Overlapped commands attempted , retries:4 sd1(ncr0:1:0): ABORTED COMMAND asc:4e,0 Overlapped commands attempted , retries:3 sd1(ncr0:1:0): ABORTED COMMAND asc:4e,0 Overlapped commands attempted , retries:2 sd1(ncr0:1:0): ABORTED COMMAND asc:4e,0 Overlapped commands attempted , retries:1 sd1(ncr0:1:0): ABORTED COMMAND asc:4e,0 Overlapped commands attempted , FAILURE sd1: error reading primary partition table reading fsbn 0 (sd1 bn 0; cn 0 tn 0 s n 0) Any clues as to what to try/do next? The boot up information follows. I am not sure why I am getting the probe0(ncr0:9:0) errors either. Termination? Thanks for any help, -Jim -------------------------------------------------------- CPU: Pentium (99.46-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x525 Stepping=5 Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> real memory = 33554432 (32768K bytes) avail memory = 30138368 (29432K bytes) DEVFS: ready for devices Probing for devices on PCI bus 0: chip0 <Intel 82437 (Triton) PCI cache memory controller> rev 2 on pci0:0 chip1 <Intel 82371 (Triton) PCI-ISA bridge> rev 2 on pci0:7 pci0:7: Intel Corporation, device=0x1230, class=storage (ide) [no driver assigned] meteor0 <Philips SAA 7116> rev 0 int a irq 12 on pci0:9 meteor0: <Philips SAA 7196> rev 0x1 ncr0 <ncr 53c825 wide scsi> rev 2 int a irq 10 on pci0:10 (ncr0:0:0): "HP C2247-300 0BA4" type 0 fixed SCSI 2 sd0(ncr0:0:0): Direct-Access sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. 1003MB (2054864 512 byte sectors) sd0(ncr0:0:0): with 2051 cyls, 13 heads, and an average 77 sectors/track (ncr0:1:0): "HP C3724S 5153" type 0 fixed SCSI 2 sd1(ncr0:1:0): Direct-Access sd1(ncr0:1:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. 1149MB (2354660 512 byte sectors) sd1(ncr0:1:0): with 3703 cyls, 5 heads, and an average 127 sectors/track (ncr0:2:0): "TOSHIBA CD-ROM XM-3401TA 2873" type 5 removable SCSI 2 cd0(ncr0:2:0): CD-ROM cd0(ncr0:2:0): 250ns (4 Mb/sec) offset 8. cd0(ncr0:2:0): NOT READY asc:3a,0 Medium not present can't get the size probe0(ncr0:9:0): scsi_cmd probe0(ncr0:9:0): scsi_done (ncr0:9:0): command: 0,0,0,0,0,0-[0 bytes] probe0(ncr0:9:0): scsi_done (ncr0:9:0): command: 0,0,0,0,0,0-[0 bytes] probe0(ncr0:9:0): scsi_done (ncr0:9:0): command: 0,0,0,0,0,0-[0 bytes] probe0(ncr0:9:0): scsi_cmd probe0(ncr0:9:0): scsi_done (ncr0:9:0): command: 12,0,0,0,2c,0-[44 bytes] ------------------------------ 000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 016: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 032: 00 00 00 00 00 00 00 00 00 00 00 00 ------------------------------ probe0(ncr0:9:0): scsi_done (ncr0:9:0): command: 12,0,0,0,2c,0-[44 bytes] ------------------------------ 000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 016: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 032: 00 00 00 00 00 00 00 00 00 00 00 00 ------------------------------ probe0(ncr0:9:0): scsi_done (ncr0:9:0): command: 12,0,0,0,2c,0-[44 bytes] ------------------------------ 000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 016: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 032: 00 00 00 00 00 00 00 00 00 00 00 00 ------------------------------ de0 <Digital DC21140 Fast Ethernet> rev 17 int a irq 11 on pci0:11 de0: DC21140 [10-100Mb/s] pass 1.1 Ethernet address 00:00:c0:b3:d0:9a de0: enabling 100baseTX UTP port vga0 <Display device> rev 0 on pci0:12
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199603082239.QAA13075>