Date: Fri, 18 Oct 2002 11:18:45 +0300 From: "Petri Helenius" <pete@he.iki.fi> To: "Jim McGrath" <jimmcgra@bellatlantic.net>, "Luigi Rizzo" <rizzo@icir.org> Cc: "Lars Eggert" <larse@ISI.EDU>, <freebsd-net@FreeBSD.ORG> Subject: Re: ENOBUFS Message-ID: <0cf301c2767e$fb192080$8c2a40c1@PHE> References: <NDBBKKEELKBCJJBEGDECCEHHCGAA.jimmcgra@bellatlantic.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Where could I get the errata sheet? Could the numbers be packet thresholds? 28 and 128 packets respectively? Anything else that can be done? Does PCI width/speed affect the amount of time spent in the kernel interrupt or are the PCI transfers asynchronous? Pete ----- Original Message ----- From: "Jim McGrath" <jimmcgra@bellatlantic.net> To: "Luigi Rizzo" <rizzo@icir.org>; "Petri Helenius" <pete@he.iki.fi> Cc: "Lars Eggert" <larse@ISI.EDU>; <freebsd-net@FreeBSD.ORG> Sent: Friday, October 18, 2002 7:49 AM Subject: RE: ENOBUFS > Careful here. Read the errata sheet!! I do not believe the em driver uses > these parameters, and possibly for a good reason. > > Jim > > > -----Original Message----- > > From: owner-freebsd-net@FreeBSD.ORG > > [mailto:owner-freebsd-net@FreeBSD.ORG]On Behalf Of Luigi Rizzo > > Sent: Thursday, October 17, 2002 11:12 PM > > To: Petri Helenius > > Cc: Lars Eggert; freebsd-net@FreeBSD.ORG > > Subject: Re: ENOBUFS > > > > > > On Thu, Oct 17, 2002 at 11:55:24PM +0300, Petri Helenius wrote: > > ... > > > I seem to get about 5-6 packets on an interrupt. Is this tunable? At > > > > just reading the source code, yes, it appears that the card has > > support for delayed rx/tx interrupts -- see RIDV and TIDV definitions > > and usage in sys/dev/em/* . I don't know in what units are the values > > (28 and 128, respectively), but it does appear that tx interrupts are > > delayed a bit more than rx interrupts. > > > > They are not user-configurable at the moment though, you need to rebuild > > the kernel. > > > > cheers > > luigi > > > > > 50kpps the card generates 10k interrupts a second. Sending generates > > > way less. This is about 300Mbps so with the average packet size of > > > 750 there should be room for more packets on the interface queue > > > before needing to service an interrupt? > > > > > > What´s the way to access kernel adapter-structure? Is there an utility > > > that can view the values there? > > > > > > > Pete > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-net" in the body of the message > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0cf301c2767e$fb192080$8c2a40c1>