Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 14 Apr 1999 16:46:56 +0100
From:      Richard Smith <rsmith@trltech.co.uk>
To:        "FreeBSD, Mobile" <freebsd-mobile@freebsd.org>
Subject:   Cirrus Logic 6729/6730 port address?
Message-ID:  <3714B870.B1AC213D@trltech.co.uk>

next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------17AA852D3B0A270FEDBB2CED
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hello again,

After advice from Chung-Kie Tung, I have installed the PAO3-beta
package. However, my controller does not appear to be at the default
port addresses or at the 0xfcfc port address that was successful for
Chung-Kie Tung.

I have attached my dmesg.boot file in the hope that it may help to
determine where I am likely to find the controller. Any other
suggestions also welcome :)

Thanks,
Richard.
--------------17AA852D3B0A270FEDBB2CED
Content-Type: text/plain; charset=us-ascii; name="dmesg.boot"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="dmesg.boot"

Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 3.1-RELEASE #4: Tue Apr 13 16:36:48 BST 1999
    richard@notebook.wan:/usr/src/sys/compile/NOTEBOOK
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P54C (120.27-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x52c  Stepping=12
  Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory  = 41943040 (40960K bytes)
avail memory = 38129664 (37236K bytes)
Preloaded elf kernel "kernel" at 0xf02b7000.
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=1060 device=e891)> rev 0xb0 on pci0.0.0
vga0: <Chips & Technologies model 00dc VGA-compatible display device> rev 0x00 on pci0.17.0
chip1: <PCI to ISA bridge (vendor=1060 device=e886)> rev 0xb2 on pci0.18.0
ide_pci0: <PCI IDE controller (busmaster capable)> rev 0x10 on pci0.18.1
pcic0: <Cirrus Logic PD6729/6730 PC-card Bridge> rev 0xfe int a irq 255 on pci0.23.0
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1 not found at 0x2f8
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <TOSHIBA MK1926FCV>
wd0: 777MB (1591632 sectors), 1579 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <TOSHIBA CD-ROM XM-1302B/2865>, removable, intr, iordis
acd0: drive speed 689KB/sec, 128KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
ppc0 at 0x378 irq 7 on isa
ppc0: SMC FDC37C665GT chipset (PS2/NIBBLE) in COMPATIBLE mode
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
ep0 not found at 0x300
sn0 not found at 0x300
wlp0 not found at 0x300
cnw0 not found at 0x300
pcic0 not found at 0x3e0
pcic0 not found at 0x3e4
pcic1 not found at 0x3e2
pcic1 not found at 0x3e4
pcic0 not found at 0xfcfc
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
apm0 on isa
apm: found APM BIOS version 1.1
joy0 at 0x201 on isa
joy0: joystick
Intel Pentium detected, installing workaround for F00F bug
changing root device to wd0s1a

--------------17AA852D3B0A270FEDBB2CED--



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3714B870.B1AC213D>