Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 10 Dec 1998 12:31:21 -0600
From:      Peter Johnson <locke@mcs.net>
To:        moore@wolfenet.com
Cc:        freebsd-current@FreeBSD.ORG
Subject:   Re: NTIMECOUNTER and calcru...
Message-ID:  <3.0.5.32.19981210123121.009fd8d0@popmail.mcs.net>

next in thread | raw e-mail | index | archive | help
Get XFree 3.3.3; the patch for the XF86_3DLabs server is in it (at least
the most recent releases).
If your 3.3.3 doesn't include the fix, I have the patch if you need it
(tiny little thing).

Regards,
Peter Johnson
locke@mcs.net

At 10:03 AM 12/10/98 -0800, you wrote:
>I had been following the negative calcru discussion with moderate
>interest until I got a new machine that exhibits the "calcru: negative
>time" problem.  The machine is a 400 Mhz Dell with a Diamond Fire GL
>1000 Pro video card; this sounds a lot like a machine on which the
>problem had been seen, so I had high hopes for the NTIMECOUNTER fix.
>However, it doesn't seem to make a difference, even with NTIMECOUNTER
>set to 2000.  For testing I've been doing "sysctl -w
>kern.timecounter.method=1" in single user mode before going multi-user
>and starting X.  As soon as X comes up the calcru messages start
>spewing.
>
>Is there hope for this machine and video card?  Here's the
>configuration file and dmesg.
>
>Thanks,
>Tim
>
>#
># GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
>#
># For more information read the handbook part System Administration -> 
># Configuring the FreeBSD Kernel -> The Configuration File. 
># The handbook is available in /usr/share/doc/handbook or online as
># latest version from the FreeBSD World Wide Web server 
># <URL:http://www.FreeBSD.ORG/>;
>#
># An exhaustive list of options and more detailed explanations of the 
># device lines is present in the ./LINT configuration file. If you are 
># in doubt as to the purpose or necessity of a line, check first in LINT.
>#
>#	$Id: GENERIC,v 1.125 1998/10/16 01:30:11 obrien Exp $
>
>machine		"i386"
>cpu		"I686_CPU"
>ident		BELUSHI	
>maxusers	32
>
>options		MATH_EMULATE		#Support for x87 emulation
>options		INET			#InterNETworking
>options		FFS			#Berkeley Fast Filesystem
>options		FFS_ROOT		#FFS usable as root device [keep this!]
>options		MFS			#Memory Filesystem
>options		MFS_ROOT		#MFS usable as root device, "MFS" req'ed
>options		NFS			#Network Filesystem
>options		NFS_ROOT		#NFS usable as root device, "NFS" req'ed
>options		MSDOSFS			#MSDOS Filesystem
>options		"CD9660"		#ISO 9660 Filesystem
>options		"CD9660_ROOT"		#CD-ROM usable as root. "CD9660" req'ed
>options		PROCFS			#Process filesystem
>options		"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
>options		SCSI_DELAY=15000	#Be pessimistic about Joe SCSI device
>options		UCONSOLE		#Allow users to grab the console
>options		FAILSAFE		#Be conservative
>options		USERCONFIG		#boot -c editor
>options		VISUAL_USERCONFIG	#visual boot -c editor
>
>config		kernel	root on wd0
>
>controller	isa0
>controller	eisa0
>controller	pci0
>
>controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2
>disk		fd0	at fdc0 drive 0
>disk		fd1	at fdc0 drive 1
># Unless you know very well what you're doing, leave ft0 at drive 2, or
># remove the line entirely if you don't need it.  Trying to configure
># it on another unit might cause surprises, see PR kern/7176.
>#tape		ft0	at fdc0 drive 2
>
>options		"CMD640"	# work around CMD640 chip deficiency
>controller	wdc0	at isa? port "IO_WD1" bio irq 14
>disk		wd0	at wdc0 drive 0
>disk		wd1	at wdc0 drive 1
>
>controller	wdc1	at isa? port "IO_WD2" bio irq 15
>disk		wd2	at wdc1 drive 0
>disk		wd3	at wdc1 drive 1
>
>options		ATAPI		#Enable ATAPI support for IDE bus
>options		ATAPI_STATIC	#Don't do it as an LKM
>device		wcd0		#IDE CD-ROM
>device		wfd0		#IDE Floppy (e.g. LS-120)
>
># A single entry for any of these controllers (ncr, ahb, ahc, amd) is
># sufficient for any number of installed devices.
>controller	ahb0
>controller	ahc0
>
># This controller offers a number of configuration options, too many to
># document here  - see the LINT file in this directory and look up the
># dpt0 entry there for much fuller documentation on this.
>
>controller	scbus0
>
>device		da0
>
>device		sa0
>
>device		pass0
>
>device		cd0	#Only need one of these, the code dynamically grows
>
>#
># dano - commented out wt0, mcd0, matcd0, scd0
>#
>#device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
>#device		mcd0	at isa? port 0x300 bio irq 10 vector mcdintr
>
>#controller	matcd0	at isa? port 0x230 bio
>
>#device		scd0	at isa? port 0x230 bio
>
># syscons is the default console driver, resembling an SCO console
>device		sc0	at isa? port "IO_KBD" conflicts tty irq 1 vector scintr
># Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
>#device		vt0	at isa? port "IO_KBD" conflicts tty irq 1 vector pcrint
>#options		XSERVER			# support for X server
>#options		FAT_CURSOR		# start with block cursor
># If you have a ThinkPAD, uncomment this along with the rest of the PCVT
lines
>#options		PCVT_SCANSET=2		# IBM keyboards are non-std
>
>device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr
>
>#
># Laptop support (see LINT for more options)
>#
>device		apm0    at isa?	disable	flags 0x31 # Advanced Power Management
>
># PCCARD (PCMCIA) support
>#controller	card0
>#device		pcic0	at card?
>#device		pcic1	at card?
>
>device		sio0	at isa? port "IO_COM1" flags 0x10 tty irq 4 vector siointr
>device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
>device		sio2	at isa? disable port "IO_COM3" tty irq 5 vector siointr
>device		sio3	at isa? disable port "IO_COM4" tty irq 9 vector siointr
>
>device		lpt0	at isa? port? tty irq 7 vector lptintr
>
>device		psm0	at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr
>
># Order is important here due to intrusive probes, do *not* alphabetize
># this list of network interfaces until the probes have been fixed.
># Right now it appears that the ie0 must be probed before ep0. See
># revision 1.20 of this file.
>device xl0
>
>pseudo-device	loop
>pseudo-device	ether
>pseudo-device	sl	1
>pseudo-device	ppp	1
>pseudo-device	tun	1
>pseudo-device	pty	16
>pseudo-device	gzip		# Exec gzipped a.out's
>
># KTRACE enables the system-call tracing facility ktrace(2).
># This adds 4 KB bloat to your kernel, and slightly increases
># the costs of each syscall.
>options		KTRACE		#kernel tracing
>
># This provides support for System V shared memory.
>#
>options		SYSVSHM
>
>#  The `bpfilter' pseudo-device enables the Berkeley Packet Filter.  Be
>#  aware of the legal and administrative consequences of enabling this
>#  option.  The number of devices determines the maximum number of
>#  simultaneous BPF clients programs runnable.
>pseudo-device	bpfilter	4	#Berkeley packet filter
>
># These are attempts to get around the "calcru negative" problems which
seem to
># be caused by XFree86 and the Diamond FireGL video card.
>
>options		NTIMECOUNTER=2000
>options		"MSGBUF_SIZE=40960"
>
>Copyright (c) 1992-1998 FreeBSD Inc.
>Copyright (c) 1982, 1986, 1989, 1991, 1993
>	The Regents of the University of California. All rights reserved.
>FreeBSD 3.0-CURRENT #8: Wed Dec  9 09:32:15 PST 1998
>    tmoore@roscoe.mobile.cravegames.com:/usr/src/sys/compile/BELUSHI
>Calibrating clock(s) ... TSC clock: 398797485 Hz, i8254 clock: 1193253 Hz
>CLK_USE_I8254_CALIBRATION not specified - using default frequency
>Timecounter "i8254"  frequency 1193182 Hz
>CLK_USE_TSC_CALIBRATION not specified - using old calibration method
>CPU: Pentium II (quarter-micron) (398.78-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0x652  Stepping=2
>
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,<b24>>
>real memory  = 134217728 (131072K bytes)
>Physical memory chunk(s):
>0x00001000 - 0x0009efff, 647168 bytes (158 pages)
>0x002a4000 - 0x07ff5fff, 131407872 bytes (32082 pages)
>config> quit
>avail memory = 127598592 (124608K bytes)
>Found BIOS32 Service Directory header at 0xf00ffe80
>Entry = 0xffe90 (0xf00ffe90)  Rev = 0  Len = 1
>PCI BIOS entry at 0xca9e
>SMIBIOS header at 0xf00fb160
>Version 2.2
>Table at 0xfb180, 84 entries, 2922 bytes, largest entry 179 bytes
>DMI header at 0xf00fb170
>Version 2.2
>Table at 0xfb180, 84 entries, 2922 bytes
>Other BIOS signatures found:
>ACPI: 000fdf30
>$PnP: 000fe2d0
>Preloaded elf kernel "kern.new" at 0xf0297000.
>Math emulator present
>pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000058
>pci_open(1a):	mode1res=0x80000000 (0x80000000)
>pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=71908086)
>Probing for devices on PCI bus 0:
>found->	vendor=0x8086, dev=0x7190, revid=0x02
>	class=06-00-00, hdrtype=0x00, mfdev=0
>	subordinatebus=0 	secondarybus=0
>	map[0]: type 3, range 32, base f0000000, size 26
>chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0
>found->	vendor=0x8086, dev=0x7191, revid=0x02
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	subordinatebus=1 	secondarybus=1
>chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0
>found->	vendor=0x8086, dev=0x7110, revid=0x02
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	subordinatebus=0 	secondarybus=0
>chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
>found->	vendor=0x8086, dev=0x7111, revid=0x01
>	class=01-01-80, hdrtype=0x00, mfdev=0
>	subordinatebus=0 	secondarybus=0
>	map[0]: type 4, range 32, base 0000ffa0, size  4
>ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
>intel_piix_status: primary master/slave sample = 5, master/slave recovery = 4
>intel_piix_status: primary master fastDMAonly disabled, pre/post disabled,
>intel_piix_status:  IORDY sampling disabled,
>intel_piix_status:  fast PIO disabled
>intel_piix_status: primary master/slave sample = 5, master/slave recovery = 4
>intel_piix_status: primary slave fastDMAonly disabled, pre/post disabled,
>intel_piix_status:  IORDY sampling disabled,
>intel_piix_status:  fast PIO disabled
>ide_pci: busmaster 0 status: 04 from port: 0000ffa2
>intel_piix_status: secondary master/slave sample = 3, master/slave
recovery = 1
>intel_piix_status: secondary master fastDMAonly disabled, pre/post disabled,
>intel_piix_status:  IORDY sampling enabled,
>intel_piix_status:  fast PIO enabled
>intel_piix_status: secondary master/slave sample = 3, master/slave
recovery = 1
>intel_piix_status: secondary slave fastDMAonly disabled, pre/post disabled,
>intel_piix_status:  IORDY sampling disabled,
>intel_piix_status:  fast PIO disabled
>ide_pci: busmaster 1 status: 20 from port: 0000ffaa
>ide_pci: ide1:0 has been configured for DMA by BIOS
>found->	vendor=0x8086, dev=0x7112, revid=0x01
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	subordinatebus=0 	secondarybus=0
>	intpin=d, irq=14
>	map[0]: type 4, range 32, base 0000dce0, size  5
>found->	vendor=0x8086, dev=0x7113, revid=0x02
>	class=06-80-00, hdrtype=0x00, mfdev=0
>	subordinatebus=0 	secondarybus=0
>chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
>found->	vendor=0x10b7, dev=0x9055, revid=0x00
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	subordinatebus=0 	secondarybus=0
>	intpin=a, irq=14
>	map[0]: type 4, range 32, base 0000dc00, size  7
>	map[1]: type 1, range 32, base fe000000, size  7
>xl0: <3Com 3c905B Fast Etherlink XL 10/100BaseTX> rev 0x00 int a irq 14 on
pci0.17.0
>xl0: Ethernet address: 00:c0:4f:72:ed:56
>xl0: media options word: a
>xl0: probing for a PHY
>xl0: checking address: 0
>xl0: checking address: 1
>xl0: checking address: 2
>xl0: checking address: 3
>xl0: checking address: 4
>xl0: checking address: 5
>xl0: checking address: 6
>xl0: checking address: 7
>xl0: checking address: 8
>xl0: checking address: 9
>xl0: checking address: 10
>xl0: checking address: 11
>xl0: checking address: 12
>xl0: checking address: 13
>xl0: checking address: 14
>xl0: checking address: 15
>xl0: checking address: 16
>xl0: checking address: 17
>xl0: checking address: 18
>xl0: checking address: 19
>xl0: checking address: 20
>xl0: checking address: 21
>xl0: checking address: 22
>xl0: checking address: 23
>xl0: checking address: 24
>xl0: found PHY at address 24, vendor id: 0 device id: 0
>xl0: PHY type: <MII-compliant physical interface>
>xl0: found 10baseT
>xl0: found 100baseTX
>xl0: autoneg complete, link status good (full-duplex, 100Mbps)
>bpf: xl0 attached
>found->	vendor=0x1011, dev=0x0024, revid=0x03
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	subordinatebus=2 	secondarybus=2
>chip4: <PCI to PCI bridge (vendor=1011 device=0024)> rev 0x03 on pci0.19.0
>Probing for devices on PCI bus 1:
>found->	vendor=0x104c, dev=0x3d07, revid=0x01
>	class=03-00-00, hdrtype=0x00, mfdev=0
>	subordinatebus=0 	secondarybus=0
>	intpin=a, irq=11
>	map[0]: type 1, range 32, base fcfe0000, size 17
>	map[1]: type 1, range 32, base fc000000, size 23
>	map[2]: type 1, range 32, base fb800000, size 23
>vga0: <VGA-compatible display device> rev 0x01 int a irq 11 on pci1.0.0
>Probing for devices on PCI bus 2:
>found->	vendor=0x9005, dev=0x001f, revid=0x00
>	class=01-00-00, hdrtype=0x00, mfdev=0
>	subordinatebus=0 	secondarybus=0
>	intpin=a, irq=10
>	map[0]: type 4, range 32, base 0000ec00, size  8
>	map[1]: type 1, range 64, base f9fff000, size 12
>	map[2]: type 0, range  0, base 00000000, size  0
>ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 10 on
pci2.10.0
>ahc0: Reading SEEPROM...done.
>ahc0: BIOS eeprom not present
>ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
>ahc0: Resetting Channel A
>ahc0: Downloading Sequencer Program... 391 instructions downloaded
>found->	vendor=0x9004, dev=0x8078, revid=0x01
>	class=01-00-00, hdrtype=0x00, mfdev=0
>	subordinatebus=0 	secondarybus=0
>	intpin=a, irq=10
>	map[0]: type 4, range 32, base 0000e800, size  8
>	map[1]: type 1, range 32, base f9ffe000, size 12
>ahc1: <Adaptec aic7880 Ultra SCSI adapter> rev 0x01 int a irq 10 on pci2.14.0
>	using shared irq10.
>ahc1: Reading SEEPROM...done.
>ahc1: internal 50 cable not present, internal 68 cable not present
>ahc1: external cable not present
>ahc1: BIOS eeprom is present
>ahc1: High byte termination Enabled
>ahc1: Low byte termination Enabled
>ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
>ahc1: Resetting Channel A
>ahc1: Downloading Sequencer Program... 411 instructions downloaded
>Probing for devices on the ISA bus:
>video: RTC equip. code:0x03, DCC code:0x09
>video: CRTC:0x3d4, video option:0x60, rows:80, cols:25, font height:16
>video: param table EGA/VGA:0, CGA/MDA:0
>video: rows_offset:1
>video#0: adapter type:VGA (5), flags:0x7f, CRTC:0x3d4
>video#0: init mode:24, bios mode:3, current mode:24
>video#0: window:0xf00b8000 size:32k gran:32k, buf:0xf0000000 size:0k
>video#0: mode:24, flags:0x1 T 80x25, font:8x16, win:0xb8000
>video#0: mode:32, flags:0x1 T 80x30, font:8x16, win:0xb8000
>video#0: mode:30, flags:0x1 T 80x50, font:8x8, win:0xb8000
>video#0: mode:34, flags:0x1 T 80x60, font:8x8, win:0xb8000
>video#0: WARNING: video mode switching is not fully supported on this adapter
>VGA parameters upon power-up
>50 18 10 00 00 08 03 00 02 6f 5f 4f 50 82 55 81 
>bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
>VGA parameters in BIOS for mode 24
>50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
>bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
>EGA/VGA parameters to be used for mode 24
>50 18 10 00 00 08 03 00 02 6f 5f 4f 50 82 55 81 
>bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
>sc0: the current keyboard controller command byte 0065
>kbdio: DIAGNOSE status:0055
>kbdio: TEST_KBD_PORT status:0000
>kbdio: RESET_KBD return code:00fa
>kbdio: RESET_KBD status:00aa
>sc0: keyboard device ID: ab41
>sc0 at 0x60-0x6f irq 1 on motherboard
>sc0: VGA color <16 virtual consoles, flags=0x0>
>sio0: irq maps: 0x1 0x11 0x1 0x1
>sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
>sio0: type 16550A
>sio1: irq maps: 0x1 0x9 0x1 0x1
>sio1 at 0x2f8-0x2ff irq 3 on isa
>sio1: type 16550A
>sio2: disabled, not probed.
>sio3: disabled, not probed.
>lpt0 at 0x378-0x37f irq 7 on isa
>lpt0: Interrupt-driven port
>lp0: TCP/IP capable interface
>bpf: lp0 attached
>psm0: current command byte:0065
>kbdio: TEST_AUX_PORT status:0000
>kbdio: RESET_AUX return code:00fa
>kbdio: RESET_AUX status:00aa
>kbdio: RESET_AUX ID:0000
>psm: status 00 02 64
>psm: status 90 03 3c
>psm: status 90 03 3c
>psm: status 90 03 3c
>psm: status 00 00 28
>psm: data 08 00 00
>psm: data 08 00 00
>psm: status 00 02 64
>psm0 at 0x60-0x64 irq 12 on motherboard
>psm0: model Generic PS/2 mouse, device ID 0, 3 buttons
>psm0: config:00000000, flags:00000000, packet size:3
>psm0: syncmask:c0, syncbits:00
>fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
>fdc0: FIFO enabled, 8 bytes threshold
>fd0: 1.44MB 3.5in
>wdc0 not found at 0x1f0
>wdc1 at 0x170-0x177 irq 15 on isa
>wdc1: unit 0 (atapi): <NEC                 CD-ROM DRIVE:28C/3.02>,
removable, dma, iordy
>wcd0: 2412/5512KB/sec, 128KB cache, audio play, 256 volume levels,
ejectable tray
>wcd0: no disc inside, unlocked
>npx0 on motherboard
>npx0: INT 16 interface
>apm0: disabled, not probed.
>imasks: bio c0088040, tty c007509a, net c007509a
>BIOS Geometries:
> 0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
> 1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
> 2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
> 3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
> 4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
> 5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
> 6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
> 7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
> 0 accounted for
>Device configuration finished.
>bpf: tun0 attached
>bpf: sl0 attached
>bpf: ppp0 attached
>new masks: bio c0088040, tty c007509a, net c007509a
>bpf: lo0 attached
>Waiting 15 seconds for SCSI devices to settle
>(noperiph:ahc0:0:X:X): SCSI bus reset delivered. 0 SCBs aborted.
>(noperiph:ahc1:0:X:X): SCSI bus reset delivered. 0 SCBs aborted.
>ahc0: Selection Timeout on A:1. 1 SCBs aborted
>ahc1: Selection Timeout on A:0. 1 SCBs aborted
>ahc0: Selection Timeout on A:2. 1 SCBs aborted
>ahc1: Selection Timeout on A:1. 1 SCBs aborted
>ahc0: Selection Timeout on A:3. 1 SCBs aborted
>ahc1: Selection Timeout on A:2. 1 SCBs aborted
>ahc0: Selection Timeout on A:4. 1 SCBs aborted
>ahc1: Selection Timeout on A:3. 1 SCBs aborted
>ahc0: Selection Timeout on A:5. 1 SCBs aborted
>ahc1: Selection Timeout on A:4. 1 SCBs aborted
>ahc0: Selection Timeout on A:6. 1 SCBs aborted
>ahc1: Selection Timeout on A:5. 1 SCBs aborted
>ahc0: Selection Timeout on A:8. 1 SCBs aborted
>ahc1: Selection Timeout on A:6. 1 SCBs aborted
>ahc0: Selection Timeout on A:9. 1 SCBs aborted
>ahc1: Selection Timeout on A:8. 1 SCBs aborted
>ahc0: Selection Timeout on A:10. 1 SCBs aborted
>ahc1: Selection Timeout on A:9. 1 SCBs aborted
>ahc0: Selection Timeout on A:11. 1 SCBs aborted
>ahc1: Selection Timeout on A:10. 1 SCBs aborted
>ahc0: Selection Timeout on A:12. 1 SCBs aborted
>ahc1: Selection Timeout on A:11. 1 SCBs aborted
>ahc0: Selection Timeout on A:13. 1 SCBs aborted
>ahc1: Selection Timeout on A:12. 1 SCBs aborted
>ahc0: Selection Timeout on A:14. 1 SCBs aborted
>ahc1: Selection Timeout on A:13. 1 SCBs aborted
>ahc0: Selection Timeout on A:15. 1 SCBs aborted
>ahc0: target 0 using 16bit transfers
>ahc0: target 0 synchronous at 40.0MHz, offset = 0xf
>ahc1: Selection Timeout on A:14. 1 SCBs aborted
>ahc1: Selection Timeout on A:15. 1 SCBs aborted
>pass0 at ahc0 bus 0 target 0 lun 0
>pass0: <SEAGATE ST39102LW 0004> Fixed Direct Access SCSI2 device 
>pass0: Serial Number LJ587842000019141CSZ
>pass0: 80.0MB/s transfers (40.0MHz, offset 15, 16bit), Tagged Queueing
Enabled
>da0 at ahc0 bus 0 target 0 lun 0
>da0: <SEAGATE ST39102LW 0004> Fixed Direct Access SCSI2 device 
>da0: Serial Number LJ587842000019141CSZ
>da0: 80.0MB/s transfers (40.0MHz, offset 15, 16bit), Tagged Queueing Enabled
>da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
>Considering MFS root f/s.
>No MFS image available as root f/s.
>Considering FFS root f/s.
>changing root device to da0s4a
>da0s1: type 0x6, start 63, end = 4192964, size 4192902 : OK
>da0s2: type 0x82, start 4192965, end = 4289354, size 96390 : OK
>da0s3: type 0x83, start 4289355, end = 11454344, size 7164990 : OK
>da0s4: type 0xa5, start 11454345, end = 17767889, size 6313545 : OK
>
>To Unsubscribe: send mail to majordomo@FreeBSD.org
>with "unsubscribe freebsd-current" in the body of the message
>
>
-------------------------------------
Peter Johnson
-------------------------------------
locke@mcs.net
http://locke.home.ml.org
PGP Keys available from above address.
-------------------------------------
Freelance C/C++/Java/Pascal/Asm programmer
 for DJGPP, Borland, and Watcom compilers
Member of BiLogic demo group
-> http://BiLogic.home.ml.org/
-------------------------------------

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.5.32.19981210123121.009fd8d0>