Date: Mon, 01 Sep 2003 17:49:53 -0300 From: Alexandre Biancalana <ale@seudns.net> To: freebsd-questions@freebsd.org Subject: emulators/vmware2 broken... Message-ID: <3F53B0F1.5020306@seudns.net>
next in thread | raw e-mail | index | archive | help
Hi All, I'm fighting with the following problem to install emulators/vmware2. cc -O -pipe -I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/include -I/usr/ports/emulators/vmwa e2/work/vmware-distrib/vmmon-only/common -I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/export/include -I/sys -I/usr/ports/emulators/vmwar 2/work/vmware-distrib/vmmon-only/../vmnet-only/freebsd/ -DCDEV_MAJOR_=200 -DSMP -DAPIC_IO -D_KERNEL -Wall -Wre undant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual - format-extensions -ansi -DKLD_MODULE -nostdinc -I- -I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-onl /include -I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/common -I/usr/ports/emulators/vmware2/wo k/vmware-distrib/vmmon-only/freebsd -I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/export/includ -I/sys -I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/../vmnet-only/freebsd/ -I. -I@ -I@/../inc ude -I/usr/include -mpreferred-stack-boundary=2 -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -ansi -c /usr/ports/emulators/vmw re2/work/vmware-distrib/vmmon-only/freebsd/hostif.c /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c: In function `FindMPN': /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c:184: invalid operands to binary >> /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c:188: invalid type argument of `una y *' /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c: In function `HostIF_LookupUserMPN : /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c:185: warning: `pte' might be used ninitialized in this function /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c: In function `HostIF_LockPage': /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c:185: warning: `pte' might be used ninitialized in this function /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c:185: warning: `pte' might be used ninitialized in this function /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c: In function `CheckFunc': /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c:185: warning: `pte' might be used ninitialized in this function *** Error code 1 Stop in /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only. *** Error code 1 Stop in /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only. *** Error code 1 Stop in /usr/ports/emulators/vmware2/work/vmware-distrib. *** Error code 1 Stop in /usr/ports/emulators/vmware2. *** Error code 1 Stop in /usr/ports/emulators/vmware2. That's my machine: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-PRERELEASE #0: Sat Aug 30 17:49:40 BRT 2003 root@Cruel:/usr/src/sys/compile/Cruel Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 860884854 Hz CPU: Intel Pentium III (860.88-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 268091392 (261808K bytes) avail memory = 257105920 (251080K bytes) Preloaded elf kernel "kernel" at 0xc03b5000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00fbc30 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82820 host to AGP bridge> mem 0xf4000000-0xf7ffffff at device 0.0 on pci0 pcib1: <PCI to PCI bridge (vendor=8086 device=250f)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 0.0 irq 9 pcib2: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xfbfffc00-0xfbfffc7f irq 5 at device 12.0 on pci2 xl0: Ethernet address: 00:b0:d0:50:c9:a7 miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82801AA (ICH) USB controller> port 0xff80-0xff9f irq 11 at device 31.2 on pci0 usb0: <Intel 82801AA (ICH) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 10 pcm0: <Intel ICH (82801AA)> port 0xdc80-0xdcbf,0xd800-0xd8ff irq 10 at device 31.5 on pci0 pcm0: <Analog Devices AD1881 AC97 Codec> orm0: <Option ROMs> at iomem 0xc0000-0xc97ff,0xc9800-0xcbfff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: parallel port not found. IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging ad0: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata0-master UDMA66 acd0: CDROM <LTN485> at ata1-master PIO4 acd1: CD-RW <Hewlett-Packard CD-Writer Plus 9100> at ata1-slave PIO4 I cvsup'ed my ports tree today. Some sugestion/advise ?! Regards, Alexandre
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3F53B0F1.5020306>