Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 2 Jan 2001 19:45:52 +0100
From:      "Piotr K. Isajew" <piotrek@pki.ex.com.pl>
To:        freebsd-mobile@freebsd.org
Subject:   OZ6832 - help needed
Message-ID:  <20010102194552.A2931@pki.ex.com.pl>

next in thread | raw e-mail | index | archive | help

--MGYHOYXEY6WxJCY8
Content-Type: text/plain; charset=us-ascii

Hi,

I've got Acer TravelMate 512DX with FreeBSD 4.2-RELEASE installed on
it. It seems to have OZ2Micro 6832 chip used as it's PCMCIA
controller. Kernel detects it as:

chip2: <PCI to CardBus bridge (vendor=1217 device=6832)> irq 9 at
device 19.0 on pci0
chip3: <PCI to CardBus bridge (vendor=1217 device=6832)> irq 9 at
device 19.1 on pci0

but pccardd reports:

fatal error: no PC-CARD slots


I've attached pciconf -l and dmesg output.

What should I do to bring this to work?

Any advice will be appreciated.
--MGYHOYXEY6WxJCY8
Content-Type: text/plain
Content-Disposition: attachment; filename="dmesg.txt"

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #0: Tue Jan  2 19:14:13 CET 2001
    root@:/usr/src/sys/compile/PKINB
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (365.81-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x66a  Stepping = 10
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 33488896 (32704K bytes)
avail memory = 29892608 (29192K bytes)
Preloaded elf kernel "kernel" at 0xc02de000.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5247 PCI-PCI(AGP Supported) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NeoMagic MagicMedia 256AV SVGA controller> at 0.0 irq 9
pci0: <unknown card> (vendor=0x11c1, dev=0x0449) at 6.0 irq 9
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <unknown card> (vendor=0x125d, dev=0x1969) at 8.0 irq 5
atapci0: <AcerLabs Aladdin ATA33 controller> port 0x78c0-0x78cf irq 15 at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
chip1: <AcerLabs M15x3 Power Management Unit> at device 17.0 on pci0
chip2: <PCI to CardBus bridge (vendor=1217 device=6832)> irq 9 at device 19.0 on pci0
chip3: <PCI to CardBus bridge (vendor=1217 device=6832)> irq 9 at device 19.1 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
ppc0: parallel port not found.
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 4645MB <IBM-DBCA-204860> [10068/15/63] at ata0-master WDMA2
acd0: CDROM <CD-224E> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
ad0: READ command timeout tag=0 serv=0 - resetting
ata0: resetting devices .. done
ad0: READ command timeout tag=0 serv=0 - resetting
ata0: resetting devices .. done
ad0: READ command timeout tag=0 serv=0 - resetting
ata0: resetting devices .. done
ad0: READ command timeout tag=0 serv=0 - resetting
ad0: trying fallback to PIO mode
ata0: resetting devices .. done

--MGYHOYXEY6WxJCY8
Content-Type: text/plain
Content-Disposition: attachment; filename="pciconf.txt"

chip0@pci0:0:0:	class=0x060000 card=0x00000000 chip=0x162110b9 rev=0x05 hdr=0x00
pcib1@pci0:1:0:	class=0x060400 card=0x00000000 chip=0x524710b9 rev=0x01 hdr=0x01
none0@pci0:6:0:	class=0x078000 card=0x04401468 chip=0x044911c1 rev=0x01 hdr=0x00
isab0@pci0:7:0:	class=0x060100 card=0x10021025 chip=0x153310b9 rev=0x0a hdr=0x00
none1@pci0:8:0:	class=0x040100 card=0x10021025 chip=0x1969125d rev=0x02 hdr=0x00
atapci0@pci0:15:0:	class=0x01018a card=0x00000000 chip=0x522910b9 rev=0x20 hdr=0x00
chip1@pci0:17:0:	class=0x068000 card=0x10021025 chip=0x710110b9 rev=0x09 hdr=0x00
chip2@pci0:19:0:	class=0x060700 card=0x10021025 chip=0x68321217 rev=0x34 hdr=0x02
chip3@pci0:19:1:	class=0x060700 card=0x10021025 chip=0x68321217 rev=0x34 hdr=0x02
none2@pci1:0:0:	class=0x030000 card=0x10021025 chip=0x000510c8 rev=0x20 hdr=0x00

--MGYHOYXEY6WxJCY8--


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010102194552.A2931>