Date: Sun, 28 Mar 2010 18:41:28 GMT From: Gabor Pali <pgj@FreeBSD.org> To: Perforce Change Reviews <perforce@FreeBSD.org> Subject: PERFORCE change 176210 for review Message-ID: <201003281841.o2SIfSca001023@repoman.freebsd.org>
next in thread | raw e-mail | index | archive | help
http://p4web.freebsd.org/chv.cgi?CH=176210 Change 176210 by pgj@Binturong on 2010/03/28 18:41:04 MFen (doc): 1.426 -> 1.428 hu_HU.ISO8859-2/books/handbook/advanced-networking/chapter.sgml 1.477 -> 1.479 hu_HU.ISO8859-2/books/handbook/mirrors/chapter.sgml 1.121 -> 1.122 hu_HU.ISO8859-2/share/sgml/freebsd.ent Affected files ... .. //depot/projects/docproj_hu/doc/hu_HU.ISO8859-2/books/handbook/advanced-networking/chapter.sgml#39 edit .. //depot/projects/docproj_hu/doc/hu_HU.ISO8859-2/books/handbook/mirrors/chapter.sgml#46 edit .. //depot/projects/docproj_hu/doc/hu_HU.ISO8859-2/share/sgml/freebsd.ent#29 edit Differences ... ==== //depot/projects/docproj_hu/doc/hu_HU.ISO8859-2/books/handbook/advanced-networking/chapter.sgml#39 (text+ko) ==== @@ -7,7 +7,7 @@ <!-- The FreeBSD Hungarian Documentation Project Translated by: PALI, Gabor <pgj@FreeBSD.org> %SOURCE% en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml - %SRCID% 1.426 + %SRCID% 1.428 --> <chapter id="advanced-networking" lang="hu"> @@ -1183,8 +1183,15 @@ más esetben ennek a nevét kell csak lecserélünk a példákban. A rendszerben elérhetõ vezeték - nélküli meghajtók a &man.wlan.4; man - oldal elején találhatóak. Ha a + nélküli meghajtók és az + általuk támogatott kártyák + listája a &os; Hardverjegyzetekben + található. Ezek a jegyzetek a + különbözõ architektúrákra + és kiadásokhoz a &os; + holnapjáról, a <ulink + url="http://www.FreeBSD.org/releases/index.html">Kiadási jegyzetek</ulink> + oldalról érhetõek el. Ha a vezeték nélküli eszközünkhöz nem létezik natív &os;-s meghajtó, akkor az <link @@ -1194,7 +1201,8 @@ meghajtóját is használhatjuk.</para> </note> - <para>Az eszközmeghajtó + <para>&os; 7.<replaceable>X</replaceable> esetén az + eszközmeghajtó beállításával együtt a 802.11 hálózatok támogatását is be kell töltenünk a rendszermagba. Ez az &man.ath.4; @@ -1213,13 +1221,11 @@ <programlisting>wlan_scan_ap_load="YES" wlan_scan_sta_load="YES"</programlisting> - <note> - <para>A &os; 7.<replaceable>X</replaceable> - változataiban mind a <literal>wlan_scan_ap</literal> - és <literal>wlan_scan_sta</literal> modulokra - szükségünk van, más verziók - esetén nem kell megadnunk ezeket.</para> - </note> + <para>A &os; 8.0 kiadástól + kezdõdõen ezek a modulok részei a &man.wlan.4; + meghajtónak, amely a hálózati + kártya meghajtójával együtt mindig + automatikusan betöltõdik.</para> <para>Emellett még azokra a modulokra is szükségünk van, amelyek a használni @@ -1265,23 +1271,23 @@ beállításait tartalmazó állományban:</para> - <programlisting>device ath # Atheros IEEE 802.11 vezeték nélküli hálózati meghajtó + <programlisting>device wlan # a 802.11 támogatása +device wlan_wep # 802.11 WEP támogatás +device wlan_ccmp # 802.11 CCMP támogatás +device wlan_tkip # 802.11 TKIP támogatás +device wlan_amrr # AMRR forgalomvezérlési algoritmus +device ath # Atheros IEEE 802.11 vezeték nélküli hálózati meghajtó device ath_hal # az Atheros meghajtó hardveres rétege -device ath_rate_sample # SampleRate forgalomvezérlési algoritmus -device wlan # a 802.11 támogatása options AH_SUPPORT_AR5416 # az AR5416 tx/rx leírók engedélyezése -device wlan_scan_ap # a 802.11 AP módú keresés -device wlan_scan_sta # a 802.11 STA módú keresés -device wlan_wep # 802.11 WEP támogatás -device wlan_ccmp # 802.11 CCMP támogatás -device wlan_tkip # 802.11 TKIP támogatás</programlisting> +device ath_rate_sample # SampleRate forgalomvezérlési algoritmus</programlisting> + + <para>Hozzátesszük, hogy az alábbi sorok + hozzáadása a &os; 7.<replaceable>X</replaceable> + változatában kötelezõ, más + verzióknál viszont nem:</para> - <para>Hozzátesszük, hogy a &os; - 7.<replaceable>X</replaceable> változatában a - <literal>wlan_scan_ap</literal> és - <literal>wlan_scan_sta</literal> modulok megadása - egyaránt kötelezõ, más - verzióknál viszont nem.</para> + <programlisting>device wlan_scan_ap # a 802.11 AP módú keresés +device wlan_scan_sta # a 802.11 STA módú keresés</programlisting> <para>Az elõbbiek megadásával fordítsuk újra és telepítsük @@ -1337,10 +1343,11 @@ rendszeradminisztrátor kezdeményezheti ezeket a kereséseket:</para> - <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> up scan</userinput> -SSID BSSID CHAN RATE S:N INT CAPS -dlinkap 00:13:46:49:41:76 6 54M 29:3 100 EPS WPA WME -freebsdap 00:11:95:c3:0d:ac 1 54M 22:1 100 EPS WPA</screen> + <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput> +&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> up scan</userinput> +SSID BSSID CHAN RATE S:N INT CAPS +dlinkap 00:13:46:49:41:76 11 54M -90:96 100 EPS WPA WME +freebsdap 00:11:95:c3:0d:ac 1 54M -83:96 100 EPS WPA</screen> <note> <para>Csak <option>up</option> jelzésû @@ -1350,6 +1357,28 @@ állapotban tartásához.</para> </note> + <note> + <para>&os; 7.<replaceable>X</replaceable> esetén + a <devicename>wlan<replaceable>0</replaceable></devicename> + eszköz helyett közvetlenül az adott + eszköz nevét kell megadnunk, + például + <devicename><replaceable>ath0</replaceable></devicename>. + Az iménti sorokat ennek megfelelõen + tehát ebben az esetben így kell + értelmezni:</para> + + <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> up scan</userinput></screen> + + <para>A leírás további + részében a + &os; 7.<replaceable>X</replaceable> + felhasználóknak ezen séma + alapján kell használniuk a parancsokat + és a konfigurációs + beállításokat.</para> + </note> + <para>A keresés során keletkezõ listában láthatjuk megtalált BBS vagy IBBS fajtájú hálózatokat. A @@ -1427,7 +1456,7 @@ listáját így tudjuk lekérdezni:</para> - <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> list scan</userinput></screen> + <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> list scan</userinput></screen> <para>Ezt az információt maga az adapter automatikusan, vagy a felhasználó tudja @@ -1481,14 +1510,26 @@ állományból hivatkozunk rá:</para> - <programlisting>ifconfig_ath0="DHCP"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="DHCP"</programlisting> + + <note> + <para>A korábban említettek szerint a + &os; 7.<replaceable>X</replaceable> + felhasználóknak csak a + kártyát kell + beállítani:</para> + + <programlisting>ifconfig_ath0="DHCP"</programlisting> + </note> <para>Ha viszont több hozzáférési pont közül mi magunk akarunk kiválasztani egyet, akkor ezt az SSID megadásával tehetjük meg:</para> - <programlisting>ifconfig_ath0="ssid <replaceable>saját_ssid</replaceable> DHCP"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="ssid <replaceable>saját_ssid</replaceable> DHCP"</programlisting> <para>Amikor olyan környezetben vagyunk, ahol több hozzáférési pontnak is megegyezik az @@ -1501,7 +1542,8 @@ BSSID-ját is definiálni kell (és az SSID-t akár el is hagyhatjuk):</para> - <programlisting>ifconfig_ath0="ssid <replaceable>saját_ssid</replaceable> bssid <replaceable>xx:xx:xx:xx:xx:xx</replaceable> DHCP"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="ssid <replaceable>saját_ssid</replaceable> bssid <replaceable>xx:xx:xx:xx:xx:xx</replaceable> DHCP"</programlisting> <para>Más módokon is képesek vagyunk szabályozni a hozzáférési @@ -1519,7 +1561,8 @@ sávra leszûkíteni, például a</para> - <programlisting>ifconfig_ath0="mode <replaceable>11g</replaceable> ssid <replaceable>saját_ssid</replaceable> DHCP"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="mode <replaceable>11g</replaceable> ssid <replaceable>saját_ssid</replaceable> DHCP"</programlisting> <para>beállítás hatására a kártya 802.11g módban fog üzemelni, @@ -1536,7 +1579,6 @@ paraméterekrõl részletesebb leírást az &man.ifconfig.8; man oldalon találhatunk.</para> - </sect5> <sect5> @@ -1588,7 +1630,8 @@ elérést valahogy így tudjuk beállítani:</para> - <programlisting>ifconfig_ath0="authmode shared wepmode on weptxkey <replaceable>1</replaceable> wepkey <replaceable>01234567</replaceable> DHCP"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="authmode shared wepmode on weptxkey <replaceable>1</replaceable> wepkey <replaceable>01234567</replaceable> DHCP"</programlisting> <para>Általánosságban véve elmondhatjuk, hogy az osztott kulcsú @@ -1629,7 +1672,8 @@ paramétert az eszközünk beállításaihoz:</para> - <programlisting>ifconfig_ath0="DHCP"</programlisting> + <programlisting>wlans_ath0="DHCP" +ifconfig_wlan0="DHCP"</programlisting> <para>Így már készen is állunk a vezeték nélküli felület @@ -1644,15 +1688,16 @@ tudjuk az <devicename>ath0</devicename> felület állapotát:</para> - <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable></userinput> -ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 - inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1 + <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable></userinput> +wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 + ether 00:11:95:d5:43:62 inet 192.168.1.100 netmask 0xffffff00 broadcast 192.168.1.255 - ether 00:11:95:d5:43:62 - media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/54Mbps) + media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11g status: associated - ssid dlinkap channel 6 bssid 00:13:46:49:41:76 - authmode OPEN privacy OFF txpowmax 36 protmode CTS bintval 100</screen> + ssid dlinkap channel 11 (2462 Mhz 11g) bssid 00:13:46:49:41:76 + country US ecm authmode OPEN privacy OFF txpower 21.5 bmiss 7 + scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 + roam:rate 5 protmode CTS wme burst</screen> <para>A <literal>status: associated</literal> azt jelenti, hogy sikeresen csatlakoztunk egy vezeték @@ -1661,9 +1706,9 @@ <literal>bssid 00:13:46:49:41:76</literal> rész a hozzáférési pont MAC-címét tartalmazza. Az - <literal>authmode</literal> pedig arról + <literal>authmode OPEN</literal> pedig arról számol be, hogy a kommunikáció nem - titkosított (<literal>OPEN</literal>).</para> + titkosított.</para> </sect5> @@ -1681,7 +1726,8 @@ többi paramétert azonban feltétlenül hagyjuk meg:</para> - <programlisting>ifconfig_ath0="ssid <replaceable>saját_ssid</replaceable> inet <replaceable>192.168.1.100</replaceable> netmask <replaceable>255.255.255.0</replaceable>"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="ssid <replaceable>saját_ssid</replaceable> inet <replaceable>192.168.1.100</replaceable> netmask <replaceable>255.255.255.0</replaceable>"</programlisting> </sect5> </sect4> @@ -1797,28 +1843,30 @@ be és az IP-címet a DHCP szervertõl kérjük el:</para> - <programlisting>ifconfig_ath0="WPA DHCP"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_ath0="WPA DHCP"</programlisting> <para>Innentõl már fel is tudjuk éleszteni a felületet:</para> <screen>&prompt.root; <userinput><filename>/etc/rc.d/netif</filename> start</userinput> Starting wpa_supplicant. -DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 5 -DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 6 +DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 5 +DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6 DHCPOFFER from 192.168.0.1 -DHCPREQUEST on ath0 to 255.255.255.255 port 67 +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 DHCPACK from 192.168.0.1 bound to 192.168.0.254 -- renewal in 300 seconds. -ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 - inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1 +wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 + ether 00:11:95:d5:43:62 inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255 - ether 00:11:95:d5:43:62 - media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/36Mbps) + media: IEEE 802.11 Wireless Ethernet autoselect OFDM/36Mbps mode 11g status: associated - ssid freebsdap channel 1 bssid 00:11:95:c3:0d:ac - authmode WPA privacy ON deftxkey UNDEF TKIP 2:128-bit txpowmax 36 - protmode CTS roaming MANUAL bintval 100</screen> + ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac + country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF + AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan + bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS + wme burst roaming MANUAL</screen> <para>Kézzel is megpróbálhatjuk elindítani az <link @@ -1827,35 +1875,37 @@ <filename>/etc/wpa_supplicant.conf</filename> állomány használatával:</para> - <screen>&prompt.root; <userinput>wpa_supplicant -i <replaceable>ath0</replaceable> -c /etc/wpa_supplicant.conf</userinput> + <screen>&prompt.root; <userinput>wpa_supplicant -i <replaceable>wlan0</replaceable> -c /etc/wpa_supplicant.conf</userinput> Trying to associate with 00:11:95:c3:0d:ac (SSID='freebsdap' freq=2412 MHz) Associated with 00:11:95:c3:0d:ac -WPA: Key negotiation completed with 00:11:95:c3:0d:ac [PTK=TKIP GTK=TKIP]</screen> +WPA: Key negotiation completed with 00:11:95:c3:0d:ac [PTK=CCMP GTK=CCMP] +CTRL-EVENT-CONNECTED - Connection to 00:11:95:c3:0d:ac completed (auth) [id=0 id_str=]</screen> <para>A következõ parancs a <command>dhclient</command> indítása legyen, amivel megszerezzük a DHCP szervertõl az IP-címünket:</para> - <screen>&prompt.root; <userinput>dhclient <replaceable>ath0</replaceable></userinput> -DHCPREQUEST on ath0 to 255.255.255.255 port 67 + <screen>&prompt.root; <userinput>dhclient <replaceable>wlan0</replaceable></userinput> +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 DHCPACK from 192.168.0.1 bound to 192.168.0.254 -- renewal in 300 seconds. -&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable></userinput> +&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable></userinput> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 - inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1 + ether 00:11:95:d5:43:62 inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255 - ether 00:11:95:d5:43:62 - media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/48Mbps) + media: IEEE 802.11 Wireless Ethernet OFDM/36Mbps mode 11g status: associated - ssid freebsdap channel 1 bssid 00:11:95:c3:0d:ac - authmode WPA privacy ON deftxkey UNDEF TKIP 2:128-bit txpowmax 36 - protmode CTS roaming MANUAL bintval 100</screen> + ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac + country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF + AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan + bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS + wme burst roaming MANUAL</screen> <note> <para>Ha az <filename>/etc/rc.conf</filename> állományban szerepel a - <literal>ifconfig_ath0="DHCP"</literal> sor, akkor + <literal>ifconfig_wlan0="DHCP"</literal> sor, akkor egyáltalán nem szükséges a <command>dhclient</command> parancs manuális kiadása, mivel a <command>dhclient</command> @@ -1869,17 +1919,18 @@ <command>wpa_supplicant</command> sikeresen lebonyolította a hitelesítést:</para> - <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> inet <replaceable>192.168.0.100</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput> -&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable></userinput> + <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.0.100</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput> +&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable></userinput> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 - inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1 + ether 00:11:95:d5:43:62 inet 192.168.0.100 netmask 0xffffff00 broadcast 192.168.0.255 - ether 00:11:95:d5:43:62 - media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/36Mbps) + media: IEEE 802.11 Wireless Ethernet OFDM/36Mbps mode 11g status: associated - ssid freebsdap channel 1 bssid 00:11:95:c3:0d:ac - authmode WPA privacy ON deftxkey UNDEF TKIP 2:128-bit txpowmax 36 - protmode CTS roaming MANUAL bintval 100</screen> + ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac + country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF + AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan + bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS + wme burst roaming MANUAL</screen> <para>Ha egyáltalán nem használunk DHCP szervert, akkor nekünk kell beállítani @@ -2022,9 +2073,10 @@ <para>Az <filename>/etc/rc.conf</filename> állományba vegyük fel a - következõ sort:</para> + következõ sorokat:</para> - <programlisting>ifconfig_ath0="WPA DHCP"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="WPA DHCP"</programlisting> <para>A következõ lépés a felület felébresztése lesz az @@ -2033,19 +2085,20 @@ <screen>&prompt.root; <userinput>/etc/rc.d/netif start</userinput> Starting wpa_supplicant. -DHCPREQUEST on ath0 to 255.255.255.255 port 67 -DHCPREQUEST on ath0 to 255.255.255.255 port 67 +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 DHCPACK from 192.168.0.20 bound to 192.168.0.254 -- renewal in 300 seconds. -ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 - inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1 +wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 + ether 00:11:95:d5:43:62 inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255 - ether 00:11:95:d5:43:62 - media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps) + media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11g status: associated - ssid freebsdap channel 1 bssid 00:11:95:c3:0d:ac - authmode WPA2/802.11i privacy ON deftxkey UNDEF TKIP 2:128-bit - txpowmax 36 protmode CTS roaming MANUAL bintval 100</screen> + ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac + country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF + AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan + bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS + wme burst roaming MANUAL</screen> <para>Természetesen, ahogy azt már az elõbbiekben is megmutattuk, mindezt manuálisan @@ -2134,32 +2187,34 @@ </callout> </calloutlist> - <para>Mindezek mellett még a következõ sort - is vegyük fel az <filename>/etc/rc.conf</filename> + <para>Mindezek mellett még a következõ + sorokat is vegyük fel az + <filename>/etc/rc.conf</filename> állományba:</para> - <programlisting>ifconfig_ath0="WPA DHCP"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="WPA DHCP"</programlisting> <para>Ezután hozzuk mûködésbe a felületet:</para> <screen>&prompt.root; <userinput>/etc/rc.d/netif start</userinput> Starting wpa_supplicant. -DHCPREQUEST on ath0 to 255.255.255.255 port 67 -DHCPREQUEST on ath0 to 255.255.255.255 port 67 -DHCPREQUEST on ath0 to 255.255.255.255 port 67 +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 DHCPACK from 192.168.0.20 bound to 192.168.0.254 -- renewal in 300 seconds. -ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 - inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1 +wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 + ether 00:11:95:d5:43:62 inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255 - ether 00:11:95:d5:43:62 - media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps) + media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11g status: associated - ssid freebsdap channel 1 bssid 00:11:95:c3:0d:ac - authmode WPA2/802.11i privacy ON deftxkey UNDEF TKIP 2:128-bit - txpowmax 36 protmode CTS roaming MANUAL bintval 100</screen> - + ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac + country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF + AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan + bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS + wme burst roaming MANUAL</screen> </sect5> <sect5 id="network-wireless-wpa-eap-peap"> @@ -2274,27 +2329,29 @@ <filename>/etc/rc.conf</filename> állományhoz:</para> - <programlisting>ifconfig_ath0="WPA DHCP"</programlisting> + <programlisting>wlans_ath0="wlan0" +ifconfig_wlan0="WPA DHCP"</programlisting> <para>Ezután már mûködésbe is hozhatjuk a felületet:</para> <screen>&prompt.root; <userinput>/etc/rc.d/netif start</userinput> Starting wpa_supplicant. -DHCPREQUEST on ath0 to 255.255.255.255 port 67 -DHCPREQUEST on ath0 to 255.255.255.255 port 67 -DHCPREQUEST on ath0 to 255.255.255.255 port 67 +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 +DHCPREQUEST on wlan0 to 255.255.255.255 port 67 DHCPACK from 192.168.0.20 bound to 192.168.0.254 -- renewal in 300 seconds. -ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 - inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1 +wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 + ether 00:11:95:d5:43:62 inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255 - ether 00:11:95:d5:43:62 - media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps) + media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11g status: associated - ssid freebsdap channel 1 bssid 00:11:95:c3:0d:ac - authmode WPA2/802.11i privacy ON deftxkey UNDEF TKIP 2:128-bit - txpowmax 36 protmode CTS roaming MANUAL bintval 100</screen> + ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac + country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF + AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan + bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS + wme burst roaming MANUAL</screen> </sect5> </sect4> @@ -2314,7 +2371,8 @@ használatán keresztül állítható be:</para> - <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> ssid <replaceable>saját_hálózat</replaceable> wepmode on weptxkey 3 wepkey 3:0x3456789012 \ + <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput> +&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> ssid <replaceable>saját_hálózat</replaceable> wepmode on weptxkey 3 wepkey 3:0x3456789012 \ inet <replaceable>192.168.1.100</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput></screen> <itemizedlist> @@ -2374,7 +2432,7 @@ <para>Majd:</para> - <screen>&prompt.root; <userinput>wpa_supplicant -i <replaceable>ath0</replaceable> -c /etc/wpa_supplicant.conf</userinput> + <screen>&prompt.root; <userinput>wpa_supplicant -i <replaceable>wlan0</replaceable> -c /etc/wpa_supplicant.conf</userinput> Trying to associate with 00:13:46:49:41:76 (SSID='dlinkap' freq=2437 MHz) Associated with 00:13:46:49:41:76</screen> @@ -2398,12 +2456,12 @@ <para>Így állítjuk be az <hostid>A</hostid> gépet:</para> - <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> ssid <replaceable>freebsdap</replaceable> mediaopt adhoc inet <replaceable>192.168.0.1</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput> -&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable></userinput> - ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 + <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput> +&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> ssid <replaceable>freebsdap</replaceable> mediaopt adhoc inet <replaceable>192.168.0.1</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput> +&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable></userinput> + wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 + ether 00:11:95:c3:0d:ac inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255 - inet6 fe80::211:95ff:fec3:dac%ath0 prefixlen 64 scopeid 0x4 - ether 00:11:95:c3:0d:ac media: IEEE 802.11 Wireless Ethernet autoselect <adhoc> (autoselect <adhoc>) status: associated ssid freebsdap channel 2 bssid 02:11:95:c3:0d:ac @@ -2417,9 +2475,9 @@ képesek vagyunk észlelni az <hostid>A</hostid> gépet:</para> - <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> up scan</userinput> - SSID BSSID CHAN RATE S:N INT CAPS - freebsdap 02:11:95:c3:0d:ac 2 54M 19:3 100 IS</screen> + <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> up scan</userinput> + SSID BSSID CHAN RATE S:N INT CAPS + freebsdap 02:11:95:c3:0d:ac 2 54M -90:-96 100 IS</screen> <para>A kimenetben szereplõ <literal>I</literal> is megerõsíti, hogy az <hostid>A</hostid> gépet @@ -2428,12 +2486,12 @@ beállítanunk egy másik IP-címmel:</para> - <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> ssid <replaceable>freebsdap</replaceable> mediaopt adhoc inet <replaceable>192.168.0.2</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput> -&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable></userinput> - ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 - inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1 + <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput> +&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> ssid <replaceable>freebsdap</replaceable> mediaopt adhoc inet <replaceable>192.168.0.2</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput> +&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable></userinput> + wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 + ether 00:11:95:d5:43:62 inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255 - ether 00:11:95:d5:43:62 media: IEEE 802.11 Wireless Ethernet autoselect <adhoc> (autoselect <adhoc>) status: associated ssid freebsdap channel 2 bssid 02:11:95:c3:0d:ac ==== //depot/projects/docproj_hu/doc/hu_HU.ISO8859-2/books/handbook/mirrors/chapter.sgml#46 (text+ko) ==== @@ -7,7 +7,7 @@ The FreeBSD Hungarian Documentation Project Translated by: PALI, Gabor <pgj@FreeBSD.org> %SOURCE% en_US.ISO8859-1/books/handbook/mirrors/chapter.sgml - %SRCID% 1.477 + %SRCID% 1.479 --> <appendix id="mirrors" lang="hu"> @@ -1168,14 +1168,9 @@ hiszen az alaprendszer része. A &os; korábbi verzióinak alaprendszerei ugyan nem tartalmazzák a &man.csup.1; parancsot, viszont a <filename - role="package">net/csup</filename> port vagy csomag + role="package">net/csup</filename> port vagy csomag segítségével pillanatok alatt - telepíteni tudjuk. Emellett a - <application>csup</application> segédprogram nem - támogatja a CVS módot sem. Teljes repositoryk - tükrözéséhez ezért - továbbra is a <application>CVSup</application> kell - használnunk. Amennyiben a + telepíteni tudjuk. Amennyiben a <application>csup</application> mellett tennénk le a voksunkat, a szakasz fennmaradó részében egyszerûen hagyjuk ki a <application>CVSup</application> @@ -3416,6 +3411,14 @@ <variablelist> <varlistentry> + <term>RELENG_7_3_0_RELEASE</term> + + <listitem> + <para>&os; 7.3</para> + </listitem> + </varlistentry> + + <varlistentry> <term>RELENG_7_2_0_RELEASE</term> <listitem> ==== //depot/projects/docproj_hu/doc/hu_HU.ISO8859-2/share/sgml/freebsd.ent#29 (text+ko) ==== @@ -12,7 +12,7 @@ <!-- The FreeBSD Hungarian Documentation Project Translated by: PALI, Gabor <pgj@FreeBSD.org> %SOURCE% share/sgml/freebsd.ent - %SRCID% 1.121 + %SRCID% 1.122 --> <!-- These will almost certainly remain the same, but are here for @@ -68,8 +68,8 @@ <!ENTITY rel.current.errata 'http://www.FreeBSD.org/releases/&rel.current;R/errata.html'> <!-- Entities for multiple "latest" versions of FreeBSD --> -<!ENTITY rel2.current "7.2"> -<!ENTITY rel2.current.date "2009 május"> +<!ENTITY rel2.current "7.3"> +<!ENTITY rel2.current.date "2010 március"> <!ENTITY rel2.current.notes 'http://www.FreeBSD.org/releases/&rel2.current;R/notes.html'> <!ENTITY rel2.current.hardware 'http://www.FreeBSD.org/releases/&rel2.current;R/hardware.html'> <!ENTITY rel2.current.errata 'http://www.FreeBSD.org/releases/&rel2.current;R/errata.html'>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201003281841.o2SIfSca001023>