Date: Sun, 31 Dec 1995 18:13:47 -0500 (EST) From: "Jonathan M. Bresler" <jmb@freebsd.org> To: Stephen Couchman <scouch@io.org> Cc: questions@freebsd.org Subject: Re: iijpp STILL cannot talk to my modem :-(( Message-ID: <Pine.BSF.3.91.951231180518.21776A-100000@Aspen.Woc.Atinc.COM> In-Reply-To: <199512311930.OAA04321@io.org>
next in thread | previous in thread | raw e-mail | index | archive | help
what you have included looks correct :)
do you have crtscts enabled on /dev/cuaa1? what about clocal?
please check these by doing 'stty -a /dev/cuaa1'. you have have a getty
running on any of the ttydX ports?
here are my setting for comparision:
stty -a -f /dev/cuaa1
speed 57600 baud; 0 rows; 0 columns;
lflags: -icanon -isig -iexten -echo -echoe -echok -echoke -echonl
-echoctl -echoprt -altwerase -noflsh -tostop -flusho -pendin
-nokerninfo -extproc
iflags: -istrip -icrnl -inlcr -igncr -ixon -ixoff -ixany -imaxbel ignbrk
-brkint -inpck ignpar -parmrk
oflags: -opost -onlcr -oxtabs
cflags: cread cs8 -parenb -parodd -hupcl clocal -cstopb crtscts -dsrflow
-dtrflow -mdmbuf
cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>;
eol2 = <undef>; erase = ^?; intr = ^C; kill = ^U; lnext = ^V;
min = 1; quit = ^\; reprint = ^R; start = ^Q; status = <undef>;
stop = ^S; susp = ^Z; time = 0; werase = ^W;
i am using a usr sportster 14.4. here are the modem settings:
USRobotics Sportster 14400 Fax Settings...
B0 E1 F1 M1 Q0 V1 X4 Y0
BAUD=57600 PARITY=N WORDLEN=8
DIAL=HUNT ON HOOK
&A3 &B1 &C1 &D2 &G0 &H1 &I0 &K1
&M4 &N0 &P0 &R2 &S1 &T5 &Y1
S00=000 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002
S07=060 S08=002 S09=006 S10=007 S11=070 S12=050 S13=000
S14=000 S15=000 S16=000 S17=000 S18=000 S19=000 S20=000
S21=010 S22=017 S23=019 S24=000 S25=005 S26=000 S27=000
S28=008 S29=020 S30=000 S31=000 S32=000 S33=000 S34=006
S35=000 S36=014 S37=000 S38=000 S44=015 S51=000
> Enter to terminal mode.
> Type '~?' for help.
> (typed AT<cr> here, but got no response)
> ~. (these were not echoed)
> ppp ON myhost> show modem
> ...
> (same as above except outq: 1)
> ...
> ppp ON myhost> quit
>
> (process hangs here. even kill -9 will not terminate it.)
as you have said, it sounds like ppp can not talk to the modem.
i may have 'hung' waiting for a modem signal to be asserted. this would
prevent it from working, i believe.
Jonathan M. Bresler FreeBSD Postmaster jmb@FreeBSD.ORG
play go. ride bike. hack FreeBSD.--ah the good life
i am moving to a new job. PLEASE USE: jmb@FreeBSD.ORG
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.951231180518.21776A-100000>