Date: Mon, 3 Feb 1997 16:54:15 +0900 From: okkun@mickey.ai.kyutech.ac.jp (Masaru Okumura) To: joerg_wunsch@uriah.heep.sax.de (Joerg Wunsch) Cc: okkun@mickey.ai.kyutech.ac.jp (Masaru Okumura), freebsd-bugs@freefall.freebsd.org Subject: Re: i386/2395: 2.2-BETA installation problem on ICL ErgoPro s450 Message-ID: <199702030749.QAA28217@mickey00.mickey.ai.kyutech.ac.jp>
next in thread | raw e-mail | index | archive | help
Hello, J Wunsch At 2:57 PM 97.2.1 +0100, J Wunsch wrote: >>> I tried your advice, but can't boot with -v option. >> The boot process hanged after "apm0: disabled, not probed.", >> and all key inputs refused. > >No, you gotta type the -v at the Boot: prompt already. I understood your comment, and tried it. The following is a part of boot messegas with 2.2-BETA(-v option). Please, show the screen snapshot(JPEG files), if you have questions. http://www.arch.mickey.ai.kyutech.ac.jp/user/okkun/WWW/freebsd/bootlog.html #So, I found that the calibrated clock frequency(67MHz) was different from #my laptop clock frequency(P5-133MHz). --------boot log-(retyped from screen snapshots)-------- FreeBSD 2.2-BETA_A 03: Thu:Dec:26:02:29:44 1996 jkhotimo.cdrom.com:/usr/src/sys/compile/BOOTMFS Calibrating clock(s) relative to mci4681BA:clock ... i586 clock : 67198523 Hz, 251 clock: 1193277 Hz CLK_USE_i8254_CALIBRATION not specified - using default frequency CLK_USE_i586_CALIBRATION not specified - using old calibrarion mehotd ---<skip menu>--- avail memory = 28950528 (28272K bytes) pcibus_setup(1): mode 1 addr port (0x0cf0) is 0x00000000 pcibus_setup(1a): modeires:0x00000000 (0x00000000) pcibus_check: device 0 is there (id:c5571045) Probing for devices on PCI bus 0: configuration mode 1 aloows 32 devices. Chip0 <generic PCI bridge (vender=1015 device=c557 subclass:0)> rev 20 on pci0:0 Chip1<generic PCI bridge (vender=1015 device=c550 subclass:1)> rev 2 on pci0:1 vga <VGA conpatible display device> rev 69 on pci0:2 mapreg[10] type:0 addr=c0000000:size=1000000, Chip2 <generic PCI bridge (vender=1100:devie=0466:subclass=7)> rev 0: int a irq?? on pci0:3:0 mapreg[10] type:0 addr=c0000000:size=1000, mapreg[14] type:0 addr=02000000:size=fe000000, Chip3 <generic PCI bridge (vender=1100:devie=0466:subclass=7)> rev 0: int b irq?? on pci0:3:1 mapreg[10] type:0 addr=c0000000:size=1000, mapreg[14] type:0 addr=02000000:size=fe000000, pci0: uses -58323456 bytes of memory from 2000000 upto ffffffff. Probing for devices on the ISA bus: ---- -- Masaru Okumura (Kyushu Institute of Tech.) E-mail: okkun@mickey.ai.kyutech.ac.jp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199702030749.QAA28217>