Date: Tue, 10 Sep 2002 07:49:17 +0300 (EEST) From: Heikki Suonsivu <hsu@bbnetworks.net> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/42621: Dell Inspiron 5000e hangs when using Orinoco or Cisco WLAN cards Message-ID: <200209100449.g8A4nHgB062943@news.bbnetworks.net>
next in thread | raw e-mail | index | archive | help
>Number: 42621 >Category: kern >Synopsis: Dell Inspiron 5000e hangs when using Orinoco or Cisco WLAN cards >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Sep 09 21:50:04 PDT 2002 >Closed-Date: >Last-Modified: >Originator: Heikki Suonsivu >Release: FreeBSD 4.5-STABLE i386 >Organization: bbnetworks >Environment: System: FreeBSD news.bbnetworks.net 4.5-STABLE FreeBSD 4.5-STABLE #1: Mon Mar 18 17:56:25 EET 2002 hsu@news.bbnetworks.net:/m/news/overview/obj/usr/src/sys/CAT i386 Dell Inspiron 5000e. BIOS flashed to latest, 1600x1200 LCD. dmesg: Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-PRERELEASE #0: Mon Sep 9 05:29:29 EEST 2002 root@:/usr/obj/usr/src/sys/LAPTOP Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (696.97-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 201261056 (196544K bytes) avail memory = 190623744 (186156K bytes) Preloaded elf kernel "kernel" at 0xc04f6000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00fdf50 apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI model 4c46 graphics accelerator> at 0.0 irq 11 pci_cfgintr_linked: linked (60) to hard-routed irq 11 pci_cfgintr: 0:4 INTA routed to irq 11 pcic0: <TI PCI-1225 PCI-CardBus Bridge> mem 0x88000000-0x88000fff irq 11 at device 4.0 on pci0 pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq] pccard0: <PC Card bus (classic)> on pcic0 pci_cfgintr_linked: linked (60) to hard-routed irq 11 pci_cfgintr: 0:4 INTA routed to irq 11 pcic1: <TI PCI-1225 PCI-CardBus Bridge> mem 0x88001000-0x88001fff irq 11 at device 4.1 on pci0 pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq] pccard1: <PC Card bus (classic)> on pcic1 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 5 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0 chip2: <ESS Technology Maestro 2E Audio controller> port 0x1400-0x14ff irq 5 at device 8.0 on pci0 orm0: <Option ROM> at iomem 0xc0000-0xcefff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/7 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 DUMMYNET initialized (011031) IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default ata1-slave: ATAPI identify retries exceeded pccard: card inserted, slot 0 ad0: 38154MB <IC25N040ATCS04-0> [77520/16/63] at ata0-master UDMA33 acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s2a ep0: <3Com 3C574> at port 0x240-0x25f irq 11 flags 0x1 slot 0 on pccard0 ep0: Ethernet address 00:50:04:58:99:32 >Description: When inserting originoco silver or cisco aironet 340 WLAN cards, the computer hangs up after initializing the card: kernel: pccard: card inserted, slot 0 syslog: pccardd[47]: Card "Lucent Technologies"("WaveLAN/IEEE") [Version 01.01] [] syslog: matched "Lucent Technologies" ("WaveLAN/IEEE") [(null)] [(null)] syslog: pccardd[47]: Using I/O addr 0x240, size 64 syslog: pccardd[47]: Setting config reg at offs 0x3e0 to 0x41, Reset time = 50 ms syslog: pccardd[47]: Assigning I/O window 0, start 0x240, size 0x40 flags 0x5 syslog: pccardd[47]: Assign wi0, io 0x240-0x27f, mem 0x0, 0 bytes, irq 11, flags 0 kernel: wi0 at port 0x240-0x27f irq 11 slot 0 on pccard0 kernel: wi0 802.11 address: 00:xx:xx:xx:xx:xx And the system locks up at this point. Assuming this could be irq problem, I tried removing all other irqs except 10 from pccard.conf, but pccardd insist on using 11. -i 10 on command like does change the situation. I have tried kernel options listed in wi manual page, with no help (other than messing up the kernel more). On windows, lucent (orinoco) card shows at I/O 1080-10BF, irq 10, and works fine. In windows IRQ 10 seems to be the only one actually available, all the others are assigned to something. 3com 3C574 (ep) works fine, it also gets irq 11 assigned for it. I have used GENERIC kernel from 4.6.2, and -stable from 6th september with my own kernel config and dell inspiron 5000e config I found in FreeBSD laptop compatibility page, neither helped, same problem. It cannot be wi only, as cisco aironet card uses an driver. It cannot be for all pcmcia cards as 3c574 works. >How-To-Repeat: Plug in the card, it initializes and dies, hard reset is the only option I have found. >Fix: >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200209100449.g8A4nHgB062943>