Date: Thu, 15 May 2003 16:07:02 -0400 From: Mikhail Teterin <mi+mx@aldan.algebra.com> To: scsi@FreeBSD.org Cc: aschneider@murex.com Subject: troubles with an Exhabyte tape drive Message-ID: <200305151607.02102.mi%2Bmx@aldan.algebra.com>
next in thread | raw e-mail | index | archive | help
Hello! We can read the tapes using this drive: sym0: <875> port 0x2400-0x24ff mem 0x42000000-0x42000fff,0x42100000-0x421000ff irq 11 at device 16.0 on pci0 sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sa0 at sym0 bus 0 target 0 lun 0 sa0: <EXABYTE EXB-89008E030203 V41e> Removable Sequential Access SCSI-2 device sa0: 20.000MB/s transfers (10.000MHz, offset 15, 16bit) but we can not write anything :-( The kernel's messages logged are: (sa0:sym0:0:0:0): WRITE(06). CDB: a 0 0 28 0 0 (sa0:sym0:0:0:0): ILLEGAL REQUEST asc:30,5 (sa0:sym0:0:0:0): Cannot write medium - incompatible format Is it our clumsiness, or the tapes (we tried about a dozen), or the drive? Thanks a lot! -mi
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200305151607.02102.mi%2Bmx>