Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 25 Jun 2006 13:54:35 +1000
From:      Mark Andrews <Mark_Andrews@isc.org>
To:        stable@freebsd.org
Subject:   Pentax optio a10
Message-ID:  <200606250354.k5P3sZvK001568@drugs.dv.isc.org>

next in thread | raw e-mail | index | archive | help

	Anyone have experience getting a Pentax optio a10 mounted?

	Mark

umass0: PENTAX PENTAX OPTIO A10, rev 2.00/0.00, addr 2

	
drugs# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000)
, rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000)
, rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000)
, rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000)
, rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb4:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000)
, rev 1.00
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
 port 5 addr 2: high speed, self powered, config 1, product 0x0055(0x0055), vendor 0x0a17(0x0a17), rev 0.00
 port 6 powered
 port 7 powered
 port 8 powered
drugs# 
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-STABLE #7: Sun Jun 25 10:23:37 EST 2006
    marka@drugs.dv.isc.org:/usr/obj/usr/src/sys/DRUGS
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.13-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
  Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
  AMD Features=0x100000<NX>
real memory  = 1065160704 (1015 MB)
avail memory = 1033383936 (985 MB)
ACPI APIC Table: <DELL   CPi R  >
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
acpi0: <DELL CPi R  > on motherboard
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
acpi_video0: <ACPI video extension> port 0xec38-0xec3f mem 0xdff00000-0xdff7ffff,0xc0000000-0xcfffffff,0xdfec0000-0xdfefffff irq 16 at device 2.0 on pci0
acpi_video1: <ACPI video extension> mem 0xdff80000-0xdfffffff at device 2.1 on pci0
evaluation of \\_SB_.PCI0.VID2._DOD makes no sense
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem 0xdfdf0000-0xdfdfffff irq 16 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:14:22:d9:fb:dc
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xbf80-0xbf9f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xbf60-0xbf7f irq 17 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xbf40-0xbf5f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xbf20-0xbf3f irq 19 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xffa80800-0xffa80bff irq 16 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib2
cbb0: <PCI-CardBus Bridge> at device 1.0 on pci3
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci3: <simple comms> at device 1.5 (no driver attached)
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xdfcff000-0xdfcfffff irq 17 at device 3.0 on pci3
iwi0: Ethernet address: 00:16:6f:46:b7:5d
pcm0: <Intel ICH6 (82801FB)> port 0xed00-0xedff,0xec40-0xec7f mem 0xdfebfe00-0xdfebffff,0xdfebfd00-0xdfebfdff irq 16 at device 30.2 on pci0
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 17 at device 31.2 on pci0
atapci0: failed to enable memory mapping!
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1729128523 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to deny, logging disabled
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
battery1: battery initialization start
ad0: 95396MB <Hitachi HTS721010G9AT00 MCZOA53A> at ata0-master UDMA100
battery0: battery initialization done, tried 1 times
acd0: CDRW <TSSTcorpCD-RW/DVD-ROM TSL462C/DE01> at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s4a
battery1: battery initialization failed, giving up
iwi0: link state changed to UP
acpi_acad0: Off Line
acpi_acad0: On Line
umass0: PENTAX PENTAX OPTIO A10, rev 2.00/0.00, addr 2
umass0: CBI reset failed, IOERROR
umass0: CBI bulk-in stall clear failed, IOERROR
umass0: CBI bulk-out stall clear failed, IOERROR
umass0: CBI reset failed, IOERROR
umass0: CBI bulk-in stall clear failed, IOERROR
umass0: CBI bulk-out stall clear failed, IOERROR
umass0: CBI reset failed, IOERROR
umass0: CBI bulk-in stall clear failed, IOERROR
umass0: CBI bulk-out stall clear failed, IOERROR
umass0: CBI reset failed, IOERROR
umass0: CBI bulk-in stall clear failed, IOERROR
umass0: CBI bulk-out stall clear failed, IOERROR
umass0: CBI reset failed, IOERROR
umass0: CBI bulk-in stall clear failed, IOERROR
umass0: CBI bulk-out stall clear failed, IOERROR
umass0: at uhub4 port 5 (addr 2) disconnected
umass0: detached
umass0: PENTAX PENTAX OPTIO A10, rev 2.00/0.00, addr 2
umass0: CBI reset failed, IOERROR
umass0: CBI bulk-in stall clear failed, IOERROR
umass0: CBI bulk-out stall clear failed, IOERROR
umass0: CBI reset failed, IOERROR
umass0: at uhub4 port 5 (addr 2) disconnected
umass0: detached
-- 
Mark Andrews, ISC
1 Seymour St., Dundas Valley, NSW 2117, Australia
PHONE:	+61 2 9871 4742		         INTERNET: Mark_Andrews@isc.org



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200606250354.k5P3sZvK001568>