Date: Thu, 6 Feb 2003 13:22:22 -0800 From: Craig Sebenik <craig@netapp.com> To: freebsd-hackers@FreeBSD.ORG Subject: FWD: Re: mounting a pen drive Message-ID: <20030206132222.C9685@netapp.com>
next in thread | raw e-mail | index | archive | help
In a nutshell, I have a usb "pen drive" that I can't mount. 4.7 seems to recognize it just fine. So, it must be some silly little thing I need to do. Ideally, I would love to put a ufs filesystem on this thing as well. Any pointers would be greatly appreciated. TIA! Craig ----- Forwarded message from Daniel O'Connor <darius@dons.net.au> ----- Date: 06 Feb 2003 14:27:53 +1030 From: "Daniel O'Connor" <darius@dons.net.au> To: Craig Sebenik <craig@netapp.com> Cc: USB BSD List <usb-bsd@eleetbsd.org> Subject: Re: mounting a pen drive Content-Type: text/plain Organization: X-Mailer: Ximian Evolution 1.2.0 On Thu, 2003-02-06 at 13:08, Craig Sebenik wrote: > I have looked briefly at the FAQ and at some of the other web pages and I > can't find an explanation for how to simply mount a pen drive. > > usbdevs > addr 1: UHCI root hub, Intel > addr 2: product 0x2001, vendor 0x121e > > I tried mounting the drive with: > > > mount_msdos /dev/da0c /tmp/pen > mount_msdos: /dev/da0c: Invalid argument > > > > dmesg | grep umass > umass0: vendor 0x121e product 0x2001, rev 1.10/1.00, addr 2 > da0 at umass-sim0 bus 0 target 0 lun 0 > (da0:umass-sim0:0:0:0): READ(6)/WRITE(6) not supported, increasing minimum_cmd_size to 10. Probably worth asking on a list like freebsd-stable or -hackers. A lot of these devices need a quirk to function (ie they don't understand certain commands and will hang) If you get the quirk stuff sorted out, it should "Just Work" as a normal disk. -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 9A8C 569F 685A D928 5140 AE4B 319B 41F4 5D17 FDD5 ----- End forwarded message ----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030206132222.C9685>