Date: Tue, 5 Jun 2007 10:27:29 -0400 From: John Baldwin <jhb@freebsd.org> To: Nate Lawson <nate@root.org> Cc: freebsd-acpi@freebsd.org Subject: Re: Possible ACPI relared panic with Tyan S2720 Message-ID: <200706051027.29879.jhb@freebsd.org> In-Reply-To: <46652286.2040006@root.org> References: <20070604183419.GA73268@peter.osted.lan> <20070605043758.GA99622@peter.osted.lan> <46652286.2040006@root.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tuesday 05 June 2007 04:44:54 am Nate Lawson wrote: > Peter Holm wrote: > > On Mon, Jun 04, 2007 at 12:45:23PM -0700, Nate Lawson wrote: > >> This is a really confusing issue. All the trace you have shows is that > >> it occurs while transitioning the system from legacy to ACPI mode. > >> Unfortunately, the details of what is going on are hidden in the BIOS > >> since that write to a port triggers an SMI and the BIOS does the rest. > >> > >> However, it seems like the BIOS is reserving more memory, using memory > >> it didn't reserve, or FreeBSD is using memory we shouldn't. John, any > >> insight on the SMAP output? > >> > >>> SMAP type=01 base=0000000000000000 len=000000000009fc00 > >>> SMAP type=02 base=000000000009fc00 len=0000000000000400 > >>> SMAP type=02 base=00000000000e0000 len=0000000000020000 > >>> SMAP type=01 base=0000000000100000 len=000000003fef0000 > >>> SMAP type=03 base=000000003fff0000 len=000000000000f000 > >>> SMAP type=04 base=000000003ffff000 len=0000000000001000 > >>> SMAP type=02 base=00000000fec00000 len=0000000000100000 > >>> SMAP type=02 base=00000000fee00000 len=0000000000001000 > >>> SMAP type=02 base=00000000fff80000 len=0000000000080000 > >> Peter, can you figure out what phys address is getting overwritten? > >> Seems like it's the loader that sets up the module list and the loader's > >> allocator may be using RAM it shouldn't. > >> > > > > If I did it right (I used a vtophys() on the address): > > > > Address of mod->name(if_tun): 0xc3eed5ec, phys: 0x985ec > > So it's somewhere near 620K and the first region goes to 640K - 1 K. > The last 1 K is type 2 (reserved). Nothing seems to show why switching > to acpi mode results in an overwrite of data at 620K. I'm not sure > where to look. > > There should be some way to write a guard pattern to that area but I'll > have to think about it a bit first. Can you see if a BIOS update is > available and try it out? What about seeing if you can pre-alloc (by > hacking loader's SMAP code to reserve more of the first 640 K) and > writing a pattern there, then verifying it at various points during boot > to be sure we know exactly where the BIOS is writing? Err, the loader should not be storing modules that low. Did you kldload the module or load it via the loader? -- John Baldwin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200706051027.29879.jhb>