Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 1 Apr 2014 13:59:15 -0700 (PDT)
From:      "Chris H" <bsd-lists@bsdforge.com>
To:        "Ian Lepore" <ian@freebsd.org>
Cc:        pyunyh@gmail.com, freebsd-net <freebsd-net@freebsd.org>, freebsd-stable <freebsd-stable@freebsd.org>
Subject:   Re: miibus0: mii_mediachg: can't handle non-zero PHY instance 31
Message-ID:  <e936a36a6d3dfd72b9abed188744f3f6.authenticated@ultimatedns.net>
In-Reply-To: <41917a9e67d0f4519df4b55f3aa6ebe3.authenticated@ultimatedns.net>
References:  <2598eeb4c68e23df0789e5e3e8f46d76.authenticated@ultimatedns.net> <20140331050002.GC1359@michelle.cdnetworks.com> <c0a800d2a15f205788ed9ce606c00637.authenticated@ultimatedns.net> <20140401065842.GA1364@michelle.cdnetworks.com> <c73ef96319846b3da07db5785f48fb6a.authenticated@ultimatedns.net> <1396384167.81853.210.camel@revolution.hippie.lan> <41917a9e67d0f4519df4b55f3aa6ebe3.authenticated@ultimatedns.net>

next in thread | previous in thread | raw e-mail | index | archive | help
>> On Tue, 2014-04-01 at 13:19 -0700, Chris H wrote:
>>> [...]
>>> miibus0: <MII bus> on nfe0
>>> rlphy0: <RTL8201L 10/100 media interface> PHY 0 on miibus0
>>> rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
>>> rlphy1: <RTL8201L 10/100 media interface> PHY 1 on miibus0
>> [...]---big-snip--8<---
>>> miibus0: mii_mediachg: can't handle non-zero PHY instance 1
>>>
>>> As you can see, it looks much the same. I have no idea what
>>> I should do to better inform the driver/kernel how to better
>>> handle it. Or is it the driver, itself?
>>>
>>> Thank you again, for your thoughtful response.
>>>
>>> --Chris
>>>
>>
>> I think the way to fix a phy that responds at all addresses is to set a
>> hint in loader.conf masking out the ones that aren't real, like so:
>>
>>  hint.miibus.0.phymask="1"
>>
>> You might be able to set ="0x00000001" to make it more clear it's a
>> bitmask, but I'm not sure of that.
>
> Thank you very much for the hint. I'll give it a shot.
> Any idea why this is happening? I have 4 other MB's using the Nvidia
> chipset, and the nfe(4) driver. But they don't respond this way.
>
> Thank you again, for your helpful reply.
> I'll report back with my findings.
>
> --Chris

OK. As promised. Here's the results.
For the record, I used the following in loader.conf(5):

hint.miibus.0.phymask="0x00000001"

Here's the output (minus the sound card stuff):

Syncing disks, vnodes remaining...8 8 4 4 1 0 1 1 1 1 0 0 done
All buffers synced.
Table 'FACP' at 0x6ffa0200
Table 'APIC' at 0x6ffa0390
APIC: Found table at 0x6ffa0390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 129 ACPI ID 2: disabled
MADT: Found CPU APIC ID 130 ACPI ID 3: disabled
MADT: Found CPU APIC ID 131 ACPI ID 4: disabled
MADT: Found CPU APIC ID 132 ACPI ID 5: disabled
MADT: Found CPU APIC ID 133 ACPI ID 6: disabled
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.2-STABLE #0 r263756: Wed Mar 26 11:28:10 PDT 2014
    root@demon0:/usr/obj/usr/src/sys/DEMON0 amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81d9d000.
Preloaded elf obj module "/boot/kernel/linux.ko" at 0xffffffff81d9d200.
Preloaded elf obj module "/boot/modules/nvidia.ko" at 0xffffffff81d9db28.
Calibrating TSC clock ... TSC clock: 3231148565 Hz
CPU: AMD Sempron(tm) 140 Processor (3231.15-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x100f62  Family = 0x10  Model = 0x6  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x37fd<LAHF,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
  TSC: P-state invariant
L1 2MB data TLB: 48 entries, fully associative
L1 2MB instruction TLB: 16 entries, fully associative
L1 4KB data TLB: 48 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB data TLB: 128 entries, 2-way associative
L2 2MB instruction TLB: 0 entries, 2-way associative
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory  = 2147483648 (2048 MB)
Physical memory chunk(s):
0x0000000000010000 - 0x000000000009bfff, 573440 bytes (140 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000001dcc000 - 0x000000006cab2fff, 1791913984 bytes (437479 pages)
avail memory = 1777266688 (1694 MB)
INTR: Adding local APIC 0 as a target
Event timer "LAPIC" quality 400
ACPI APIC Table: <7309MS A7309200>
x86bios:  IVT 0x000000-0x0004ff at 0xfffffe0000000000
x86bios: SSEG 0x098000-0x098fff at 0xffffff8000226000
x86bios: EBDA 0x09f000-0x09ffff at 0xfffffe000009f000
x86bios:  ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
APIC: CPU 0 has ACPI ID 1
ULE: setup cpu 0
ACPI: RSDP 0xfaab0 00014 (v00 ACPIAM)
ACPI: RSDT 0x6ffa0000 00048 (v01 7309MS A7309200 20101122 MSFT 00000097)
ACPI: FACP 0x6ffa0200 00084 (v01 7309MS A7309200 20101122 MSFT 00000097)
ACPI: DSDT 0x6ffa04b0 0503B (v01  A7309 A7309200 00000200 INTL 20051117)
ACPI: FACS 0x6ffae000 00040
ACPI: APIC 0x6ffa0390 00090 (v01 7309MS A7309200 20101122 MSFT 00000097)
ACPI: MCFG 0x6ffa0420 0003C (v01 7309MS OEMMCFG  20101122 MSFT 00000097)
ACPI: WDRT 0x6ffa0460 00047 (v01 7309MS NV-WDRT  20101122 MSFT 00000097)
ACPI: OEMB 0x6ffae040 00072 (v01 7309MS A7309200 20101122 MSFT 00000097)
ACPI: SRAT 0x6ffaa4b0 00090 (v03 AMD    FAM_F_10 00000002 AMD  00000001)
ACPI: MSCT 0x6ffaa540 0004E (v01 A M I  OEMBOARD 00000001 AMD  00000001)
ACPI: HPET 0x6ffaa590 00038 (v01 7309MS OEMHPET0 20101122 MSFT 00000097)
ACPI: SSDT 0x6ffaa5d0 0023E (v01 A M I  POWERNOW 00000001 AMD  00000001)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
MADT: Interrupt override: source 14, irq 14
MADT: Interrupt override: source 15, irq 15
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1
feeder_rate_max=2016000 feeder_rate_round=25
wlan: <802.11 Link Layer>
kbd: new array size 4
kbd1 at kbdmux0
nfslock: pseudo-device
mem: <memory>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
cpuctl: access to MSR registers/cpuid info.
VESA: INT 0x10 vector 0xc000:0x0fd8
VESA: information block
0000   56 45 53 41 00 03 00 01 00 99 01 00 00 00 22 00
0010   00 99 00 10 61 05 07 01 00 99 1b 01 00 99 2c 01
0020   00 99 00 01 01 01 02 01 03 01 04 01 05 01 06 01
0030   07 01 0e 01 0f 01 11 01 12 01 14 01 15 01 17 01
0040   18 01 1a 01 1b 01 30 01 31 01 32 01 33 01 34 01
0050   35 01 36 01 3d 01 3e 01 45 01 46 01 47 01 48 01
0060   52 01 ff ff 00 00 00 00 00 00 00 00 00 00 00 00
0070   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0080   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0090   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0100   4e 56 49 44 49 41 00 42 75 69 6c 64 20 20 20 20
0110   30 36 31 30 31 30 2e 33 0d 0a 00 4d 43 50 36 31
0120   20 2d 20 6d 63 70 36 31 2d 38 30 00 43 68 69 70
0130   20 52 65 76 20 20 20 00 00 00 00 00 00 00 00 00
0140   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0150   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0160   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0170   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0180   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0190   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 32 mode(s) found
VESA: v3.0, 262144k memory, flags:0x1, mode table:0xffffff800025e022 (99000022)
VESA: NVIDIA
VESA: Build    061010.3
 MCP61 - mcp61-80 Chip Rev
io: <I/O>
acpi0: <7309MS A7309200> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
ACPI: Processor \134_PR_.P002 (ACPI ID 2) ignored
ACPI: Processor \134_PR_.P003 (ACPI ID 3) ignored
ACPI: Processor \134_PR_.P004 (ACPI ID 4) ignored
ACPI: Processor \134_PR_.P005 (ACPI ID 5) ignored
ACPI: Processor \134_PR_.P006 (ACPI ID 6) ignored
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 49
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 50
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff0fff on acpi0
hpet0: vendor 0x10de, rev 0x1, 25000000Hz, 3 timers, legacy route
hpet0:  t0: irqs 0x00ff3efa (31), periodic
hpet0:  t1: irqs 0x00ff3efa (31)
hpet0:  t2: irqs 0x00ff3efa (31)
Timecounter "HPET" frequency 25000000 Hz quality 950
ACPI timer: 1/2 1/1 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/3 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link8:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link9:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link10:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link11:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link12:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link13:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link14:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link15:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link16:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link17:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xd0000-0xdffff
pcib0: decoding 3 range 0x80000000-0xdfffffff
pcib0: decoding 3 range 0xf0000000-0xfed44fff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x10de, dev=0x03ea, revid=0xa1
	domain=0, bus=0, slot=0, func=0
	class=05-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03e0, revid=0xa2
	domain=0, bus=0, slot=1, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type I/O Port, range 32, base 0x4f00, size  8, enabled
pcib0: allocated type 4 (0x4f00-0x4fff) for rid 10 of pci0:0:1:0
found->	vendor=0x10de, dev=0x03eb, revid=0xa2
	domain=0, bus=0, slot=1, func=1
	class=0c-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0x4900, size  6, enabled
pcib0: allocated type 4 (0x4900-0x493f) for rid 10 of pci0:0:1:1
	map[20]: type I/O Port, range 32, base 0x4d00, size  6, enabled
pcib0: allocated type 4 (0x4d00-0x4d3f) for rid 20 of pci0:0:1:1
	map[24]: type I/O Port, range 32, base 0x4e00, size  6, enabled
pcib0: allocated type 4 (0x4e00-0x4e3f) for rid 24 of pci0:0:1:1
pcib0: matched entry for 0.1.INTA (src \134_SB_.LSMB:0)
pci_link13: Picked IRQ 20 with weight 0
pcib0: slot 1 INTA routed to irq 20 via \134_SB_.LSMB
found->	vendor=0x10de, dev=0x03f5, revid=0xa2
	domain=0, bus=0, slot=1, func=2
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0400, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03f1, revid=0xa3
	domain=0, bus=0, slot=2, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xdff7f000, size 12, enabled
pcib0: allocated type 3 (0xdff7f000-0xdff7ffff) for rid 10 of pci0:0:2:0
pcib0: matched entry for 0.2.INTA (src \134_SB_.LUB0:0)
pci_link8: Picked IRQ 21 with weight 0
pcib0: slot 2 INTA routed to irq 21 via \134_SB_.LUB0
ohci early: SMM active, request owner change
found->	vendor=0x10de, dev=0x03f2, revid=0xa3
	domain=0, bus=0, slot=2, func=1
	class=0c-03-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xdff7ec00, size  8, enabled
pcib0: allocated type 3 (0xdff7ec00-0xdff7ecff) for rid 10 of pci0:0:2:1
pcib0: matched entry for 0.2.INTB (src \134_SB_.LUB2:0)
pci_link9: Picked IRQ 22 with weight 0
pcib0: slot 2 INTB routed to irq 22 via \134_SB_.LUB2
found->	vendor=0x10de, dev=0x03f3, revid=0xa1
	domain=0, bus=0, slot=4, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0004, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x02 (500 ns)
found->	vendor=0x10de, dev=0x03f0, revid=0xa2
	domain=0, bus=0, slot=5, func=0
	class=04-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
	intpin=b, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit, vector masks
	map[10]: type Memory, range 32, base 0xdff78000, size 14, enabled
pcib0: allocated type 3 (0xdff78000-0xdff7bfff) for rid 10 of pci0:0:5:0
pcib0: matched entry for 0.5.INTB (src \134_SB_.LAZA:0)
pci_link11: Picked IRQ 23 with weight 0
pcib0: slot 5 INTB routed to irq 23 via \134_SB_.LAZA
found->	vendor=0x10de, dev=0x03ec, revid=0xa2
	domain=0, bus=0, slot=6, func=0
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	powerspec 2  supports D0 D3  current D0
pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:6:0
pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:6:0
pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:6:0
pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:6:0
	map[20]: type I/O Port, range 32, base 0xffa0, size  4, enabled
pcib0: allocated type 4 (0xffa0-0xffaf) for rid 20 of pci0:0:6:0
found->	vendor=0x10de, dev=0x03ef, revid=0xa2
	domain=0, bus=0, slot=7, func=0
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 8 messages, 64 bit, vector masks
	map[10]: type Memory, range 32, base 0xdff7d000, size 12, enabled
pcib0: allocated type 3 (0xdff7d000-0xdff7dfff) for rid 10 of pci0:0:7:0
	map[14]: type I/O Port, range 32, base 0xe480, size  3, enabled
pcib0: allocated type 4 (0xe480-0xe487) for rid 14 of pci0:0:7:0
pcib0: matched entry for 0.7.INTA (src \134_SB_.LMAC:0)
pci_link10: Picked IRQ 20 with weight 1
pcib0: slot 7 INTA routed to irq 20 via \134_SB_.LMAC
found->	vendor=0x10de, dev=0x03f6, revid=0xa2
	domain=0, bus=0, slot=8, func=0
	class=01-01-85, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 4 messages, 64 bit
	map[10]: type I/O Port, range 32, base 0xe400, size  3, enabled
pcib0: allocated type 4 (0xe400-0xe407) for rid 10 of pci0:0:8:0
	map[14]: type I/O Port, range 32, base 0xe080, size  2, enabled
pcib0: allocated type 4 (0xe080-0xe083) for rid 14 of pci0:0:8:0
	map[18]: type I/O Port, range 32, base 0xe000, size  3, enabled
pcib0: allocated type 4 (0xe000-0xe007) for rid 18 of pci0:0:8:0
	map[1c]: type I/O Port, range 32, base 0xdc00, size  2, enabled
pcib0: allocated type 4 (0xdc00-0xdc03) for rid 1c of pci0:0:8:0
	map[20]: type I/O Port, range 32, base 0xd880, size  4, enabled
pcib0: allocated type 4 (0xd880-0xd88f) for rid 20 of pci0:0:8:0
	map[24]: type Memory, range 32, base 0xdff7c000, size 12, enabled
pcib0: allocated type 3 (0xdff7c000-0xdff7cfff) for rid 24 of pci0:0:8:0
pcib0: matched entry for 0.8.INTA (src \134_SB_.LSA0:0)
pci_link15: Picked IRQ 21 with weight 1
pcib0: slot 8 INTA routed to irq 21 via \134_SB_.LSA0
found->	vendor=0x10de, dev=0x03f6, revid=0xa2
	domain=0, bus=0, slot=8, func=1
	class=01-01-85, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 4 messages, 64 bit
	map[10]: type I/O Port, range 32, base 0xd800, size  3, enabled
pcib0: allocated type 4 (0xd800-0xd807) for rid 10 of pci0:0:8:1
	map[14]: type I/O Port, range 32, base 0xd480, size  2, enabled
pcib0: allocated type 4 (0xd480-0xd483) for rid 14 of pci0:0:8:1
	map[18]: type I/O Port, range 32, base 0xd400, size  3, enabled
pcib0: allocated type 4 (0xd400-0xd407) for rid 18 of pci0:0:8:1
	map[1c]: type I/O Port, range 32, base 0xd080, size  2, enabled
pcib0: allocated type 4 (0xd080-0xd083) for rid 1c of pci0:0:8:1
	map[20]: type I/O Port, range 32, base 0xd000, size  4, enabled
pcib0: allocated type 4 (0xd000-0xd00f) for rid 20 of pci0:0:8:1
	map[24]: type Memory, range 32, base 0xdff77000, size 12, enabled
pcib0: allocated type 3 (0xdff77000-0xdff77fff) for rid 24 of pci0:0:8:1
pcib0: matched entry for 0.8.INTB (src \134_SB_.LSA1:0)
pci_link16: Picked IRQ 22 with weight 1
pcib0: slot 8 INTB routed to irq 22 via \134_SB_.LSA1
found->	vendor=0x10de, dev=0x03e8, revid=0xa2
	domain=0, bus=0, slot=9, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages, 64 bit
found->	vendor=0x10de, dev=0x03e9, revid=0xa2
	domain=0, bus=0, slot=11, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages, 64 bit
found->	vendor=0x10de, dev=0x03e9, revid=0xa2
	domain=0, bus=0, slot=12, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages, 64 bit
found->	vendor=0x10de, dev=0x03d0, revid=0xa2
	domain=0, bus=0, slot=13, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xde000000, size 24, enabled
pcib0: allocated type 3 (0xde000000-0xdeffffff) for rid 10 of pci0:0:13:0
	map[14]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled
pcib0: allocated type 3 (0xc0000000-0xcfffffff) for rid 14 of pci0:0:13:0
	map[1c]: type Memory, range 64, base 0xdd000000, size 24, enabled
pcib0: allocated type 3 (0xdd000000-0xddffffff) for rid 1c of pci0:0:13:0
pcib0: matched entry for 0.13.INTA (src \134_SB_.LMC9:0)
pci_link12: Picked IRQ 23 with weight 1
pcib0: slot 13 INTA routed to irq 23 via \134_SB_.LMC9
found->	vendor=0x1022, dev=0x1200, revid=0x00
	domain=0, bus=0, slot=24, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1201, revid=0x00
	domain=0, bus=0, slot=24, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1202, revid=0x00
	domain=0, bus=0, slot=24, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1203, revid=0x00
	domain=0, bus=0, slot=24, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1204, revid=0x00
	domain=0, bus=0, slot=24, func=4
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x4f00-0x4fff at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <nVidia nForce MCP61 USB Controller> mem 0xdff7f000-0xdff7ffff irq 21 at device 2.0
on pci0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 51
usbus0 on ohci0
usbus0: bpf attached
ohci0: usbpf: Attached
ehci0: <NVIDIA nForce MCP61 USB 2.0 controller> mem 0xdff7ec00-0xdff7ecff irq 22 at device
2.1 on pci0
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 52
ehci0: Doorbell workaround enabled
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: bpf attached
ehci0: usbpf: Attached
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   special decode    subtractive
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
hdac0: <NVIDIA MCP61 HDA Controller> mem 0xdff78000-0xdff7bfff irq 23 at device 5.0 on pci0
hdac0: PCI card vendor: 0x0888, device: 0x10ec
hdac0: HDA Driver Revision: 20120126_0002
hdac0: Config options: on=0x00000000 off=0x00000000
hdac0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 53
hdac0: using IRQ 256 for MSI
hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
atapci0: <nVidia nForce MCP61 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 6.0 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 54
ata1: <ATA channel> at channel 1 on atapci0
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 55
nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xe480-0xe487 mem 0xdff7d000-0xdff7dfff
irq 20 at device 7.0 on pci0
nfe0: attempting to allocate 8 MSI vectors (8 supported)
msi: routing MSI IRQ 257 to local APIC 0 vector 56
msi: routing MSI IRQ 258 to local APIC 0 vector 57
msi: routing MSI IRQ 259 to local APIC 0 vector 58
msi: routing MSI IRQ 260 to local APIC 0 vector 59
msi: routing MSI IRQ 261 to local APIC 0 vector 60
msi: routing MSI IRQ 262 to local APIC 0 vector 61
msi: routing MSI IRQ 263 to local APIC 0 vector 62
msi: routing MSI IRQ 264 to local APIC 0 vector 63
nfe0: using IRQs 257-264 for MSI
nfe0: Using 8 MSI messages
miibus0: <MII bus> on nfe0
rlphy0: <RTL8201L 10/100 media interface> PHY 0 on miibus0
rlphy0: OUI 0x000004, model 0x0020, rev. 1
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
nfe0: bpf attached
nfe0: Ethernet address: 40:61:86:cd:44:97
atapci1: <nVidia nForce MCP61 SATA300 controller> port
0xe400-0xe407,0xe080-0xe083,0xe000-0xe007,0xdc00-0xdc03,0xd880-0xd88f mem
0xdff7c000-0xdff7cfff irq 21 at device 8.0 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
atapci2: <nVidia nForce MCP61 SATA300 controller> port
0xd800-0xd807,0xd480-0xd483,0xd400-0xd407,0xd080-0xd083,0xd000-0xd00f mem
0xdff77000-0xdff77fff irq 22 at device 8.1 on pci0
ata4: <ATA channel> at channel 0 on atapci2
ata5: <ATA channel> at channel 1 on atapci2
pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
vgapci0: <VGA-compatible display> mem
0xde000000-0xdeffffff,0xc0000000-0xcfffffff,0xdd000000-0xddffffff irq 23 at device 13.0 on
pci0
nvidia0: <GeForce 6150SE nForce 430> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 64
vgapci0: Boot video device
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb3
amdtemp0: Found 1 cores and 1 sensors.
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 65
uart0: fast interrupt
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 66
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x83ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 67
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 68
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
acpi0: wakeup code va 0xffffff80003d3000 pa 0x90000
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 1 of orm0
pcib0: allocated type 3 (0xda000-0xda7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xda800-0xdafff) for rid 1 of orm0
pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 1 of orm0
pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 1 of orm0
pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdd800-0xddfff) for rid 1 of orm0
pcib0: allocated type 3 (0xde000-0xde7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xde800-0xdefff) for rid 1 of orm0
pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdf800-0xdffff) for rid 1 of orm0
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
wbwd0 failed to probe on isa0
isa_probe_children: probing PnP devices
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 119672206 Hz
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
Linux ELF exec handler installed
lo0: bpf attached
hdacc0: <Realtek ALC888 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0
hdaa0: Subsystem ID: 0x14627309
hdaa0: NumGPIO=2 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1
[...][---8<---]
hdaa0:
pcm0: <Realtek ALC888 (Rear Analog)> at nid 20 and 24,26 on hdaa0
[...][---8<---]
pcm0: sndbuf_setmap 3480000, 10000; 0xffffff806bb5c000 -> 3480000
pcm1: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa0
[...][---8<---]
pcm1: sndbuf_setmap 2780000, 10000; 0xffffff808473c000 -> 2780000
pcm2: <Realtek ALC888 (Rear Digital)> at nid 30 on hdaa0
[...][--8<---]
pcm2: sndbuf_setmap 27c0000, 10000; 0xffffff808477c000 -> 27c0000
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
(aprobe0:ata0:0:1:0): Spinning up device
(aprobe0:ata0:0:1:0): Spin-up done
uhub0: 10 ports with 10 removable, self powered
ata2: SATA connect timeout status=00000000
ata3: SATA connect timeout status=00000000
ata4: SATA connect timeout status=00000000
ata5: SATA connect timeout status=00000000
pass0 at ata0 bus 0 scbus0 target 0 lun 0
pass0: <Maxtor 2B020H1 WAH21PB0> ATA-6 device
pass0: Serial Number M1000000
pass0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
pass1 at ata0 bus 0 scbus0 target 1 lun 0
pass1: <IC35L040AVVN07-0 VA2OAG0A> ATA-5 device
pass1: Serial Number VNP214B2T59A5E
pass1: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <Maxtor 2B020H1 WAH21PB0> ATA-6 device
ada0: Serial Number M1000000
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 19541MB (40020624 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
ada1 at ata0 bus 0 scbus0 target 1 lun 0
ada1: <IC35L040AVVN07-0 VA2OAG0A> ATA-5 device
ada1: Serial Number VNP214B2T59A5E
ada1: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada1: 39266MB (80418240 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad1
GEOM: new disk ada0
GEOM: new disk ada1
TSC timecounter discards lower 1 bit(s)
Timecounter "TSC-low" frequency 1615574282 Hz quality 1000
uhub1: 10 ports with 10 removable, self powered
Trying to mount root from ufs:/dev/ada0s1a [rw]...
start_init: trying /sbin/init
linprocfs registered

Thanks Ian! As you can see, I am no longer spammed with the 30+
extraneous lines. Oh, and yes, the network still functions. :)

Be interesting to know why the difference. I've been using
nfe(4) for years, and never ran into anything similar.
FWIW, the MB is an MSI K9N6PGM2-V2. Not very new. But something
I had handy for testing newer versions of FreeBSD on, and
experimenting with different CPU's.

Thank you again, for providing the (apparent) solution.

--Chris

>
>>
>> -- Ian
>>
>>
>>
>
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?e936a36a6d3dfd72b9abed188744f3f6.authenticated>