Date: Wed, 5 Feb 2003 09:17:47 +0100 (CET) From: Gerhard Schmidt <estartu@ze.tum.de> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/47939: 5.0-Current freezes when bktr device is opened Message-ID: <200302050817.h158Hllj000664@mimas.ze.tu-muenchen.de>
next in thread | raw e-mail | index | archive | help
>Number: 47939 >Category: kern >Synopsis: 5.0-Current freezes when bktr device is opened >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Feb 05 00:20:05 PST 2003 >Closed-Date: >Last-Modified: >Originator: Gerhard Schmidt >Release: FreeBSD 5.0-CURRENT i386 >Organization: Technische Universität München >Environment: System: FreeBSD mimas.ze.tu-muenchen.de 5.0-CURRENT FreeBSD 5.0-CURRENT #1: Tue Feb 4 14:17:28 CET 2003 root@mimas.ze.tu-muenchen.de:/usr/obj/usr/src/sys/MIMAS i386 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #1: Tue Feb 4 14:17:28 CET 2003 root@mimas.ze.tu-muenchen.de:/usr/obj/usr/src/sys/MIMAS Preloaded elf kernel "/boot/kernel/kernel" at 0xc04f8000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04f80a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 300683260 Hz CPU: Pentium II/Pentium II Xeon/Celeron (300.68-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x634 Stepping = 4 Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX> real memory = 150982656 (143 MB) avail memory = 141295616 (134 MB) Initializing GEOMetry subsystem Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <ASUS P2L97-S > on motherboard ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 Using $PIR table, 7 entries at 0xc00f0ce0 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-safe" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_cpu0: <CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82443LX (440 LX) host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xd800-0xd80f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f irq 5 at device 4.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered intpm0: <Intel 82371AB Power management controller> port 0xe800-0xe80f irq 9 at device 4.3 on pci0 intpm0: I/O mapped e800 intpm0: intr IRQ 9 enabled revision 0 smbus0: <System Management Bus> on intsmb0 smb0: <SMBus generic I/O> on smbus0 intpm0: PM I/O mapped e400 ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xd000-0xd0ff mem 0xdf800000-0xdf800fff irq 5 at device 6.0 on pci0 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xb800-0xb87f mem 0xdf000000-0xdf00007f irq 5 at device 9.0 on pci0 xl0: Ethernet address: 00:02:1e:f2:88:43 miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bktr0: <BrookTree 878> mem 0xe2000000-0xe2000fff irq 12 at device 10.0 on pci0 bktr0: Hauppauge Model 38074 B421 bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, remote control. pci0: <multimedia> at device 10.1 (no driver attached) fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb400-0xb43f mem 0xde000000-0xde01ffff,0xde800000-0xde800fff irq 10 at device 11.0 on pci0 fxp0: Ethernet address 00:02:b3:b6:0c:2d inphy0: <i82555 10/100 media interface> on miibus1 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0 port 0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 orm0: <Option ROMs> at iomem 0xd0000-0xd47ff,0xcc000-0xcd7ff,0xc8000-0xc87ff,0xc0000-0xc7fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec Waiting 5 seconds for SCSI devices to settle acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% sa0 at ahc0 bus 0 target 4 lun 0 sa0: <HP C1533A A612> Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 15) da0 at ahc0 bus 0 target 0 lun 0 da0: <IBM DDRS-39130W S92A> Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C) >Description: When I start any Application using the bktr driver to access my WinTV Card the Box freezes. No Panik, No debugger. It just stop. >How-To-Repeat: Start a Application to access the WinTV Card >Fix: unknown >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200302050817.h158Hllj000664>