Date: Sat, 09 Feb 2013 10:47:46 +0200 From: Ian FREISLICH <ianf@clue.co.za> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-current@freebsd.org Subject: Re: uath panic on insert. Message-ID: <E1U4667-0003Jw-1f@clue.co.za> In-Reply-To: <201302082353.13581.hselasky@c2i.net> References: <201302082353.13581.hselasky@c2i.net> <201302082218.24033.hselasky@c2i.net> <E1U3sZh-0000aA-Kx@clue.co.za> <E1U3vj4-0001px-1D@clue.co.za>
next in thread | previous in thread | raw e-mail | index | archive | help
Hans Petter Selasky wrote: > On Friday 08 February 2013 22:43:17 Ian FREISLICH wrote: > > Hans Petter Selasky wrote: > > > Hi, > > > > > > Your problem should be fixed by: > > > http://svnweb.freebsd.org/changeset/base/246565 > > > > > > Please test and report back if it doesn't. > > > > It doesn't panic anymore. Thanks. There's a new problem though: > > > > uath0: <Atheros Communications Inc USB WLAN Device, rev 2.00/0.01, addr 5> > > on usbus1 wlan1: Ethernet address: 00:11:95:d3:4a:af > > Hi, > > Can you try this patch: > http://svnweb.freebsd.org/changeset/base/246570 ugen1.5: <Atheros Communications Inc> at usbus1 <Atheros Communications Inc USB WLAN Device, rev 2.00/0.01, addr 5> on usbus1 Ethernet address: 00:11:95:d3:4a:af uath_cmdsend: empty inactive queue could not init Tx queues, error 55 uath_cmdsend: empty inactive queue could not set channel, error 55 uath_cmdsend: empty inactive queue could not set channel, error 55 uath_cmdsend: empty inactive queue could not set channel, error 55 uath_cmdsend: empty inactive queue could not set channel, error 55 uath_cmdsend: empty inactive queue could not set channel, error 55 at uhub2, port 2, addr 5 (disconnected) <--- uath_cmdsend: empty inactive queue uath_cmdsend: empty inactive queue ugen1.5: <Atheros Communications Inc> at usbus1 (disconnected) The card still disconnects after attempting to scan unsupported frequencies. The sequence above happens when I 'ifconfig wlan1 up'. Also, the uath driver reports 2.4GHz and 5GHz as supported channels for this chip but it's a D-Link DWL-G132 which is a 2.4GHz device. Is this a problem for Adrian to look at? Ian -- Ian Freislich
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1U4667-0003Jw-1f>