Date: Thu, 2 Jul 1998 09:45:02 -0400 (EDT) From: The Hermit Hacker <scrappy@hub.org> To: scsi@FreeBSD.ORG Subject: Drive blew up... Message-ID: <Pine.BSF.3.96.980702094239.577A-100000@hub.org>
next in thread | raw e-mail | index | archive | help
Morning... This morning, I came into alot of SCSI errors, and a bad hard drive...I'm just curious as to whether I might be mis-diagnosing, since there was nothing to indicate a problem...it just died. Basically, is it possible its the controller and not the drive, or definitively just the drive? Thanks... Here is what is in my current dmesg, or part of it: (da2:ahc1:0:1:0): Queuing a BDR SCB (da2:ahc1:0:1:0): Bus Device Reset Message Sent (da2:ahc1:0:1:0): no longer in timeout, status = 34b ahc1: Bus Device Reset Sent. 1 SCBs aborted (da2:ahc1:0:1:0): READ(06). CDB: 8 0 0 40 70 0 (da2:ahc1:0:1:0): UNIT ATTENTION asc:29,3 (da2:ahc1:0:1:0): Bus device reset function occurred (da2:ahc1:0:1:0): READ(06). CDB: 8 0 0 75 1 0 (da2:ahc1:0:1:0): MEDIUM ERROR info:75 csi:0,2c,0,76 asc:15,2 (da2:ahc1:0:1:0): Positioning error detected by read of medium sks:80,80 (da2:ahc1:0:1:0): READ(06). CDB: 8 0 0 79 1 0 (da2:ahc1:0:1:0): MEDIUM ERROR info:79 csi:0,2c,0,7a asc:15,2 (da2:ahc1:0:1:0): Positioning error detected by read of medium sks:80,80 (da2:ahc1:0:1:0): SCB 0x7 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0 SEQADDR == 0xb SSTAT1 == 0xa (da2:ahc1:0:1:0): Queuing a BDR SCB (da2:ahc1:0:1:0): Bus Device Reset Message Sent (da2:ahc1:0:1:0): no longer in timeout, status = 34b ahc1: Bus Device Reset Sent. 1 SCBs aborted (da2:ahc1:0:1:0): READ(06). CDB: 8 0 0 b0 70 0 (da2:ahc1:0:1:0): UNIT ATTENTION asc:29,3 (da2:ahc1:0:1:0): Bus device reset function occurred (da2:ahc1:0:1:0): SCB 0x7 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0 SEQADDR == 0x8 SSTAT1 == 0xa (da2:ahc1:0:1:0): Queuing a BDR SCB (da2:ahc1:0:1:0): Bus Device Reset Message Sent (da2:ahc1:0:1:0): SCB 0x7 - timed out in message out phase, SCSISIGI == 0xa4 SEQADDR == 0x154 SSTAT1 == 0x2 (da2:ahc1:0:1:0): no longer in timeout, status = 34b ahc1: Issued Channel A Bus Reset. 1 SCBs aborted (da1:ahc1:0:0:0): WRITE(10). CDB: 2a 0 0 27 40 e0 0 0 10 0 (da1:ahc1:0:0:0): UNIT ATTENTION asc:29,2 (da1:ahc1:0:0:0): Scsi bus reset occurred (da2:ahc1:0:1:0): READ(06). CDB: 8 0 1 12 1 0 (da2:ahc1:0:1:0): UNIT ATTENTION asc:29,2 (da2:ahc1:0:1:0): Scsi bus reset occurred To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980702094239.577A-100000>