Date: Tue, 23 Jul 2002 14:50:05 -0700 (PDT) From: Damon Anton Permezel <dap@damon.com> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/38894: Dell PowerEdge 4600 PCI Bus scan problems Message-ID: <200207232150.g6NLo5ar059262@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/38894; it has been noted by GNATS. From: Damon Anton Permezel <dap@damon.com> To: Andrew Gallatin <gallatin@cs.duke.edu> Cc: Jung-uk Kim <jkim@niksun.com>, freebsd-gnats-submit@FreeBSD.org Subject: Re: kern/38894: Dell PowerEdge 4600 PCI Bus scan problems Date: Tue, 23 Jul 2002 16:47:21 -0500 On Tue, Jul 23, 2002 at 05:15:52PM -0400, Andrew Gallatin wrote: > > Damon Anton Permezel writes: > > On Tue, Jul 23, 2002 at 03:15:29PM -0400, Andrew Gallatin wrote: > > > > > > Jung-uk Kim writes: > > > > Following patch says 0x02011166 is host to PCI bridge but it is not. It > > > > is a southbridge. > > > > > > > > http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/i386/pci/pci_bus.c.diff?r1=1.81&r2=1.82 > > > > > > > > My SuperMicro P4DSE motherboard says: > > > > > > > > isab0@pci0:15:0: class=0x060100 card=0x405515d9 chip=0x02011166 > > > > rev=0x93 hdr=0x00 > > > > > > > > > > I was afraid of that.. > > > > > > Damon, > > Well, class=0x060100 is definately an ISA bridge. So I think we're > going to have to start looking at the class codes. > > Perhaps the host bridge is at another function on the same device? > Can you both me the output of 'pciconf -lv' on your systems, please? > > Are you both willing to test patches? At least one of us is. chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x00111166 rev=0x22 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CMIC-HE' class = bridge subclass = HOST-PCI chip1@pci0:0:1: class=0x060000 card=0x00000000 chip=0x00111166 rev=0x00 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CMIC-HE' class = bridge subclass = HOST-PCI chip2@pci0:0:2: class=0x060000 card=0x00000000 chip=0x00111166 rev=0x00 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CMIC-HE' class = bridge subclass = HOST-PCI chip3@pci0:0:3: class=0x060000 card=0x00000000 chip=0x00111166 rev=0x00 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CMIC-HE' class = bridge subclass = HOST-PCI fxp0@pci0:4:0: class=0x020000 card=0x01061028 chip=0x12298086 rev=0x08 hdr=0x00 vendor = 'Intel Corporation' device = '82557/8/9 EtherExpress PRO/100(B) Ethernet Adapter' class = network subclass = ethernet ahc0@pci0:6:0: class=0x010000 card=0x01061028 chip=0x001f9005 rev=0x01 hdr=0x00 vendor = 'Adaptec' device = 'AHA-2940U2/AHA-2940U2W AIC-7890/1 Ultra2 SCSI Controller' class = mass storage subclass = SCSI ahc1@pci0:8:0: class=0x010000 card=0x00000000 chip=0x81789004 rev=0x00 hdr=0x00 vendor = 'Adaptec Inc' device = 'AHA-2940U/UW/2940D Ultra/Ultra Wide/Dual SCSI Host Adapter' class = mass storage subclass = SCSI none0@pci0:14:0: class=0x030000 card=0x01061028 chip=0x47521002 rev=0x27 hdr=0x00 vendor = 'ATI Technologies' device = 'Rage XL PCI' class = display subclass = VGA chip4@pci0:15:0: class=0x060000 card=0x02011166 chip=0x02011166 rev=0x93 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CSB5 PCI to ISA Bridge' class = bridge subclass = HOST-PCI atapci0@pci0:15:1: class=0x010182 card=0x02121166 chip=0x02121166 rev=0x93 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CSB5 PCI EIDE Controller' class = mass storage subclass = ATA ohci0@pci0:15:2: class=0x0c0310 card=0x02201166 chip=0x02201166 rev=0x05 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'OSB4 OpenHCI Compliant USB Controller' class = serial bus subclass = USB isab0@pci0:15:3: class=0x060100 card=0x02301166 chip=0x02251166 rev=0x00 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' class = bridge subclass = PCI-ISA chip5@pci0:16:0: class=0x060000 card=0x00000000 chip=0x00101166 rev=0x03 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CIOB30' class = bridge subclass = HOST-PCI chip6@pci0:16:2: class=0x060000 card=0x00000000 chip=0x00101166 rev=0x03 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CIOB30' class = bridge subclass = HOST-PCI chip7@pci0:17:0: class=0x060000 card=0x00000000 chip=0x00101166 rev=0x03 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CIOB30' class = bridge subclass = HOST-PCI chip8@pci0:17:2: class=0x060000 card=0x00000000 chip=0x00101166 rev=0x03 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CIOB30' class = bridge subclass = HOST-PCI bge0@pci1:6:0: class=0x020000 card=0x01061028 chip=0x164414e4 rev=0x14 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM5700/1 Gigabit Ethernet Controller' class = network subclass = ethernet pcib5@pci1:8:0: class=0x060400 card=0x00000068 chip=0x03098086 rev=0x01 hdr=0x01 vendor = 'Intel Corporation' device = '80303 I/O Processor PCI-to-PCI Bridge Unit' class = bridge subclass = PCI-PCI aac0@pci1:8:1: class=0x010400 card=0x01061028 chip=0x000a1028 rev=0x01 hdr=0x00 vendor = 'Dell Computer Corporation' device = 'PowerEdge 3/Di Expandable RAID Controller' class = mass storage subclass = RAID none1@pci2:6:0: class=0x010000 card=0x00c51028 chip=0x00c59005 rev=0x01 hdr=0x00 vendor = 'Adaptec' device = 'RAID Subsystem HBA' class = mass storage subclass = SCSI none2@pci2:6:1: class=0x010000 card=0x00c51028 chip=0x00c59005 rev=0x01 hdr=0x00 vendor = 'Adaptec' device = 'RAID Subsystem HBA' class = mass storage subclass = SCSI none3@pci9:6:0: class=0x020000 card=0x11078086 chip=0x10088086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82544 PRO/1000 Gigabit Ethernet Controller' class = network subclass = ethernet pcib6@pci3:6:0: class=0x060400 card=0x00000068 chip=0xa5001044 rev=0x02 hdr=0x01 vendor = 'Adaptec (Formerly: Distributed Processing Technology (DPT))' device = 'PCI Bridge' class = bridge subclass = PCI-PCI asr0@pci3:6:1: class=0x0e0001 card=0xc03c1044 chip=0xa5011044 rev=0x02 hdr=0x00 vendor = 'Adaptec (Formerly: Distributed Processing Technology (DPT))' device = 'I2O SmartRAID V Controller' isp0@pci3:8:0: class=0x010000 card=0x00021077 chip=0x22001077 rev=0x05 hdr=0x00 vendor = 'Q Logic' device = 'ISP2200' class = mass storage subclass = SCSI bge1@pci14:6:0: class=0x020000 card=0x000814e4 chip=0x164514e4 rev=0x15 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM5701 NetXtreme Gigabit Ethernet' class = network subclass = ethernet Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6-STABLE #16: Sun Jul 21 16:47:14 CDT 2002 dap@damon.com:/usr/obj/usr/src/sys/FUBAR Calibrating clock(s) ... TSC clock: 1984675976 Hz, i8254 clock: 1193326 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 1984489484 Hz CPU: Pentium 4 (1984.49-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC> real memory = 536805376 (524224K bytes) Physical memory chunk(s): 0x00001000 - 0x0009ffff, 651264 bytes (159 pages) 0x00410000 - 0x1ffe7fff, 532512768 bytes (130008 pages) avail memory = 518557696 (506404K bytes) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xc67e pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 Other BIOS signatures found: ACPI: 000fdc60 Preloaded elf kernel "kernel" at 0xc03e9000. md0: Malloc disk Creating DISK md0 pci_open(1): mode 1 addr port (0x0cf8) is 0x800078ac pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00111166) Using $PIR table, 13 entries at 0xc00fc140 pcib-: pcib1 exists, using next available unit number pcib-: pcib1 exists, using next available unit number pcib-: pcib3 exists, using next available unit number pcib-: pcib9 exists, using next available unit number npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <ServerWorks CMIC-HE> on motherboard found-> vendor=0x1166, dev=0x0011, revid=0x22 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0011, revid=0x00 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0011, revid=0x00 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0011, revid=0x00 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x1229, revid=0x08 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base fe204000, size 12 map[14]: type 1, range 32, base 0000ecc0, size 6 map[18]: type 1, range 32, base fe000000, size 20 found-> vendor=0x9005, dev=0x001f, revid=0x01 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base 0000e800, size 8 map[14]: type 1, range 64, base fe203000, size 12 found-> vendor=0x9004, dev=0x8178, revid=0x00 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000e400, size 8 map[14]: type 1, range 32, base fe202000, size 12 found-> vendor=0x1002, dev=0x4752, revid=0x27 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base fd000000, size 24 map[14]: type 1, range 32, base 0000e000, size 8 map[18]: type 1, range 32, base fe201000, size 12 found-> vendor=0x1166, dev=0x0201, revid=0x93 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0212, revid=0x93 class=01-01-82, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base 000008c0, size 3 map[14]: type 3, range 32, base 000008c8, size 2 map[18]: type 1, range 32, base 000008d0, size 3 map[1c]: type 3, range 32, base 000008d8, size 2 map[20]: type 1, range 32, base 000008b0, size 4 found-> vendor=0x1166, dev=0x0220, revid=0x05 class=0c-03-10, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base fe200000, size 12 found-> vendor=0x1166, dev=0x0225, revid=0x00 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0010, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0010, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0010, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0010, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 pci0: <PCI bus> on pcib0 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xecc0-0xecff mem 0xfe000000-0xfe0fffff,0xfe204000-0xfe204fff irq 11 at device 4.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:06:5b:88:18:bc fxp0: PCI IDs: 8086 1229 1028 0106 0008 fxp0: Dynamic Standby mode is disabled inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp0 attached ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xe800-0xe8ff mem 0xfe203000-0xfe203fff irq 10 at device 6.0 on pci0 ahc0: Reading SEEPROM...done. ahc0: Manual LVD Termination ahc0: BIOS eeprom is present ahc0: Secondary High byte termination Enabled ahc0: Secondary Low byte termination Enabled ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: Downloading Sequencer Program... 416 instructions downloaded aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec 2940 Ultra SCSI adapter> port 0xe400-0xe4ff mem 0xfe202000-0xfe202fff irq 11 at device 8.0 on pci0 ahc1: Reading SEEPROM...done. ahc1: internal 50 cable not present, internal 68 cable not present ahc1: external cable not present ahc1: BIOS eeprom is present ahc1: High byte termination Enabled ahc1: Low byte termination Enabled ahc1: Downloading Sequencer Program... 439 instructions downloaded using shared irq11. aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs pci0: <ATI Mach64-GR graphics accelerator> (vendor=0x1002, dev=0x4752) at 14.0 atapci0: <ServerWorks CSB5 ATA100 controller> port 0x8b0-0x8bf,0x8d8-0x8db,0x8d0-0x8d7,0x8c8-0x8cb,0x8c0-0x8c7 at device 15.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x08b0 ata0: mask=03 ostat0=50 ostat2=01 ata0-master: ATAPI 14 eb ata0-slave: ATAPI 14 eb ata0: mask=03 stat0=00 stat1=01 ata0: devices=0c ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x08b8 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfe200000-0xfe200fff irq 5 at device 15.2 on pci0 ohci0: (New OHCI DeviceId=0x02201166) ohci_init: start usb0: OHCI version 1.0, legacy support ohci_init: SMM active, request owner change usb0: SMM does not respond, resetting usb0: resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered isab0: <PCI to ISA bridge (vendor=1166 device=0225)> at device 15.3 on pci0 isa0: <ISA bus> on isab0 pcib1: <ServerWorks CMIC-HE> on motherboard found-> vendor=0x14e4, dev=0x1644, revid=0x14 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 64, base fcf00000, size 16 found-> vendor=0x8086, dev=0x0309, revid=0x01 class=06-04-00, hdrtype=0x01, mfdev=1 subordinatebus=2 secondarybus=2 found-> vendor=0x1028, dev=0x000a, revid=0x01 class=01-04-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base f0000000, size 27 pci1: <PCI bus> on pcib1 bge0: <Broadcom BCM5700 Gigabit Ethernet> mem 0xfcf00000-0xfcf0ffff irq 10 at device 6.0 on pci1 using shared irq10. bge0: Ethernet address: 00:06:5b:88:18:bd miibus1: <MII bus> on bge0 brgphy0: <BCM5401 10/100/1000baseTX PHY> on miibus1 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bpf: bge0 attached pcib5: <PCI to PCI bridge (vendor=8086 device=0309)> at device 8.0 on pci1 found-> vendor=0x9005, dev=0x00c5, revid=0x01 class=01-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000dc00, size 8 map[14]: type 1, range 64, base fcdff000, size 12 found-> vendor=0x9005, dev=0x00c5, revid=0x01 class=01-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=b, irq=10 map[10]: type 1, range 32, base 0000d800, size 8 map[14]: type 1, range 64, base fcdfe000, size 12 pci2: <PCI bus> on pcib5 pci2: <unknown card> (vendor=0x9005, dev=0x00c5) at 6.0 irq 11 pci2: <unknown card> (vendor=0x9005, dev=0x00c5) at 6.1 irq 10 aac0: <Dell PERC 3/Di> mem 0xf0000000-0xf7ffffff irq 11 at device 8.1 on pci1 aac0: i960RX 100MHz, 118MB cache memory, optional battery present aac0: Kernel 2.7-0, Build 3153, S/N b821d3 pcib9: <ServerWorks CMIC-HE> on motherboard found-> vendor=0x8086, dev=0x1008, revid=0x02 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 64, base ebf20000, size 17 map[18]: type 1, range 64, base ebf00000, size 17 map[20]: type 1, range 32, base 00008ce0, size 5 pci9: <PCI bus> on pcib9 pci9: <unknown card> (vendor=0x8086, dev=0x1008) at 6.0 irq 11 pcib255: <ServerWorks CMIC-HE> on motherboard pci255: <PCI bus> on pcib255 pci-: pci2 exists, using next available unit number pcib2: <ServerWorks host to PCI bridge> on motherboard found-> vendor=0x1044, dev=0xa500, revid=0x02 class=06-04-00, hdrtype=0x01, mfdev=1 subordinatebus=4 secondarybus=4 found-> vendor=0x1044, dev=0xa501, revid=0x02 class=0e-00-01, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base ec000000, size 25 found-> vendor=0x1077, dev=0x2200, revid=0x05 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base 0000bc00, size 8 map[14]: type 1, range 32, base eff00000, size 12 pci3: <PCI bus> on pcib2 pcib6: <PCI to PCI bridge (vendor=1044 device=a500)> at device 6.0 on pci3 pci4: <PCI bus> on pcib6 asr0: <Adaptec Caching SCSI RAID> mem 0xec000000-0xedffffff irq 11 at device 6.1 on pci3 asr0: major=154 asr0: ADAPTEC 2100S FW Rev. 370F, 1 channel, 256 CCBs, Protocol I2O Qlogic ISP Driver, FreeBSD Version 4.16, Core Version 2.6 isp0: <Qlogic ISP 2200 PCI FC-AL Adapter> port 0xbc00-0xbcff mem 0xeff00000-0xeff00fff irq 10 at device 8.0 on pci3 isp0: using I/O space register mapping isp0: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.1.36 isp0: Installed in 64-Bit PCI slot isp0: Last F/W revision was 2.0.27 isp0: 985 max I/O commands supported isp0: NVRAM Port WWN 0x210000e08b01138a pci-: pci3 exists, using next available unit number pcib3: <ServerWorks host to PCI bridge> on motherboard pci5: <PCI bus> on pcib3 pci-: pci4 exists, using next available unit number pcib4: <ServerWorks host to PCI bridge> on motherboard pci6: <PCI bus> on pcib4 pcib10: <ServerWorks host to PCI bridge> on motherboard pci10: <PCI bus> on pcib10 pcib14: <ServerWorks host to PCI bridge> on motherboard found-> vendor=0x14e4, dev=0x1645, revid=0x15 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 64, base ead00000, size 16 pci14: <PCI bus> on pcib14 bge1: <Broadcom BCM5701 Gigabit Ethernet> mem 0xead00000-0xead0ffff irq 10 at device 6.0 on pci14 bge1: Ethernet address: 00:10:18:02:2c:d8 miibus2: <MII bus> on bge1 brgphy1: <BCM5701 10/100/1000baseTX PHY> on miibus2 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bpf: bge1 attached ata-: ata0 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcc7ff,0xd4000-0xd9fff,0xda000-0xda7ff,0xec000-0xeffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 psm0: failed to reset the aux device. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port isa_probe_children: probing PnP devices BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 3:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached Linux ELF exec handler installed ata0-slave: ATAPI identify retries exceeded ata0-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata0-master: success setting PIO4 on generic chip acd0: <LG DVD-ROM DRN-8080B/2.13> DVD-ROM drive at ata0 as master acd0: 512KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-ROM 120mm data disc (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. aacd0: <RAID 5> on aac0 aacd0: 32768MB (67108992 sectors) Creating DISK aacd0 aacd1: <RAID 5> on aac0 aacd1: 32768MB (67108992 sectors) Creating DISK aacd1 aacd2: <RAID 5> on aac0 aacd2: 38601MB (79056000 sectors) Creating DISK aacd2 isp0: Firmware State <Config Wait->Loss Of Sync> (ahc0:A:6:0): Sending WDTR 1 (ahc0:A:6:0): Received WDTR 1 filtered to 1 ahc0: target 6 using 16bit transfers (ahc0:A:6:0): Sending SDTR period a, offset 7f (ahc0:A:6:0): Received SDTR period a, offset 20 Filtered to period a, offset 20 ahc0: target 6 synchronous at 40.0MHz, offset = 0x20 (ahc0:A:6:0): Sending WDTR 1 (ahc0:A:6:0): Received WDTR 1 filtered to 1 ahc0: target 6 using asynchronous transfers (ahc0:A:6:0): Sending SDTR period a, offset 20 (ahc0:A:6:0): Received SDTR period a, offset 20 Filtered to period a, offset 20 ahc0: target 6 synchronous at 40.0MHz, offset = 0x20 Creating DISK da0 sa0 at ahc0 bus 0 target 6 lun 0 sa0: <ARCHIVE Python 06408-XXX 9050> Removable Sequential Access SCSI-3 device sa0: Serial Number HN019LL sa0: 80.000MB/s transfers (40.000MHz, offset 32, 16bit) pass0 at ahc0 bus 0 target 6 lun 0 pass0: <ARCHIVE Python 06408-XXX 9050> Removable Sequential Access SCSI-3 device pass0: Serial Number HN019LL pass0: 80.000MB/s transfers (40.000MHz, offset 32, 16bit) pass1 at asr0 bus 0 target 8 lun 0 pass1: <ADAPTEC RAID-5 370F> Fixed Direct Access SCSI-2 device pass1: Serial Number + pass1: Tagged Queueing Enabled da0 at asr0 bus 0 target 8 lun 0 da0: <ADAPTEC RAID-5 370F> Fixed Direct Access SCSI-2 device da0: Serial Number + da0: Tagged Queueing Enabled da0: 26283MB (53827584 512 byte sectors: 255H 63S/T 3350C) Mounting root from ufs:/dev/aacd0s1a aacd0s1: type 0xa5, start 63, end = 67103504, size 67103442 : OK start_init: trying /sbin/init da0s1: type 0xa5, start 63, end = 26908874, size 26908812 : OK da0s2: type 0xa5, start 26908875, end = 53817749, size 26908875 : OK aacd1s1: type 0xa5, start 63, end = 67103504, size 67103442 : OK aacd2s1: type 0xa5, start 63, end = 79055864, size 79055802 : OK aacd1s1: type 0xa5, start 63, end = 67103504, size 67103442 : OK aacd1s1: type 0xa5, start 63, end = 67103504, size 67103442 : OK aacd2s1: type 0xa5, start 63, end = 79055864, size 79055802 : OK da0s1: type 0xa5, start 63, end = 26908874, size 26908812 : OK da0s2: type 0xa5, start 26908875, end = 53817749, size 26908875 : OK splash: image decoder found: logo_saver bge0: gigabit link up bge0: gigabit link up fxp0: promiscuous mode enabled fxp0: promiscuous mode disabled fxp0: promiscuous mode enabled fxp0: promiscuous mode disabled fxp0: promiscuous mode enabled fxp0: promiscuous mode disabled fxp0: promiscuous mode enabled fxp0: promiscuous mode disabled fxp0: promiscuous mode enabled fxp0: promiscuous mode disabled To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200207232150.g6NLo5ar059262>