Date: Thu, 20 Dec 2001 20:17:53 +0100 From: "Petr Holub" <hopet@ics.muni.cz> To: <freebsd-hackers@FreeBSD.ORG> Subject: RE: tx driver Message-ID: <000301c1898b$06160390$50eb6cc2@kloboucek> In-Reply-To: <20011219160400.A91151@kudra.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0004_01C18993.67DBF230
Content-Type: text/plain;
charset="ISO-8859-1"
Content-Transfer-Encoding: 7bit
> You should send a kernel config to the list.
> It might be mbuf starvtion, but that doesn't sound like a driver
> specific problem.
OK. dmesg from boot -v and kernel config is in the attachement.
Thanks,
Petr
================================================================
Petr Holub
CESNET z.s.p.o. Supercomputing Center Brno
Zikova 2 Institute of Compt. Science
10200 Praha, CZ Masaryk University
Czech Republic Botanicka 68a, 60200 Brno, CZ
e-mail: Petr.Holub@cesnet.cz phone: +420-5-41512278
e-mail: hopet@ics.muni.cz
------=_NextPart_000_0004_01C18993.67DBF230
Content-Type: application/octet-stream;
name="dmesg.EVENSTAR"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg.EVENSTAR"
opyright (c) 1992-2001 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 4.3-RELEASE #0: Fri Dec 7 19:32:19 CET 2001=0A=
toor@evenstar:/usr/src/sys/compile/EVENSTAR=0A=
Timecounter "i8254" frequency 1193182 Hz=0A=
CPU: AMD Athlon(tm) Processor (1204.30-MHz 686-class CPU)=0A=
Origin =3D "AuthenticAMD" Id =3D 0x642 Stepping =3D 2=0A=
=
Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR>=0A=
AMD Features=3D0xc0440000<<b18>,AMIE,DSP,3DNow!>=0A=
real memory =3D 536805376 (524224K bytes)=0A=
avail memory =3D 519053312 (506888K bytes)=0A=
Preloaded elf kernel "kernel" at 0xc039b000.=0A=
Pentium Pro MTRR support enabled=0A=
md0: Malloc disk=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
pcib0: <Host to PCI bridge> on motherboard=0A=
pci0: <PCI bus> on pcib0=0A=
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at =
device 0.0 on pci0=0A=
pcib1: <PCI to PCI bridge (vendor=3D1106 device=3Db099)> at device 1.0 =
on pci0=0A=
pci1: <PCI bus> on pcib1=0A=
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 5=0A=
tx0: <SMC EtherPower II 10/100> port 0xd400-0xd4ff mem =
0xdfffe000-0xdfffefff irq 10 at device 6.0 on pci0=0A=
miibus0: <MII bus> on tx0=0A=
nsphy0: <AC101 10/100 media interface> on miibus0=0A=
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A=
tx0: address 00:e0:29:8e:75:19, type SMC9432TX_1=0A=
pci0: <unknown card> (vendor=3D0x11de, dev=3D0x6120) at 7.0 irq 10=0A=
bktr0: <BrookTree 878> mem 0xdedfc000-0xdedfcfff irq 11 at device 8.0 on =
pci0=0A=
iicbb0: <I2C generic bit-banging driver> on bti2c0=0A=
iicbus0: <Philips I2C bus> on iicbb0 master-only=0A=
smbus0: <System Management Bus> on bti2c0=0A=
bktr0: Detected a DPL34-1@-@0 at 0x84=0A=
bktr0: AVer Media TV/FM, Philips FR1216 PAL FM tuner, dpl3518a dolby.=0A=
pci0: <unknown card> (vendor=3D0x109e, dev=3D0x0878) at 8.1 irq 11=0A=
pcm0: <Creative EMU10K1> port 0xd000-0xd01f irq 5 at device 9.0 on pci0=0A=
isab0: <PCI to ISA bridge (vendor=3D1106 device=3D3074)> at device 17.0 =
on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <VIA Apollo ATA controller> port 0xff00-0xff0f at device 17.1 =
on pci0=0A=
ata0: at 0x1f0 irq 14 on atapci0=0A=
ata1: at 0x170 irq 15 on atapci0=0A=
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 11 at device =
17.2 on pci0=0A=
usb0: <VIA 83C572 USB controller> on uhci0=0A=
usb0: USB revision 1.0=0A=
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 2 ports with 2 removable, self powered=0A=
uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 11 at device =
17.3 on pci0=0A=
usb1: <VIA 83C572 USB controller> on uhci1=0A=
usb1: USB revision 1.0=0A=
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub1: 2 ports with 2 removable, self powered=0A=
ugen0: Genesys Logic, Inc. USB Host To Host Bridge, rev 1.00/1.80, addr 2=0A=
uhci2: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 11 at device =
17.4 on pci0=0A=
usb2: <VIA 83C572 USB controller> on uhci2=0A=
usb2: USB revision 1.0=0A=
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub2: 2 ports with 2 removable, self powered=0A=
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
kbd0 at atkbd0=0A=
psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
psm0: model IntelliMouse, device ID 3=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 16550A=0A=
sio1 at port 0x2f8-0x2ff irq 3 on isa0=0A=
sio1: type 16550A=0A=
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0=0A=
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode=0A=
ppc0: FIFO with 16/16/9 bytes threshold=0A=
plip0: <PLIP network interface> on ppbus0=0A=
lpt0: <Printer> on ppbus0=0A=
lpt0: Interrupt-driven port=0A=
ppi0: <Parallel I/O> on ppbus0=0A=
ad0: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata0-master WDMA2=0A=
acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-106S 0114> at ata1-master =
using PIO4=0A=
acd1: CD-RW <PLEXTOR CD-R PX-W1210A> at ata1-slave using PIO4=0A=
Mounting root from ufs:/dev/ad0s2a=0A=
xfs: cdev: 128, syscall: 210=0A=
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped=0A=
Waiting (max 60 seconds) for system process `syncer' to stop...stopped=0A=
=0A=
syncing disks... 11 4 1 =0A=
done=0A=
Uptime: 2m13s=0A=
Rebooting...=0A=
Copyright (c) 1992-2001 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 4.3-RELEASE #0: Fri Dec 7 19:32:19 CET 2001=0A=
toor@evenstar:/usr/src/sys/compile/EVENSTAR=0A=
Calibrating clock(s) ... TSC clock: 1204336512 Hz, i8254 clock: 1193231 =
Hz=0A=
CLK_USE_I8254_CALIBRATION not specified - using default frequency=0A=
Timecounter "i8254" frequency 1193182 Hz=0A=
CLK_USE_TSC_CALIBRATION not specified - using old calibration method=0A=
CPU: AMD Athlon(tm) Processor (1204.30-MHz 686-class CPU)=0A=
Origin =3D "AuthenticAMD" Id =3D 0x642 Stepping =3D 2=0A=
=
Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR>=0A=
AMD Features=3D0xc0440000<<b18>,AMIE,DSP,3DNow!>=0A=
Data TLB: 24 entries, fully associative=0A=
Instruction TLB: 16 entries, fully associative=0A=
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative=0A=
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way =
associative=0A=
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way =
associative=0A=
real memory =3D 536805376 (524224K bytes)=0A=
Physical memory chunk(s):=0A=
0x00001000 - 0x0009efff, 647168 bytes (158 pages)=0A=
0x003c1000 - 0x1ffe7fff, 532836352 bytes (130087 pages)=0A=
avail memory =3D 519053312 (506888K bytes)=0A=
bios32: Found BIOS32 Service Directory header at 0xc00fdb20=0A=
bios32: Entry =3D 0xfdb30 (c00fdb30) Rev =3D 0 Len =3D 1=0A=
pcibios: PCI BIOS entry at 0xdb51=0A=
pnpbios: Found PnP BIOS data at 0xc00f77d0=0A=
pnpbios: Entry =3D f0000:6844 Rev =3D 1.0=0A=
Other BIOS signatures found:=0A=
ACPI: 000fc3f0=0A=
Preloaded elf kernel "kernel" at 0xc039b000.=0A=
Pentium Pro MTRR support enabled=0A=
md0: Malloc disk=0A=
Creating DISK md0=0A=
pci_open(1): mode 1 addr port (0x0cf8) is 0x800000f8=0A=
pci_open(1a): mode1res=3D0x80000000 (0x80000000)=0A=
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there =
(id=3D30991106)=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000=0A=
pci_open(1a): mode1res=3D0x80000000 (0x80000000)=0A=
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there =
(id=3D30991106)=0A=
pcib0: <Host to PCI bridge> on motherboard=0A=
found-> vendor=3D0x1106, dev=3D0x3099, revid=3D0x00=0A=
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
map[10]: type 1, range 32, base e0000000, size 26=0A=
found-> vendor=3D0x1106, dev=3D0xb099, revid=3D0x00=0A=
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0=0A=
subordinatebus=3D1 secondarybus=3D1=0A=
found-> vendor=3D0x10b8, dev=3D0x0005, revid=3D0x09=0A=
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Da, irq=3D10=0A=
map[10]: type 1, range 32, base 0000d400, size 8=0A=
map[14]: type 1, range 32, base dfffe000, size 12=0A=
found-> vendor=3D0x11de, dev=3D0x6120, revid=3D0x03=0A=
class=3D04-00-00, hdrtype=3D0x00, mfdev=3D0=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Da, irq=3D10=0A=
map[10]: type 1, range 32, base dfffd000, size 12=0A=
found-> vendor=3D0x109e, dev=3D0x036e, revid=3D0x02=0A=
class=3D04-00-00, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Da, irq=3D11=0A=
map[10]: type 1, range 32, base dedfc000, size 12=0A=
found-> vendor=3D0x109e, dev=3D0x0878, revid=3D0x02=0A=
class=3D04-80-00, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Da, irq=3D11=0A=
map[10]: type 1, range 32, base dedfd000, size 12=0A=
found-> vendor=3D0x1102, dev=3D0x0002, revid=3D0x08=0A=
class=3D04-01-00, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Da, irq=3D5=0A=
map[10]: type 1, range 32, base 0000d000, size 5=0A=
found-> vendor=3D0x1102, dev=3D0x7002, revid=3D0x08=0A=
class=3D09-80-00, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
map[10]: type 1, range 32, base 0000d800, size 3=0A=
found-> vendor=3D0x1106, dev=3D0x3074, revid=3D0x00=0A=
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
found-> vendor=3D0x1106, dev=3D0x0571, revid=3D0x06=0A=
class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
map[20]: type 1, range 32, base 0000ff00, size 4=0A=
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x18=0A=
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Dd, irq=3D11=0A=
map[20]: type 1, range 32, base 0000c400, size 5=0A=
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x18=0A=
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Dd, irq=3D11=0A=
map[20]: type 1, range 32, base 0000c800, size 5=0A=
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x18=0A=
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Dd, irq=3D11=0A=
map[20]: type 1, range 32, base 0000cc00, size 5=0A=
pci0: <PCI bus> on pcib0=0A=
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at =
device 0.0 on pci0=0A=
agp0: allocating GATT for aperture of size 256M=0A=
pcib1: <PCI to PCI bridge (vendor=3D1106 device=3Db099)> at device 1.0 =
on pci0=0A=
found-> vendor=3D0x102b, dev=3D0x0525, revid=3D0x82=0A=
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Da, irq=3D5=0A=
map[10]: type 1, range 32, base dc000000, size 25=0A=
map[14]: type 1, range 32, base dfefc000, size 14=0A=
map[18]: type 1, range 32, base df000000, size 23=0A=
pci1: <PCI bus> on pcib1=0A=
pci1: <Matrox MGA G400 AGP graphics accelerator> (vendor=3D0x102b, =
dev=3D0x0525) at 0.0 irq 5=0A=
tx0: <SMC EtherPower II 10/100> port 0xd400-0xd4ff mem =
0xdfffe000-0xdfffefff irq 10 at device 6.0 on pci0=0A=
miibus0: <MII bus> on tx0=0A=
nsphy0: <AC101 10/100 media interface> on miibus0=0A=
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A=
tx0: address 00:e0:29:8e:75:19, type SMC9432TX_1=0A=
bpf: tx0 attached=0A=
pci0: <unknown card> (vendor=3D0x11de, dev=3D0x6120) at 7.0 irq 10=0A=
bktr0: <BrookTree 878> mem 0xdedfc000-0xdedfcfff irq 11 at device 8.0 on =
pci0=0A=
iicbb0: <I2C generic bit-banging driver> on bti2c0=0A=
iicbus0: <Philips I2C bus> on iicbb0 master-only=0A=
iicbus: iic devclass not found=0A=
smbus0: <System Management Bus> on bti2c0=0A=
smbus: smb devclass not found=0A=
brooktree0: PCI bus latency is 64.=0A=
bktr0: buffer size 3555328, addr 0x5000000=0A=
bktr0: GPIO is 0x00f477c3=0A=
bktr0: subsystem 0x1461 0x0003=0A=
bktr0: Detected a DPL34-1@-@0 at 0x84=0A=
bktr0: AVer Media TV/FM, Philips FR1216 PAL FM tuner, dpl3518a dolby.=0A=
pci0: <unknown card> (vendor=3D0x109e, dev=3D0x0878) at 8.1 irq 11=0A=
pcm0: <Creative EMU10K1> port 0xd000-0xd01f irq 5 at device 9.0 on pci0=0A=
emu: setmap (41000, 800), nseg=3D1, error=3D0=0A=
emu: setmap (3c1000, 1000), nseg=3D1, error=3D0=0A=
pcm0: ac97 codec id 0x54524123=0A=
pcm0: ac97 codec features 5 bit master volume, no 3D Stereo Enhancement=0A=
emu: setmap (401000, 1000), nseg=3D1, error=3D0=0A=
emu: setmap (441000, 1000), nseg=3D1, error=3D0=0A=
emu: setmap (481000, 1000), nseg=3D1, error=3D0=0A=
emu: setmap (4c1000, 1000), nseg=3D1, error=3D0=0A=
pcm: setmap 501000, 1000; 0xd7031000 -> 501000=0A=
pcm: setmap 541000, 1000; 0xd7071000 -> 541000=0A=
pcm: setmap 581000, 1000; 0xd70b1000 -> 581000=0A=
isab0: <PCI to ISA bridge (vendor=3D1106 device=3D3074)> at device 17.0 =
on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <VIA Apollo ATA controller> port 0xff00-0xff0f at device 17.1 =
on pci0=0A=
ata0: iobase=3D0x01f0 altiobase=3D0x03f6 bmaddr=3D0xff00=0A=
ata0: mask=3D03 status0=3D50 status1=3D00=0A=
ata0: mask=3D03 ostat0=3D50 ostat2=3D00=0A=
ata0-master: ATAPI probe a=3D00 b=3D00=0A=
ata0-slave: ATAPI probe a=3D00 b=3D00=0A=
ata0: mask=3D03 status0=3D50 status1=3D00=0A=
ata0-master: ATA probe a=3D01 b=3Da5=0A=
ata0: devices=3D01=0A=
ata0: at 0x1f0 irq 14 on atapci0=0A=
ata1: iobase=3D0x0170 altiobase=3D0x0376 bmaddr=3D0xff08=0A=
ata1: mask=3D03 status0=3D50 status1=3D50=0A=
ata1: mask=3D03 ostat0=3D50 ostat2=3D50=0A=
ata1-master: ATAPI probe a=3D14 b=3Deb=0A=
ata1-slave: ATAPI probe a=3D14 b=3Deb=0A=
ata1: mask=3D03 status0=3D00 status1=3D00=0A=
ata1: devices=3D0c=0A=
ata1: at 0x170 irq 15 on atapci0=0A=
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 11 at device =
17.2 on pci0=0A=
using shared irq11.=0A=
usb0: <VIA 83C572 USB controller> on uhci0=0A=
usb0: USB revision 1.0=0A=
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 2 ports with 2 removable, self powered=0A=
uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 11 at device =
17.3 on pci0=0A=
usb1: <VIA 83C572 USB controller> on uhci1=0A=
usb1: USB revision 1.0=0A=
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub1: 2 ports with 2 removable, self powered=0A=
ugen0: Genesys Logic, Inc. USB Host To Host Bridge, rev 1.00/1.80, addr 2=0A=
uhci2: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 11 at device =
17.4 on pci0=0A=
usb2: <VIA 83C572 USB controller> on uhci2=0A=
usb2: USB revision 1.0=0A=
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub2: 2 ports with 2 removable, self powered=0A=
ata-: ata0 exists, using next available unit number=0A=
ata-: ata1 exists, using next available unit number=0A=
Trying Read_Port at 203=0A=
Trying Read_Port at 243=0A=
Trying Read_Port at 283=0A=
Trying Read_Port at 2c3=0A=
Trying Read_Port at 303=0A=
Trying Read_Port at 343=0A=
Trying Read_Port at 383=0A=
Trying Read_Port at 3c3=0A=
isa_probe_children: disabling PnP devices=0A=
isa_probe_children: probing non-PnP devices=0A=
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
ata2 failed to probe at port 0x1f0 irq 14 on isa0=0A=
ata3 failed to probe at port 0x170 irq 15 on isa0=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
atkbd: the current kbd controller command byte 0065=0A=
atkbd: keyboard ID 0x41ab (2)=0A=
kbd0 at atkbd0=0A=
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000=0A=
psm0: current command byte:0065=0A=
psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
psm0: model IntelliMouse, device ID 3-00, 3 buttons=0A=
psm0: config:00000000, flags:00000000, packet size:4=0A=
psm0: syncmask:08, syncbits:08=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
fb0: vga0, vga, type:VGA (5), flags:0x7007f=0A=
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000=0A=
fb0: init mode:24, bios mode:3, current mode:24=0A=
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k=0A=
VGA parameters upon power-up=0A=
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 =0A=
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 =0A=
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c =0A=
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff =0A=
VGA parameters in BIOS for mode 24=0A=
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 =0A=
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 =0A=
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c =0A=
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff =0A=
EGA/VGA parameters to be used for mode 24=0A=
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 =0A=
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 =0A=
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c =0A=
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff =0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)=0A=
sio0: irq maps: 0x61 0x71 0x61 0x61=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 16550A=0A=
sio1: irq maps: 0x61 0x69 0x61 0x61=0A=
sio1 at port 0x2f8-0x2ff irq 3 on isa0=0A=
sio1: type 16550A=0A=
ppc0: parallel port found at 0x378=0A=
ppc0: using extended I/O port range=0A=
ppc0: ECP SPP ECP+EPP SPP=0A=
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0=0A=
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode=0A=
ppc0: FIFO with 16/16/9 bytes threshold=0A=
plip0: <PLIP network interface> on ppbus0=0A=
bpf: lp0 attached=0A=
lpt0: <Printer> on ppbus0=0A=
lpt0: Interrupt-driven port=0A=
ppi0: <Parallel I/O> on ppbus0=0A=
isa_probe_children: probing PnP devices=0A=
BIOS Geometries:=0A=
0:03fefe3f 0..1022=3D1023 cylinders, 0..254=3D255 heads, 1..63=3D63 =
sectors=0A=
0 accounted for=0A=
Device configuration finished.=0A=
bpf: faith0 attached=0A=
bpf: gif0 attached=0A=
bpf: gif1 attached=0A=
bpf: gif2 attached=0A=
bpf: gif3 attached=0A=
bpf: lo0 attached=0A=
ata0-master: success setting WDMA2 on VIA chip=0A=
Creating DISK ad0=0A=
Creating DISK wd0=0A=
ad0: <IC35L060AVER07-0/ER6OA41A> ATA-5 disk at ata0-master=0A=
ad0: 58644MB (120103200 sectors), 119150 cyls, 16 heads, 63 S/T, 512 B/S=0A=
ad0: 16 secs/int, 1 depth queue, WDMA2=0A=
ad0: piomode=3D4 dmamode=3D2 udmamode=3D5 cblid=3D1=0A=
ad0: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata0-master WDMA2=0A=
ata1-master: piomode=3D4 dmamode=3D2 udmamode=3D4 dmaflag=3D1=0A=
ata1-master: success setting PIO4 on generic chip=0A=
acd0: <Pioneer DVD-ROM ATAPIModel DVD-106S 0114/E1.14> DVD-ROM drive at =
ata1 as master=0A=
acd0: read 6875KB/s (6875KB/s), 256KB buffer, PIO4=0A=
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet=0A=
acd0: Audio: play, 256 volume levels=0A=
acd0: Mechanism: ejectable tray=0A=
acd0: Medium: no/blank disc inside, unlocked=0A=
ata1-slave: piomode=3D4 dmamode=3D2 udmamode=3D-1 dmaflag=3D1=0A=
ata1-slave: success setting PIO4 on generic chip=0A=
acd1: <PLEXTOR CD-R PX-W1210A/1.08> CD-RW drive at ata1 as slave=0A=
acd1: read 5512KB/s (5512KB/s) write 2067KB/s (2067KB/s), 2048KB buffer, =
PIO4=0A=
acd1: Reads: CD-R, CD-RW, CD-DA stream, packet=0A=
acd1: Writes: CD-R, CD-RW, test write=0A=
acd1: Audio: play, 256 volume levels=0A=
acd1: Mechanism: ejectable tray=0A=
acd1: Medium: CD-ROM unknown medium, unlocked=0A=
Mounting root from ufs:/dev/ad0s2a=0A=
ad0s1: type 0x7, start 63, end =3D 40965749, size 40965687 : OK=0A=
ad0s2: type 0xa5, start 40965750, end =3D 65529134, size 24563385 =0A=
ad0s2: C/H/S start 1023/0/1 (16434495) !=3D start 40965750: invalid=0A=
ad0s3: type 0x83, start 65529135, end =3D 79891244, size 14362110 =0A=
ad0s3: C/H/S start 1023/0/1 (16434495) !=3D start 65529135: invalid=0A=
ad0s4: type 0x5, start 79891245, end =3D 120101939, size 40210695 : OK=0A=
ad0s5: type 0x82, start 79891308, end =3D 80951534, size 1060227 : OK=0A=
ad0<extended>: type 0x5, start 80951535, end =3D 120101939, size =
39150405 =0A=
ad0<extended>: C/H/S start 1023/0/1 (16434495) !=3D start 80951535: =
invalid=0A=
ad0s6: type 0x7, start 80951598, end =3D 120101939, size 39150342 : OK=0A=
start_init: trying /sbin/init=0A=
Linux-ELF exec handler installed=0A=
xfs: cdev: 128, syscall: 210=0A=
------=_NextPart_000_0004_01C18993.67DBF230
Content-Type: application/octet-stream;
name="EVENSTAR"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="EVENSTAR"
#=0A=
# evenstar kernel confg by hopet=0A=
#=0A=
=0A=
machine i386=0A=
cpu I686_CPU=0A=
ident EVENSTAR=0A=
maxusers 32=0A=
=0A=
options INET #InterNETworking=0A=
options INET6 #IPv6 communications protocols=0A=
options FFS #Berkeley Fast Filesystem=0A=
options FFS_ROOT #FFS usable as root device [keep this!]=0A=
options SOFTUPDATES #Enable FFS soft updates support=0A=
options NFS #Network Filesystem=0A=
options MSDOSFS #MSDOS Filesystem=0A=
options CD9660 #ISO 9660 Filesystem=0A=
options CD9660_ROOT #CD-ROM usable as root, CD9660 required=0A=
options PROCFS #Process filesystem=0A=
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]=0A=
options UCONSOLE #Allow users to grab the console=0A=
options USERCONFIG #boot -c editor=0A=
options VISUAL_USERCONFIG #visual boot -c editor=0A=
options KTRACE #ktrace(1) support=0A=
options SYSVSHM #SYSV-style shared memory=0A=
options SYSVMSG #SYSV-style message queues=0A=
options SYSVSEM #SYSV-style semaphores=0A=
options P1003_1B #Posix P1003_1B real-time extensions=0A=
options _KPOSIX_PRIORITY_SCHEDULING=0A=
options ICMP_BANDLIM #Rate limit bad replies=0A=
options KBD_INSTALL_CDEV # install a CDEV entry in /dev=0A=
options USER_LDT # kvuli avifile=0A=
=0A=
device isa=0A=
device pci=0A=
device agp=0A=
=0A=
# Floppy drives=0A=
device fdc0 at isa? port IO_FD1 irq 6 drq 2=0A=
device fd0 at fdc0 drive 0=0A=
device fd1 at fdc0 drive 1=0A=
=0A=
# ATA and ATAPI devices=0A=
device ata0 at isa? port IO_WD1 irq 14=0A=
device ata1 at isa? port IO_WD2 irq 15=0A=
device ata=0A=
device atadisk # ATA disk drives=0A=
device atapicd # ATAPI CDROM drives=0A=
options ATA_STATIC_ID #Static device numbering=0A=
# options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI device=0A=
=0A=
# atkbdc0 controls both the keyboard and the PS/2 mouse=0A=
device atkbdc0 at isa? port IO_KBD=0A=
device atkbd0 at atkbdc? irq 1 flags 0x1=0A=
device psm0 at atkbdc? irq 12=0A=
=0A=
device vga0 at isa?=0A=
=0A=
# splash screen/screen saver=0A=
pseudo-device splash=0A=
=0A=
# syscons is the default console driver, resembling an SCO console=0A=
device sc0 at isa? flags 0x100=0A=
=0A=
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver=0A=
#device vt0 at isa?=0A=
#options XSERVER # support for X server on a vt console=0A=
#options FAT_CURSOR # start with block cursor=0A=
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT =
lines=0A=
#options PCVT_SCANSET=3D2 # IBM keyboards are non-std=0A=
=0A=
# Floating point support - do not disable.=0A=
device npx0 at nexus? port IO_NPX irq 13=0A=
=0A=
# Power management support (see LINT for more options)=0A=
device apm0 at nexus? disable flags 0x20 # Advanced Power Management=0A=
=0A=
# Serial (COM) ports=0A=
device sio0 at isa? port IO_COM1 flags 0x10 irq 4=0A=
device sio1 at isa? port IO_COM2 irq 3=0A=
=0A=
# Parallel port=0A=
device ppc0 at isa? irq 7=0A=
device ppbus # Parallel port bus (required)=0A=
device lpt # Printer=0A=
device plip # TCP/IP over parallel=0A=
device ppi # Parallel port interface device=0A=
#device vpo # Requires scbus and da=0A=
=0A=
=0A=
# PCI Ethernet NICs.=0A=
device miibus # MII bus support=0A=
device tx # SMC 9432TX (83c170 ``EPIC'')=0A=
=0A=
# Pseudo devices - the number indicates how many units to allocate.=0A=
pseudo-device loop # Network loopback=0A=
pseudo-device ether # Ethernet support=0A=
pseudo-device tun # Packet tunnel.=0A=
pseudo-device pty # Pseudo-ttys (telnet etc)=0A=
pseudo-device md # Memory "disks"=0A=
pseudo-device gif 4 # IPv6 and IPv4 tunneling=0A=
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)=0A=
=0A=
# The `bpf' pseudo-device enables the Berkeley Packet Filter.=0A=
# Be aware of the administrative consequences of enabling this!=0A=
pseudo-device bpf #Berkeley packet filter=0A=
=0A=
# USB support=0A=
device uhci # UHCI PCI->USB interface=0A=
device ohci # OHCI PCI->USB interface=0A=
device usb # USB Bus (required)=0A=
device ugen # Generic=0A=
device uhid # "Human Interface Devices"=0A=
device ukbd # Keyboard=0A=
device ulpt # Printer=0A=
device scbus=0A=
device da=0A=
device umass # Disks/Mass storage - Requires scbus and da=0A=
device ums # Mouse=0A=
device uscanner # Scanners=0A=
=0A=
# Sound=0A=
# Tohle jsou nove drivery - pcm - nechodi mikrofon, jinak ano=0A=
device pcm=0A=
device sbc=0A=
# Tohle jsou stare drivery - nefunguji :-(=0A=
# device snd=0A=
# device sb0 at isa? port 0x220 irq 5 drq 1=0A=
# device sbxvi0 at isa? drq 5=0A=
# device sbmidi0 at isa? port 0x330=0A=
# device awe0 at isa? port 0x620=0A=
# device opl0 at isa? port 0x388=0A=
=0A=
# grabovaci karta=0A=
device smbus=0A=
device iicbus=0A=
device iicbb=0A=
device bktr=0A=
=0A=
# gigabitova karta - vytazeno z -CURRENTu=0A=
# device nge=0A=
------=_NextPart_000_0004_01C18993.67DBF230--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000301c1898b$06160390$50eb6cc2>