Date: Thu, 09 Nov 2006 10:13:16 +0200 From: Sergey Solyanik <solik@chereda.net> To: freebsd-stable@freebsd.org Subject: fxp(4) and Intel 82801GB NIC Message-ID: <4552E31C.9080003@chereda.net>
next in thread | raw e-mail | index | archive | help
Hello!
I have a problem with my -STABLE, fxp(4) doesn't detect available media
in the Intel 82801GB onboard NIC. It shows that:
solik@solik$ ifconfig fxp1
fxp1: flags=9943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,LINK0,MULTICAST>
mtu 1500
options=8<VLAN_MTU>
inet 192.168.250.1 netmask 0xffffff00 broadcast 192.168.250.255
ether 00:14:85:1a:fc:d3
media: Ethernet manual
solik@solik$ ifconfig -m fxp1
fxp1: flags=9943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,LINK0,MULTICAST>
mtu 1500
options=8<VLAN_MTU>
capabilities=8<VLAN_MTU>
inet 192.168.250.1 netmask 0xffffff00 broadcast 192.168.250.255
ether 00:14:85:1a:fc:d3
media: Ethernet manual
supported media:
media manual
The NIC working (100M/Full) when plugged in switch (Cisco 2950), but
doesn't when connected with another one with crossover cable, or to the
wireless AP (D-Link DWL-2100AP) which do autodetection of speed MDI-X/MDI.
The link continually flapping up and down.
Running Windows XP I can manually select 100M/Full media to link up. But
I can't do that with FreeBSD.
Here is the part of pciconf -lv output:
[...]
fxp1@pci2:8:0: class=0x020000 card=0xe0141631 chip=0x27dc8086 rev=0x01
hdr=0x00
vendor = 'Intel Corporation'
device = '82801GB I/O Controller Hub LAN'
class = network
subclass = ethernet
Please help me to fix it. I will test patches.
Thanks!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4552E31C.9080003>